Simplicity SNAPPER DUAL STAGE SNOWTHROWER, 9.0TP 24" Användarmanual

Kategori
Snöslungor
Typ
Användarmanual
Walkbehind Snowthrower
1738640
Revision B
11/2009
en
Operator’s Manual
Bedienungsanleitung
de
Manuale dell’Operatore
fr
Brukerhåndbok
it
no
Manuel d’utilisation
sv
Instruktionsbok
Mfg. No. Description
1695670 Dual Stage Snowthrower, 9.0 TP, 24 Inch (61,0 cm)
Not for
Reproduction
Not for
Reproduction
2
Not for
Reproduction
Not for
Reproduction
B
2
3
A B
C
4
A
5
E
A
B
D
C
3
1See Page 15.
6
AB
C
E
D
Not for
Reproduction
Not for
Reproduction
4
12
Free-HandTM Control
127
A
D
C
B
8
A
C
AD
C
See Pages 18 and 19.
11
B
13
A
B
9
A
C
B
10
Not for
Reproduction
Not for
Reproduction
5
14
A
FULL
15
A
A
16
17
C
B
A
18
19
20
A
A
B
B
A
Not for
Reproduction
Not for
Reproduction
21
A
22
C
A
B
B
23
C
A
24
Full
25 A
26
A
27
28
A
B
C
B
B
E
DA
C
B C
6
C
A
B
Not for
Reproduction
Not for
Reproduction
1/2” (12.5mm)
Deflection
83
7
.030 in.
(.76 mm)
29
30
B
A
31
B
A
32
A
33
34
1/32”
(0.8mm)
1/8” (3mm)
Screw
A B
C
A
35 D
E
A
C
B
F
B
C
Not for
Reproduction
Not for
Reproduction
8
37
A
C
B
“A”
38
39
D
A
A
40
41 A
B
C
36
B
A
Not for
Reproduction
Not for
Reproduction
9
CONTENTS
Illustrations ...........................................................................................3
Operator Safety......................................................................................10
Assembly.............................................................................................16
Features and Controls..............................................................................18
Operation.............................................................................................20
Maintenance.........................................................................................24
Storage ...............................................................................................29
Troubleshooting .....................................................................................30
Warranty .............................................................................................32
Specifications .......................................................................................33
General Information
Thank you for purchasing this quality-built Snapper snowthrower. We’re pleased that you’ve placed your confidence in the Snapper
brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of
dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with snowthrowers and how to avoid
them. This snowthrower is designed and intended only for snow throwing and is not intended for any other purpose. It is important that
you read and understand these instructions throughly before attempting to start or operate this equipment. This snowthrower requires
final assembly before use. Refer to the Assembly section for instructions on final assembly procedures. Follow the instructions
completely. Save these instructions for future reference.
Record your model name/number, manufacturer’s identification
numbers, and engine serial numbers in the space provided for
easy access. These numbers can be found in the locations
shown.
When contacting your authorized dealer for replacement
parts, service, or information you MUST have these numbers.
A. Manufacturer’s Identification Number
B. Manufacturer’s Serial Number
C. Power Rating in Kilowatts
D. Maximum Engine Speed in Rotations per Minute
E. Manufacturer’s Name and Address
F. Year of Manufacture
G. CE Compliance Logo
H. Mass of Unit in Kilograms
I. Guaranteed Sound Power in Decibels
Part No. xxxxxxx
xxxxxxxxxxxxxxx
Serial No. xxxxxxxxxx
20xx
kW: x.xx
xxxx max
xxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxx
xxx dB
kg: xxx
A
B
C
D
E
FG
H
I
PRODUCT REFERENCE DATA
Model Description Name/Number
Unit MFG Number Unit SERIAL Number
Mower Deck MFG Number Mower Deck SERIAL Number
Dealer Name Date Purchased
ENGINE REFERENCE DATA
Engine Make Engine Model
Engine Type/Spec Engine Code/Serial Number
CE Identification Tag
Product Reference Data
The Illustrated Parts List for this machine can be downloaded from www.snapper.com. Please provide model and serial number when
ordering replacement parts.
Copyright © 2009 Briggs & Stratton Power Products Group, LLC
Milwaukee, WI, All rights reserved.
