Yamaha CRW3200SX Användarmanual
- Kategori
- Optiska skivenheter
- Typ
- Användarmanual
Denna manual är också lämplig för
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party: Yamaha Electronics Corporation, USA.
Address: 6660 Orangethorpe Avenue
Buena Park, CA 90620
Telephone: 714-522-9105
Fax: 714-670-0108
Type of Equipment: CD Recordable/Rewritable Drive
Model Name: CRW3200SX
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that
may cause undesired operation.
See user manual instructions if interference to radio reception is suspected.
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product
in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses
radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause
interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is found to be the source of interference, which can be determined
by turning the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corporation, USA.
6660 Orangethorpe Avenue, Buena Park, CA 90620 U.S.A.
CAUTION - VISIBLE AND / OR INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
VARNING - SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
VARO ! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA / TAI
NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARNING - SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
VORSICHT ! SICHTBARE UND / ODER UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
ATTENTION - RADIATION VISIBLE ET / OU INVISIBLE LORSQUE L’APPAREIL
EST OUVERT. EVITEZ TOUTE EXPOSITION AU FAISCEAU.
COMPLIES WITH 21 CFR CHAPTER 1, SUBCHAPTER J.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
DANGER - VISIBLE AND / OR INVISIBLE LASER
RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE
TO BEAM.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
Laser Product Class: Class 1
Laser Diode Properties
Wavelength: 780 – 787 nm
Pulse Durations and Max. Output
at the lens of the Laser Pickup Unit
Read Mode: 0.85 mW (Continuous)
Write Mode: Max. 48 mW
(for 212 ns, Min. Cycle 57.9 ns)
ACHTUNG
Halten Sie sich beim Bedienen und Einstellen der
Bedienungselemente sowie bei der Bedienungsabfolge
an die Anleitung, da sonst gefährliche Strahlen austreten
können.
ATTENTION
L’emploi de commandes, de réglages ou un choix de
procédures différents des spécifications de cette
brochure peut entraîner une exposition à d’éventuelles
radiations pouvant être dangereuses.
PRECAUCION
El usar los controles o ajustar o realizar procedimientos
diferentes a los especificados aquí resultará en
peligrosas exposiciones a la radiación.
VARO! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTINA NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARNING! OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR
ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.
BETRAKTA EJ STRÅLEN. STRÅLEN ÄR FARLIG.
Laserprodukt-Klasse: Klasse 1
Eigenschaften der Laserdiode
Wellenlänge: 780 – 787 nm
Impulsdauer und max. Ausgang an der Linse der
Laser-Abtasteinheit
Lesemodus: 0,85 mW (kontinuierlich)
Schreibmodus: Max. 48 mW
(für 212 ns, Zyklusmin. 57,9 ns)
Classe du produit laser: Classe 1
Caractéristiques de la diode laser
Longueur d’onde: 780 – 787 nm
Durée des impulsions et sortie maximum depuis
la lentille du bloc capteur optique
Mode de lecture: 0,85 mW (continue)
Mode de gravure: max. 48 mW
(pour 212 ns, cycle min. 57,9 ns)
Clase de producto láser: Clase 1
Propiedades del diodo láser
Longitud de onda: 780 – 787 nm
Duración del pulso y potencia de salida máxima
en el objetivo de la unidad captora láser
Modo de lectura: 0,85 mW (continua)
Modo de escritura: máx. 48 mW
(para 212 ns, ciclo mínimo 57,9 ns)
i
OWNER’S MANUAL
English
ii
SAFETY PRECAUTIONS
PLEASE READ THE FOLLOWING WARNINGS AND CAUTIONS CAREFULLY TO
PREVENT PERSONAL INJURY AND DAMAGE TO THE DEVICE.
These precautions explain how to use the device properly and safely, thereby preventing
injury to yourself and others. This section has been sub-divided into a WARNING section
and a CAUTION section, according to the likelihood and nature of any potential injuries or
damage inflicted. They relate to your personal safety, and also help you prevent the risk
of damage to the device. Please read these sections carefully prior to proceeding.