SNAPPER is a trademark of Briggs & Stratton Power Products
Group, LLC Milwaukee, WI USA.
Not for
Reproduction
Not for
Reproduction
10
OPERATOR SAFETY
The safety alert symbol and signal word (DANGER,
WARNING, CAUTION, or NOTICE) is used to indicate the likeli-
hood and potential severity of personal injury and/or damage to
the product. In addition, a hazard symbol may be used to
represent the type of hazard.
Safety Alert Symbol and Signal Words
DANGER indicates a hazard which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazard which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazard which, if not avoided, could
result in minor or moderate injury.
NOTICE indicates a situation that could result in damage
to the product.
DANGER - Amputation Hazard
The discharge chute contains a rotating
impeller to throw snow. Never clear or unclog
the discharge chute with your hands. Fingers
can quickly become caught and traumatic
amputation or severe laceration will result.
Always use a clean-out tool to clear or unclog
the discharge chute.
Safety Alert – Identifies safety information about
hazards that can result in personal injury.
Operator’s Manual – Read and understand before
performing any activity or running snowthrower.
Rotating Impeller Keep a Safe
Distance from
Snowthrower
Rotating Auger Rotating Gears
Never Reach into
Rotating Parts Thrown Objects
Fire Explosion
Shock Toxic Fumes
Hot Surface Recommended
Ear Protection for
Extended Use
Shut off engine and remove spark plug connector
before performing maintenance or repair work.
Hazard Symbols and Meanings
DANGER
Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated with
snowthrowers.
This snowthrower is capable of amputating hands and feet,
and throwing objects. Read and observe all the safety
instructions in this manual. Failure to do so will result in
death or serious injury.
WARNING
U.S.A. Models: Certain components in this product and its
related accessories contain chemicals known to the state of
of California to cause cancer, birth defects, or other repro-
ductive harm. Wash hands after handling.
WARNING
U.S.A. Models: The engine exhaust from this product con-
tains chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
WARNING
U.S.A. Models: Battery posts, terminals, and related acces-
sories contain lead and lead components - chemicals known
to the State of California to cause cancer and reproductive
harm. Wash hands after handling.
Certification: This equipment meets the requirements of ANSI
B71.3-2005 for snowthrowers.
www.snapper.com
Not for
Reproduction
Not for
Reproduction
OPERATOR SAFETY
Oil
Fuel Forward
On Off Neutral
Choke Off Reverse
Choke On
Stop Electric Start -
Engage (Down) &
Disengage (Up)
Slow Engine - Run
Fast
STOP
Engine - Stop
Traction Control -
Engage (Down) Auger Control -
Engage (Down)
Auger Clutch Chute Deflector
(Up and Down)
Discharge Chute
(Left and Right) Heated Hand Grips
(High and Low)
Control Symbols on Equipment
12
Free-HandTM Control
Easy-TurnTM Traction Control
Be thoroughly familiar with the controls and the proper use of the snow
thrower.
Make sure you are properly trained before operating the snowthrower.
Know how to stop the unit and disengage the controls quickly.
Never allow anyone to operate the snowthrower without proper instruction.
Always follow the instructions in the operator’s manual, if the snowthrower
will be stored for an extende d period.
Maintain or replace safety and instruction labels as necessary.
Never attempt to make major repairs on the snowthrower unless you have
been properly trained. Improper servicing of the snowthrower can result
in hazardous operation, equipment damage, and voiding of the product
warranty.
DANGER
Read, understand, and follow all the instructions on the
snowthrower and in the operator’s manual before operating
this unit.
Failure to observe the safet y instructions in this manual will
result in death or serious injury.
Read the Manual
TO SAFELY CLEAR A CLOGGED DISCHARGE CHUTE
DANGER: Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated with snow
throwers. Never use your hands to clean out the discharge chute.
FOLLOW THESE INSTRUCTIONS:
1. Shut OFF the engine.
2. Wait 10 seconds to be sure the impeller blades have stopped rotating.
3. Always use a clean-out tool, not your hands.
DANGER
Discharge chute contains rotating impeller to throw snow.
Never clear or unclog the discharge chute with your hands.
Fingers can quickly become caught in the impeller. Always
use a clean-out tool.
Failure to observe these safety instructions will result in
traumatic amputation or severe laceration.
Discharge Chute
NOTE: Not all control symbols shown on this page will appear
on your snowthrower. See FEATURES AND CONTROLS section
for the applicable symbols.
11
Not for
Reproduction
Not for
Reproduction
WHEN ADDING FUEL
Turn off engine and let cool at least 2 minutes before removing the fuel
cap and adding fuel.
Fill fuel tank outdoors or in a well ventilated area.
Do not overfill the fuel tank. To allow for the expansion of gasoline, do not fill
above the bottom of the fuel tank neck.
Keep fuel away from sparks, open flames, pilot lights, heat, and other
ignition sources.
Check fuel lines, cap, and fittings frequently for cracks or leaks. Replace if
necessary.
Use an approved fuel container.
If fuel spills, wait until it evaporates before starting engine.
WHEN STARTING ENGINE
Ensure that spark plug, muffler, fuel cap, and air cleaner (if equipped) are in
place and secured.
Do not crank the engine with the spark plug removed.
If fuel is spilled, do not attempt to start the engine, but move the snow
thrower away from the area of the spill, and avoid creating any source of
ignition, until the fuel vapors have dissipated.
Do not over-prime the engine. Follow the engine starting instructions in this
manual.
If the engine floods, set choke (if equipped) to OPEN/RUN position, move
throttle (if equipped) to FAST position and crank until engine starts.
WHEN OPERATING EQUIPMENT
Do not tip the snowthrower at an angle which causes the fuel to spill.
Do not choke the carburetor to stop the engine.
Never run the engine with the air cleaner assembly (if equipped) or the air
filter (if equipped) removed.
WHEN CHANGING OIL
If you drain the oil from the top oil fill tube, the fuel tank must be empty or
fuel can leak out and result in a fire or explosion.
WHEN TRANSPORTING EQUIPMENT
Transport with fuel tank EMPTY, or with fuel shut-off valve OFF.
WHEN STORING GASOLINE OR EQUIPMENT WITH FUEL IN TANK
Store away from furnaces, stoves, water heaters, or other appliances that have
pilot light or other ignition source because they can ignite fuel vapors.
DANGER
Fuel and its vapors are extremely flammable and explosive.
Always handle fuel with extreme care.
Failure to observe these safety instructions can cause a fire
or explosion which will result in severe burns or death.
Fuel Handling
Keep the area of operation clear of all persons, particularly small children
and pets.
Thoroughly inspect the area where the snowthrower will be used and remove
all doormats, sleds, boards, wires, and other foreign objects.
Do not operate the snowthrower without wearing adequate winter clothing.
Wear footwear that will improve footing on slippery surfaces.
Use caution to avoid slipping or falling especially when operating the
snowthrower in reverse.
Never operate the snowthrower without good visibility or light. Always be
sure of your footing, and keep a firm hold on the handles.
Do not clear snow across the face of slopes. Use extreme caution when
changing direction on slopes. Do not attempt to clear steep slopes.
Do not overload the machine capacity by attempting to clear snow too
quickly.
Never operate the snowthrower at high transport speeds on slippery
surfaces. Look behind the snowthrower and use care when operating in
reverse.
Do not use the snowthrower on surfaces above ground level such as roofs of
residences, garages, porches, or other such structures or buildings.
Operators should evaluate their ability to operate the snowthrower safely
enough to protect themselves and others from injury.
The snowthrower is intended to remove snow only. Do not use the snow
thrower for any other purpose.
Do not carry passengers.
After striking a foreign object, shut OFF the engine, disconnect the cord on
electric motors, thoroughly inspect the snowthrower for any damage, and
repair the damage before restarting and operating the snowthrower.
If the snowthrower vibrates abnormally, shut OFF the engine. Vibration is
generally a warning of trouble. See an authorized dealer if necessary for
repairs.
For models equipped with electric starting motors, disconnect the power
cord after the engine starts.
DANGER
This snowthrower is only as safe as the operator. If it is
misused, or not properly maintained, it can be dangerous.
Remember you are responsible for your safety and that of
those around you.
Operation and Equipment Safety
OPERATOR SAFETY
12 www.snapper.com
Not for
Reproduction
Not for
Reproduction
Keep children out of the area during operation. Children are often attracted to
the equipment. Be mindful of all persons present.
Be alert and turn unit off if children enter the area.