WARNING
Always follow these basic precautions to avoid short-circuit, damage, fire, or other
hazards, and to avoid serious injury or fatal accident from electrical shock.
● Do not attempt to open or disassemble the device to avoid the risk of electrical shock,
fire, or malfunction.
● Do not look directly at the laser source to avoid the risk of eye damage or blindness.
● Do not insert fingers or foreign objects into the device to avoid the risk of electrical
shock, fire, malfunction, or personal injury.
● Do not expose the device to high humidity or place liquid containers such as a flower
vase on the device to avoid the risk of electrical shock, fire, or malfunction.
● Do not expose the device to temperature outside the range 5 – 35 °C (41 – 95 °F) to
avoid the risk of fire, deformation of the device panel, or malfunction.
● Do not expose the device to dusty place to avoid the risk of fire or malfunction.
● Always follow the owner’s manual to set up or connect the devices properly to avoid
the risk of electrical shock, fire, malfunction, or personal injury.
● If unusual smells, sounds or smoke come from the device, or if foreign objects such
as liquid get into the device, turn off and unplug the computer immediately to avoid
the risk of electrical shock, fire, or malfunction. Contact the store of purchase or your
nearest Yamaha dealer (listed at the back of this manual).
● Be sure that the computer is electrically grounded to avoid the risk of electrical shock.
● Prior to cleaning the drive, always unplug the computer or do not handle the plug with
wet hands to avoid the risk of electrical shock.
● Use the included AC adapter to avoid the risk of fire or malfunction.
iii
● Clean the AC power plug regularly to avoid the risk of fire due to insulation failure
such as humidity.
● Do not unplug the AC adapter by pulling the cable, and do not place objects on the
cable to avoid the risk of electrical shock, fire, or malfunction.
● Plug in the AC adapter fully to avoid the risk of electrical shock or fire.
● Do not connect many devices to an electrical outlet. Maintain the rated power of the
outlet to avoid the risk of fire due to overheating.
CAUTION
Always follow these basic precautions to avoid physical injury to yourself or others,
and damage to the device or other property.
● Always unplug the computer if it will not be used for a prolonged period or if there is a
possibility of lightning, to avoid the risk of electrical shock, fire, or short-circuit.
● Do not use the device near other electrical appliances such as televisions, radios, or
speakers to avoid the risk of interferences between each other.
● Do not place the device unstably to avoid the risk of malfunction or personal injury by
its falling down.
● Do not place the device with a possibility of excessive vibration to avoid the risk of
damage to written data or malfunction.
● Place the device horizontally to avoid the risk of damage to written data.
● Prior to transporting the device, remove the disc from the disc tray to avoid the risk of
damage to written data.
● Use soft, dry cloths to wipe the device. Do not use benzene, paint thinner, detergents,
or chemically treated wiped cloths, and do not place vinyl, plastic, or rubber objects
on the device to avoid the risk of malfunction or damage to the surface of the device.
● Do not rest your weight on or place heavy objects on the device, and do not apply
excessive force to the buttons, switches, or connectors to avoid the risk of damage to
the device or personal injury.
● Be careful not to short-circuit the AC power plug with metal objects to avoid the risk of
malfunction.
● Do not wrap the power cable around the AC adapter to avoid the risk of breaking the
wire or malfunction.
iv
● Do not listen to audio with headphones at high volume for prolonged period to avoid
auditory disorder.
● Prior to turning on the computer, always minimize the volume to avoid auditory
disorder by a sudden burst of sound at high volume.
● Do not place the device near magnets or anything magnetized such as a display to
avoid the risk of interferences between each other.
● Have the device serviced regularly to avoid internal dust buildup that can cause
malfunction, damage or fire. For service information and service charges, contact the
store of purchase or your nearest Yamaha dealer (listed at the back of this manual).
WARRANTY
YAMAHA AND ITS SUPPLIERS ACCEPT NO LIABILITY FOR ANY PROBLEMS THAT OCCUR AS A
RESULT OF ANY OPERATIONS CARRIED OUT OTHER THAN THOSE STATED IN THE MANUAL
THAT COMES WITH THIS PRODUCT, OR THE LOSS OR THE DAMAGE OF ANY DATA CAUSED AS
A RESULT OF USING THIS PRODUCT.
Precautions for Transportation
Transporting the device unfixed may damage its internal mechanism or circuits.
• Remove the disc from the disc tray of the device.
• Put the device in the original box.
Prior to use, check that the complete accessories are included. (Refer to the original box.)
• ©2001 YAMAHA CORPORATION. All Rights Reserved.
• This document may not, in whole or in part, be copied, photocopied, reproduced, translated,
transmitted, or reduced to any electronic medium of machine readable form without prior consent
in writing from Yamaha.
• Windows is a registered trademark of Microsoft Corporation.
• Apple, Macintosh, and Mac OS are registered trademarks of Apple Computer, Inc.
• SafeBurn™ is a trademark of Yamaha Corporation.
• All other trademarks are the property of their respective companies.
™ and ® marks are not specified in this manual.
v
Table of Contents
Features of the CRW3200SX Drive................................................ 1
Names and Functions of Parts.....................................................2
Front Panel...............................................................................................2
Rear Panel................................................................................................3
Precautions on Use.................................................................. 4
Handling Discs ........................................................................................4
Copyright .................................................................................................4
Disclaimer of Indemnity..........................................................................4
Compatible discs......................................................................................5
System Requirements ..............................................................................6
Preparing the CRW3200SX Drive ................................................. 9
Serial Number..........................................................................................9
1 Set up the CRW3200SX drive.............................................................9
2 Connect the CRW3200SX drive........................................................12
3 Check Recognition of the CRW3200SX Drive.................................16
4 Install CD writing software ...............................................................19
Loading/Ejecting a Disc ...........................................................20
Troubleshooting.....................................................................22
Firmware.............................................................................29
CRW3200SX Drive Specifications................................................30
Technical Notes.....................................................................34
Buffer Underrun Protection Function....................................................34
Writing Methods....................................................................................34
For details about how to install and use the CD writing software, refer to the
documentation that comes with it.
• The information contained in this manual is subject to change without prior notice.
• Reproduction of this manual, either in part or in full, is expressly forbidden.
1
Features of the CRW3200SX Drive
High speed writing/reading
The CRW3200SX drive supports up to 24X-speed writing for CD-R discs, and up to
10X-speed writing/rewriting for CD-RW discs. In addition, the drive supports data
reading and digital audio data extraction at up to 40X speed.
Tip
• The Partial CAV method permits 24X-speed writing for CD-R discs.
• The CLV method and the 4X – 10X Full CAV method permit 10X-speed writing/
rewriting for CD-RW discs.
SafeBurn™ (Enhanced stability writing technology)
The generous 8 MB buffer memory provides sufficient data storage to enable stable
disc writing at high speeds. Even if data transfer from the computer is interrupted,
Buffer Underrun Protection is activated to save CD-R discs from a writing error.
(P. 34)
“Optimum Write Speed Control” adjusts the writing speed to the optimum rate for
every CD-R disc automatically. You can set the maximum writing speed with your
CD writing software.
• Optimum Write Speed Control can be activated when the maximum writing speed is
set at 12X or more.
• The minimum writing speed to be automatically selected is 8X. Manually set the
optimum writing speed if a writing speed supported by a disc is less than 8X.
High fidelity digital audio
The CRW3200SX drive supports extraction of digital audio data at up to 40X speed
using CD writing software, as well as recording digital audio with high fidelity even
at 24X-speed writing.