Never allow children to operate the unit.
Use extra care when approaching blind corners, shrubs, trees, or other
objects that may obscure vision. Children may be present.
DANGER
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the operating activity. Never assume that children will
remain where you last saw them.
Children
Start and run engine outdoors.
Do not run the engine in an enclosed area, even if doors or windows are
open.
DANGER
Engines give off carbon monoxide, an odorless, colorless,
poison gas.
Breathing carbon monoxide can cause nausea, fainting,
or death.
Engine Safety
Disengage all clutches and shift into neutral before starting the engine.
Let the engine adjust to outdoor temperatures before starting to clear snow.
Use a grounded three-wire plug-in for all snowthrowers equipped with
electric drive motors or electric starting motors.
DANGER
Safe operation of the snowthrower requires the proper care
and maintenance of the engine. Failure to observe the safety
instructions in this manual will result in death or serious
injury.
Always wear safety glasses or eye shields while during operation, and while
performing an adjustment or repair.
Always be aware of the direction the snow is being thrown. Nearby
pedestrians, pets, or property may be harmed by objects being thrown.
Be aware of your environment while operating the snowthrower. Running
over items such as, gravel, doormats, newspapers, toys, and rocks hidden
under snow, can all be thrown from the chute or jam in the auger.
Use extreme caution when operating on or crossing gravel drives, walks, or
roads.
Adjust the collector housing height to clear gravel or crushed rock surface.
Never operate the snowthrower near glass enclosures, automobiles, window
wells, drop-offs, and the like without proper adjustment of the discharge
chute angle.
Familiarize yourself with the area in which you plan to operate the snow
thrower. Mark off boundaries of walkways and driveways.
DANGER
Objects can be picked up by auger and thrown from chute.
Never discharge snow toward bystanders or allow anyone in
front of the snowthrower. Failure to observe these safety
instructions will result in death or serious injury.
Thrown Objects
Whenever cleaning, repairing, or inspecting the snowthrower, make sure the
engine is OFF, spark plug wire is disconnected, and all moving parts have
stopped.
Do not put hands or feet near or under rotating parts. Keep clear of the
discharge opening at all times.
Never operate the snowthrower without proper guards, and other safety
devices in place and working.
Never leave the snowthrower unattended while engine is running. Always
disengage the auger and traction controls, stop engine, and remove keys.
Keep all loose clothing away from the front of the snowthrower and auger.
Scarves, mittens, dangling drawstrings, loose clothes, and pants can quickly
become caught in the rotating device and amputation will occur. Tie up
long hair and remove jewelry.
Run the machine a few minutes after discharging snow to prevent freeze-up
of the collector/impeller.
Disengage power to the collector/impeller when snowthrower is transported
or not in use.
DANGER
Keep hands, feet, and clothing away from rotating parts.
Rotating parts can contact or entangle hands, feet, hair,
clothing, or accessories.
Failure to observe these safety instructions will result in
traumatic amputation or severe laceration.
Moving Parts
OPERATOR SAFETY
13
Not for
Reproduction
Not for
Reproduction
When performing any maintenance or repairs on the snowthrower, shut OFF
the engine, disconnect spark plug wire, and keep the wire away from the
plug to prevent someone from accidently starting the engine.
Check shear bolts and other hardware at frequent intervals for proper
tightness to be sure the snowthrower is in safe working condition.
Keep nuts and bolts tight and keep snowthrower in good condition.
Never tamper with safety devices. Check their proper operation regularly and
make necessary repairs if they are not functioning properly.
Components are subject to wear, damage, and deterioration. Frequently
check components and replace with recommended parts, when necessary.
Check control operation frequently. Adjust and service as required.
Use only factory authorized replacement parts when making repairs.
Always comply with factory specifications on all settings and adjustments.
Only authorized service locations should be utilized for major service and
repair requirements.
Use only attachments and accessories approved by the factory (such as
wheel weights, counterweights, or cabs).
Never attempt to make any adjustments while the engine is running (except
when specifically recommended by the factory).
Do not allow grease or oil to contact the rubber friction wheel or the disc
drive plate. If the disc drive plate or friction wheel come in contact with
grease or oil, damage to the rubber friction wheel will result.