Audio Master Quality Recording (High quality audio writing mode)
Audio Master Quality Recording enables you to create high quality audio CDs. This
mode is available for CD-R discs with a capacity of 650 MB and 700 MB. (P. 35)
Audio CDs that are created with Audio Master Quality Recording may not be played
back on certain audio recorders and CD-R/RW drives.
CD-MRW (CD Mount Rainier ReWriting)
CD-MRW is a new standard of packet writing. Compared to the ordinary packet
writing, CD-MRW provides many useful functions such as background formatting.
(P. 35)
Note
Note
2
Names and Functions of Parts
➀
Disc tray
Holds the disc. It is opened or closed by
pressing the eject button. (P. 20)
➁
Manual eject hole
Forcibly opens the disc tray when the tray
cannot be opened by pressing the eject
button. (P. 21)
➂
Eject button
Press to open or close the disc tray. (P. 20)
➃
Headphone jack
Connects headphones or external speakers
to the drive; has stereo mini-jack
specifications.
➄
Headphone volume dial
Controls the volume of the headphones.
The volume increases as the dial is turned
to the right.
➅
LED
Indicates the operational status of the
CRW3200SX drive by its colors and
blinking patterns.
Lights or blinks blue
• Lights: Standby (with disc)
• Blinks: Opening/Closing disc tray, or
reading disc information (TOC)
• Blinks rapidly: Playback audio
• Blinks irregularly: Reading data
Lights or blinks purple
• Lights: Standby (no disc) or the disc tray
is open
• Blinks: Accessing for writing or test
writing
• Blinks rapidly: Writing
Blinks orange
• Malfunction
Front Panel
➅
➁
➃➄
➀➂
Names and Functions of Parts
3
➀
LINE OUT jacks (L/R)
Connect audio devices such as external
speakers.
➁
POWER switch (STANDBY/ON)
Turns the power on/off. (P. 12, 15)
➂
DC-IN connector
Connects the included AC adapter. (P. 14)
➃
SCSI connectors
Connect the SCSI cable. (P. 12)
D-sub half-pitch 50-pin pin-type is used.
(P. 13)
➄
Dip switch
Sets the SCSI ID number and the
terminator. (P. 9)
Rear Panel
➃➄
➁➀
➂
4
Precautions on Use
To avoid trouble, such as writing errors, loss of recorded data, and malfunction of
the drive, take the following precautions when handling discs.
• Do not place discs in a hot or damp place or where they will be exposed to direct
sunlight.
• Do not touch the disc surface. Hold the disc by the edge when handling it.
• Remove dust and dirt from the disc surface. Use an air spray to remove dust. The
disc surface may be scratched if strongly wiped with a dry cloth.
• Do not stick labels to the disc surface or write anything on it except where
designated.
• Do not clean discs with chemicals or detergents.
• Do not bend or drop discs.
It is prohibited by law to duplicate copyright material for non-personal use without
the prior consent of the copyright holder. When copying material with your CD-R/
RW drive, take due care not to infringe the copyright.
• Yamaha assumes no liability for the loss of any profits incurred as a result of the
loss or corruption of data written on a CD-R or CD-RW, for any loss or damage
caused by or arising out of extraordinary circumstances (including circumstances
that Yamaha has foreseen or could foresee), nor for any damages incurred or
claimed by a third party.
• After handling important data, make a comparison between the original and the
copied data (to confirm that the data has been copied properly).
• In no event shall Yamaha be liable for any damage to discs due to a Buffer
Underrun Error (P. 34) or for any other reason, or the inability to use distributed
discs with your drive.
• Yamaha assumes no liability for the inability to write/playback discs because of
their format.
Handling Discs
Copyright
Disclaimer of Indemnity
Precautions on Use
5
Discs that can be written on
The CRW3200SX drive can write on the following discs.
For the latest information about discs previously checked for compatibility with the
drive, refer to the following website.
YAMAHA CD-R/RW Drive website
URL: http://www.yamaha.co.jp/english/product/computer/
Compatible discs
CD-R discs
• The CRW3200SX drive can write at 1X, 2X, 4X, 8X, 12X, 16X or 24X speed.
• CD-R discs can be played back on a CD-ROM drive or a CD player.
• 24X-speed writing is enabled with Partial CAV method. (P. 6)
• Check the writing speeds your disc supports prior to writing.
CD-RW discs
• The CRW3200SX drive can write/rewrite at 2X or 4X speed.
• CD-RW discs can be read/played back on a device (e.g. CD-ROM drive) that
supports “CD-RW” discs.
Some discs support only 2X speed.
High Speed CD-RW discs
• The CRW3200SX drive can write/rewrite at 4X, 8X or 10X speed.
• High Speed CD-RW discs can be read/played back on a CD-RW drive that
bears the High Speed CD-RW logo or a device (e.g. CD-ROM drive) that
supports “CD-RW” discs.
• When using the packet writing method (P. 35) for writing/rewriting onto High
Speed CD-RW discs, you can select the 4X – 10X Full CAV method. For more
information refer to the documentation that comes with your CD writing software.
(Your CD writing software must support the Full CAV method, as does the CD
Writing software that comes with the CRW3200SX drive.)
• The Full CAV method is recommended when opening and editing a file on a CD-
RW disc with an application software.
• In order to write, erase, read or play back High Speed CD-RW discs, use a CD-R/
RW drive that bears the High Speed CD-RW logo. When using a CD-ROM drive
to read/play back High Speed CD-RW discs, use a drive that supports CD-RW
discs.
If these discs are used with a CD-R/RW drive not bearing the High Speed CD-RW
logo, the discs may not be recognized, resulting in a computer not operating
properly or other malfunctions occurring.
Refer to the YAMAHA website below prior to attempting to read/play back these
discs on a YAMAHA CD-R/RW drive not bearing the High Speed CD-RW logo.
URL: http://www.yamaha.co.jp/english/product/computer/
Note
Note
Note
6
Partial CAV (Constant Angular Velocity)
The CLV (Constant Linear Velocity) method is generally used to write data on a CD-R
disc. In writing using the CLV method, the disc rotation speed is adjusted to keep the data
writing speed (data transfer rate) constant on all parts of the disc.
In contrast, the CAV (Constant Angular Velocity) method exercises control so as to keep
the disc rotation speed constant. Since the CAV method makes it possible to substantially
increase the maximum data transfer rate without straining of the drive, it is adopted today
for most CD-ROM drives.
CD formats define the constant linear density of written data so that the amount of written
data per disc rotation will increase as the writing point moves from the inner track to the
outer track.
With the CAV method, therefore, data is transferred at a higher rate when it is written on
the outer tracks of the disc. To achieve 24X-speed writing, the CRW3200SX drive
employs the Partial CAV method, which is a combination of the CAV method for inner
tracks and the CLV method for outer tracks.
The Partial CAV method controls the disc rotation speed so that the CRW3200SX drive
starts writing at 18X speed on inner tracks, increasing the speed to 24X as the read/write
head moves outward and holds the speed at 24X on outer tracks.
Tip
The CRW3200SX drive supports 8 cm discs.
Use only circular discs. Do not use any irregular shaped discs such as heart-shaped or
star-shaped discs to avoid the risk of malfunction.
The CRW3200SX drive is designed to operate in the following computer
environment. If your computer does not meet these requirements, the CRW3200SX
drive may not operate or write at the maximum speed.
For Windows
Computer (PC/AT compatible)
• CPU: Pentium II-class or higher, 300 MHz or faster
• RAM: 32 MB (64 MB or more is recommended)
64 MB or more is required (128 MB is recommended) for Windows 2000
Professional, while 128 MB or more is required (256 MB is recommended) for
Windows XP.