WARNING
This snowthrower must be properly maintained to ensure safe
operation and performance. Failure to observe the safety
instructions in this manual could result in death or serious
injury.
Maintenance and Storage
-
If there is natural or LP gas leakage in area, do not start engine.
Do not use pressurized starting fluids because vapors are flammable.
WARNING
Starting engine creates sparking.
Sparking can ignite nearby flammable gases.
Explosion and fire could result.
Never touch a hot engine or muffler. Allow muffler, engine cylinder, and fins
to cool before touching.
Remove debris from muffler area and cylinder area.
Install and maintain in working order a spark arrester before using equipment
on forest-covered, grass-covered, or brush-covered unimproved land.
U.S.A. Models: It is a violation of California Public Resource Code
Section 4442 to use or operate the engine on or near any forest-covered,
brush-covered, or grass-covered land unless the exhaust system is equipped
with a spark arrester meeting any applicable local or state laws. Other states
or federal areas may have similar laws.
WARNING
Running the engine produces heat. Engine parts, especially
muffler, become extremely hot.
Failure to observe these safety instructions could result in
severe thermal burns on contact.
Engine Safety (Continued)
OPERATOR SAFETY
14 www.snapper.com
DANGER: READ OPERATOR’S
MANUAL.
Read the Operator’s Manual for
operating and safety instructions.
DANGER: THROWN OBJECTS
HAZARD.
Never direct discharge chute
towards persons or property. Keep
bystanders away.
DANGER: REMOVE KEY BEFORE
SERVICING.
Shut off engine and remove key
before performing maintenance or
repair work.
DANGER: AMPUTATION HAZARD.
Contact with auger will cause
serious injury. Keep hands, feet, and
clothing away. Keep bystanders
away.
DANGER: AMPUTATION HAZARD.
Contact with moving parts inside
chute will cause serious injury. Shut
off engine before unclogging
discharge chute. Use clean-out tool,
not hands!
SAFETY ICONS
Not for
Reproduction
Not for
Reproduction
15
Safety Decals Figure 1
Look for this symbol to indicate important safety
precautions. This symbol indicates: “Attention!
Become Alert! Your Safety Is At Risk.”
Part No. 1727207
Chute Control Icons
Part No. 1733772
Shift Decal
Part No. 1737867
Auger Control Icons
Product ID Number &
Serial Number Decal
(Rear of Motor Box)
WARNING: If any safety decals become worn or
damaged and cannot be read, order replacement decals
from your local dealer.
Part No. 276925
Engine Warning Icons
Part No. 1737869
Auger Control Decal
Part No. 1737870
Traction Control Decal
OPERATOR SAFETY
Before operating your snowthrower, read the safety decals as
shown on your snowthrower. The cautions and warnings are
for your safety. To avoid a personal injury or damage to your
snowthrower, understand and follow all the safety decals.
Part No. 1737876
Main Dash Decal
12
Not for
Reproduction
Not for
Reproduction
16
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
1 – Knife
2 1/2" Wrenches (or adjustable wrenches)
1 7/16” Wrenches (or adjustable wrenches)
1 Wrench (or adjustable wrench)
1 Pair pliers or screw driver (to spread cotter pin)
1 Hammer
1 Pry Bar
CHECK CABLE CONNECTION AND ADJUSTMENT
The traction control cable (A, Figure 6) and auger control cable (B) are
adjusted at the factory and no adjustment should be necessary.
If the cables become stretched, unattached or begin to sag, adjustment
will be necessary. See MAINTENANCE section of this manual.
INSTALL THE SPEED CONTROL ROD
Attach the ball joint (A, Figure 5), located on the bottom end of the speed
control rod (B), to the shift yoke assembly (C) with 5/16" lock washer (D)
and 5/16" nut (E).
INSTALL THE DISCHARGE CHUTE
NOTE: The chute ring assembly (A, Figure 7) comes installed
on the unit from the factory.
1. Install discharge chute assembly (B) using four screws (C) and
nuts (D).
NOTE: Make sure the slot in the chute ring aligns with the
arrow on the outer ring as shown.
2. Tighten screws (C) snugly but be careful not to over-tighten.
WARNING: Always wear safety glasses or eye shields
when assembling the snow thrower.
UNPACK THE SNOWTHROWER
1. Using knife, cut along the dotted lines around the top of the carton.
Then remove top of carton as shown in Figure 2.
2. Using knife, cut along the dotted lines around the bottom of the
carton.
3. Push snowthrower off the bottom of the carton to proceed with
assembly.
PARTS BAG CONTENTS
2 Tie, Self-Locking
NOTE: “Right” and “Left” are from the Operating Position.
ASSEMBLE THE HANDLES
1. Raise the upper handle (A, Figure 3) to the operating position.
2. Guide speed control rod over wheel.
3. Remove blue shipping tape from cables and cut orange zip ties that
secure control cables to handle assembly and chute rotation parts.
NOTE: Make sure the “Z bend ends of the control lever cables
are secured in the holes on the control levers (A, Figure 4).
Be careful not to cut or damage the control cables. Make sure
the cables are not caught between the upper and lower
handle.
4. Slide two carriage bolts (B, Figure 3) into lower holes and fasten with
two 5/16" lock nuts (C). Tighten all four carriage bolts and nuts with a
1/2" wrench or deep socket.
www.snapper.com
INSTALL THE CHUTE ROTATION CRANK
1. Insert chute rotation crank (C, Figure 6) through control panel.
2. Attach the lower end of the chute rotation crank to the universal joint
(D) with hair pin (E).
Not for
Reproduction
Not for
Reproduction
CHECK THE TIRES
Check tires for damage. Check the air pressure in the tires with an
accurate gauge. See the sidewall of the tire for the proper inflation.
CAUTION: Avoid Injury! Explosive separation of tire
and rim parts is possible when they are serviced
incorrectly.
• Do not attempt to mount a tire without the proper
equipment and experience to perform the job.
• Do not inflate the tires above the recommended
pressure.
• Do not weld or heat a wheel and tire assembly. Heat can
cause an increase in air pressure resulting in an
explosion. Welding can structurally weaken or deform
the wheel.
• Do not stand in front or over the tire assembly when
inflating. Use appropriate tool that allows you to stand
to one side.
NOTICE: Check side of tire for maximum tire pressure. DO
NOT exceed maximum.
INSTALL THE DRIFT CUTTERS
Drift cutters are used to cut a path through snow deeper than the auger
housing.
1. On each side of the auger housing, insert carriage bolt (A, Figure 8)
through upper hole.
2. Insert lower tab of drift cutter (B) into lower hole.
3. Secure with wing nuts (C).
ASSEMBLY
ADJUST CHUTE ROTATION GEAR
1. Loosen nut (A, Figure 9) on unit with opening of chute (B) facing
forward.
2. Slide chute rotation gear assembly (C) forward unitl gears mesh.
3. Back chute rotation gear out 1/16".
4. Tighten nut and crank several times to ensure there is no binding.
17
Not for
Reproduction
Not for
Reproduction
www.snapper.com18
SNOWTHROWER AND ENGINE CONTROLS
E. Free-HandTM Control — After engaging the traction control (left hand) and
auger control (right hand), allows the operator to release the auger control
lever to use the other controls.
F. Traction Control Lever — Used to propel snowthrower forward or reverse.
Push down to engage, release to disengage.
G. Skid Shoe — Used to adjust the ground clearance of the auger housing.
H. Clean-Out Tool — Used to remove snow and debris from the discharge
chute and the auger housing.
I. Headlight — Used to operate the snowthrower in poor lighting conditions.
Snowthrower Controls Figure 10
A
C
F
12
G
H
E
D
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to use one of six (6) forward
and two (2) reverse speeds (see Figure 10). To shift, move speed select lever
to desired position.
NOTICE: Do not move speed select lever while Traction Control is
engaged. This may result in severe damage to the drive system.
B. Auger Control Lever — Used to engage and disengage the auger and im-
peller. To engage push down, to disengage release.
C. Chute Rotation Crank — Used to rotate the discharge chute to the left or
right.
D. Deflector Control Wing Nut — Used to control the angle of the chute
deflector (up or down).
I
B
FEATURES AND CONTROLS
Not for
Reproduction
Not for
Reproduction
FEATURES AND CONTROLS
ENGINE CONTROLS
A. Choke Control Knob — Used to start a cold engine (see
Figure 11).
B. Electric Start Button Used to start the engine using the electric
starter.