Note
System Requirements
Continued on next page
Precautions on Use
7
• Hard drive space
Writing data on a CD-R/RW disc requires 50 MB to 100 MB of free space as a
working area on the hard drive. When writing data on a CD-R/RW disc after
creating an image file, there must be enough free space on the hard drive to store
the image file in addition to the working area (a total of up to 900 MB).
However, hard drive space for image files is not required when directly writing
onto a CD-R/RW disc from a hard drive or CD-ROM using the CRW3200SX
drive (on-the-fly writing).
Image file
You can collect the data files to be written on a CD-R/RW disc into a single image file.
The image file is useful for writing the same data onto multiple discs. For details, refer
to the documentation that comes with the CD writing software.
• A spare PCI expansion slot for a SCSI card (if one hasn’t been installed or built-
in)
• SCSI card
SCSI is a standard to connect a computer and peripheral devices.
An optional SCSI card is required to connect the CRW3200SX drive for the
computer without a SCSI connector.
Adaptec’s AHA-2940 series SCSI cards (for PCI slot) are recommended.
For the latest information about SCSI cards supporting the CRW3200SX drive,
refer to the following websites.
YAMAHA CD-R/RW Drive Website
URL: http://www.yamaha.co.jp/english/product/computer/
Operating system
Windows 95 (OSR2 or later), Windows 98, Windows 98 Second Edition,
Windows Me, Windows 2000 Professional, Windows XP
CD writing software
The CRW3200SX drive requires CD writing software to write onto a CD-R/RW
disc. Use the CD writing software that supports the CRW 3200SX drive.
For details about installing and using the CD writing software, refer to the
documentation that comes with the CD writing software.
8
For Macintosh
Computer (Macintosh)
• CPU: PowerPC G3, 300 MHz or faster
• RAM: 32 MB (64 MB or more is recommended)
•CD-ROM drive
The CRW3200SX drive cannot be used to boot the computer or to set up an operating
system.
• Hard drive space
Writing data on a CD-R/RW disc requires 50 MB to 100 MB of free space as a
working area on the hard drive. When writing data on a CD-R/RW disc after
creating image file, there must be enough free space on the hard drive to store the
image file in addition to the working area (a total of up to 900 MB).
However, hard drive space for image file is not required when directly writing
onto a CD-R/RW disc from hard drive or CD-ROM using the CRW3200SX drive
(on-the-fly writing).
Image file
You can collect the data files to be written on a CD-R/RW disc into a single image file.
The image file is useful for writing the same data onto multiple discs. For details, refer
to the documentation that comes with the CD writing software.
• A spare PCI expansion slot for a SCSI card (if one hasn’t been installed or built-in)
• SCSI card
SCSI is a standard to connect a computer and peripheral devices.
An optional SCSI card is required to connect the CRW3200SX drive for the
computer without a SCSI connector.
Adaptec’s PowerDomain 2930 SCSI cards (for PCI slot) are recommended.
For the latest information about SCSI cards supporting the CRW3200SX drive,
refer to the following websites.
YAMAHA CD-R/RW Drive Website
URL: http://www.yamaha.co.jp/english/product/computer/
Operating system
Mac OS 8.1, 8.5, 8.6 and 9 to 9.2 (Classic API with Mac OS X is not supported.)
CD writing software
The CRW3200SX drive requires CD writing software to write onto a CD-R/RW
disc. Use the CD writing software that supports the CRW3200SX drive.
For details about installing and using the CD writing software, refer to the
documentation that comes with the CD writing software.
Note
9
Preparing the CRW3200SX Drive
The serial number is printed on the label on the bottom of your CRW3200SX drive.
When you have a question about the drive or need user support services, the serial
number is required.
Please write the serial number down in the space below. It may be difficult to check
the serial number after setting up the drive or for any other reason.
Prior to connecting the CRW3200SX drive to the computer, set up the following
using the dip switch on the rear panel of the drive.