C. Primer Button — Used to inject fuel directly into the carburetor
manifold to ensure fast starts in cool weather.
D. Safety Key — Must be inserted to start engine. Pull out to stop. Do
not turn safety key.
E. Starter Cord Handle — Used to start the engine manually.
F. ON/OFF Switch — Used to start and stop the engine.
G. Fuel Tank and Cap — Fill the fuel tank to approximately 1-1/2 in.
(38 mm) below the top of the neck to allow for fuel expansion.
H. Oil Fill Cap (Extended Dipstick)
Engine Controls Figure 11
C
H
A
F
E
B
G
STOP
D
19
Not for
Reproduction
Not for
Reproduction
20 www.snapper.com
OPERATION
BEFORE OPERATING SNOWTHROWER
Check the fasteners. Make sure all fasteners are tight.
Read this OPERATOR’S MANUAL and OPERATOR SAFETY before
operating your snowthrower. Compare the illustrations with your
SNOWTHROWER to familiarize yourself with the location of
various controls and adjustments. Save this manual for future
reference.
NOTE: This snowthrower was shipped WITH OIL in the engine.
See “Before Starting Engine” instructions in the OPERATION
section of this manual before starting engine.
WARNING: The operation of any snowthrower can result in foreign objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses or eye shields before beginning snow thrower operation. We
recommend standard safety glasses or Wide Vision Safety Mask over spectacles.
STOP THE SNOWTHROWER
1. Release the auger control lever (B, Figure 12).
2. Release the traction control lever (C).
3. Push the ON/OFF switch (A, Figure 20) to the OFF position and pull
out the safety key (B).
WARNING: Never run engine indoors or in an enclosed,
poor ventilated area. Engine exhaust contains CARBON
MONOXIDE, an ODORLESS and DEADLY GAS.
Keep hands, feet, hair, and loose clothing away
from any moving parts on engine and snow
thrower.
Temperature of muffler and nearby areas can
exceed 150°F (66°C). Avoid these areas.
DO NOT allow children or young teenagers to
operate or be near snow thrower while it is
operating.
OPERATE THE SNOWTHROWER
CAUTION: Operation with a Snow Cab. Wind may blow
exhaust gasses back towards the operator. If you notice
the smell of exhaust, change direction of operation.
7. Use the speed select lever (D) to select the forward drive speed. Set
the speed select lever to one of the following positions as determined
by snow conditions:
1-2 Wet, Heavy, Slushy, Extra Deep
3 Moderate
4-5 Very Light
6 Transport
NOTE: When clearing wet, heavy, snow, it is recommended
that the ground speed of the unit be reduced, maintained full
throttle and do not attempt to clear the full width of the unit.
8. To stop moving forward, release the traction control lever (C).
9. To move the snowthrower backwards, move the speed select lever into
either first or second reverse position and engage the traction control
lever.
NOTE: Always release the traction control lever before moving
the speed select lever.
4. Fully press and hold the auger control lever (B, Figure 12) to engage
the auger rotation. Releasing the auger control lever will disengage
the auger - unless the Free-Hand™ control is activated.
5. Fully press and hold the traction/Free-Hand™ control lever (C) to
engage the traction drive and begin moving the snowthrower. To
disengage the traction drive, completely release the lever.
6. When BOTH levers are pressed, the Free-Hand™ control is activated.
This allows you to release the auger control lever to use the other
controls. The auger will continue to rotate until the traction/Free-
Hand™ control lever is released.
CAUTION: Before operating, make sure the area in
front of the snowthrower is clear of bystanders or
obstacles.
NOTICE: Do not throw snow toward a building as hidden
objects could be thrown with sufficient force to cause damage.
1. Start the engine. See “To Start Engine” in this section.
2. Rotate the chute rotation crank (A, Figure 12) to set the direction (left
or right) of the discharge chute.
3. Loosen the wing nut (D, Figure 10) on the side of the discharge chute
to set the angle (up or down) the snow is thrown. Raise the discharge
chute for more distance, or lower for less distance. After desired angle
is obtained, tighten wing nut.
Not for
Reproduction
Not for
Reproduction
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164

Simplicity SNAPPER DUAL STAGE SNOWTHROWER, 9.0TP 24" Användarmanual

Kategori
Snöslungor
Typ
Användarmanual