➀ SCSI ID Number
➁ Termination
Serial Number
Serial Number
1 Set up the CRW3200SX drive
Serial number
(10 characters: 3 letters +
7 numbers)
ID SELECT
TERMINATOR
124
Rear panel
Dip switch
10
➀
➀➀
➀ SCSI ID Number
Each of the SCSI devices connected to the computer needs to be identified by its
own SCSI ID number from “0” to “7.” The SCSI ID number “7” is normally
reserved for the SCSI card. Therefore, assigning a SCSI ID number from “0” to
“6,” except for the ID numbers in use by other SCSI devices, to the CRW3200SX
drive is recommended.
The dip switch of the CRW3200SX has four switches, and use SW 1, SW 2, and
SW 3 (three switches from the left) to set the SCSI ID number. The switches are
set to ON when pulled down. Each switch set to ON counts each ID SELECT
number, and the sum total of the ID SELECT number determines SCSI ID number
as the SCSI ID table shown below.
∗ The SCSI ID number “7” is normally reserved for the SCSI card.
• In the case that other SCSI device has been already connected to the computer, be
sure that the CRW3200SX drive’s SCSI ID number is different from other devices’.
The CRW3200SX drive’s SCSI ID number is set at “1” by default.
• Set the dip switch completely upward/downward.
SCSI ID
SW 1
(ID SELECT: 1)
SW 2
(ID SELECT: 2)
SW 3
(ID SELECT: 4)
0
1 (default) ON
2ON
3ONON
4ON
5ON ON
6ONON
7
∗
∗∗
∗
ON ON ON
Note
SCSI ID 0 SCSI ID 1
(by default)
SCSI ID 2 SCSI ID 3
SCSI ID 4 SCSI ID 5 SCSI ID 6 SCSI ID 7
∗
∗∗
∗
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Preparing the CRW3200SX Drive
11
➁
➁➁
➁Termination
A terminator prevents the reflection of SCSI signals at the last device of the SCSI
chain. The terminators of the first and last devices of the SCSI chain should be set
to ON. If the CRW3200SX drive is not at the last of the SCSI chain, the
TERMINATOR (SW 4) of the dip switch should be set to OFF.
The TERMINATOR (SW 4) of the dip switch is set at ON by default.
Note
Computer
Extenal SCSI
Device
(unterminated)
CRW3200SX
(terminated)
SCSI card
(terminated)
Termination ON (by default) Termination OFF
Set to ON if the CRW3200SX drive
is the last of the SCSI chain
Set to OFF if the CRW3200SX drive
is not the last of the SCSI chain
OFF
ON
OFF
ON
12
1
Turn off the computer and all peripheral devices.
2
Check that the power switch on the rear panel of the
CRW3200SX drive is turned off (STANDBY).
3
Connect the SCSI cable to either one of the SCSI connectors on
the rear panel of the CRW3200SX drive.
Connect the other end of the SCSI cable to the SCSI card
connector of the computer or the other SCSI device.
2 Connect the CRW3200SX drive
SCSI connector
SCSI card
connector
CRW3200SX
rear panel
SCSI cable
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
Yamaha CRW3200SX Användarmanual
- Kategori
- Optiska skivenheter
- Typ
- Användarmanual
- Denna manual är också lämplig för
på andra språk
- italiano: Yamaha CRW3200SX Manuale utente
- Deutsch: Yamaha CRW3200SX Benutzerhandbuch
- français: Yamaha CRW3200SX Manuel utilisateur
- Türkçe: Yamaha CRW3200SX Kullanım kılavuzu
- English: Yamaha CRW3200SX User manual
- dansk: Yamaha CRW3200SX Brugermanual
- suomi: Yamaha CRW3200SX Ohjekirja
- Nederlands: Yamaha CRW3200SX Handleiding
- română: Yamaha CRW3200SX Manual de utilizare
Relaterade papper
-
Yamaha CRW3200UX Bruksanvisning
-
-
-
-
-
-
-
-
-