AEG F54052VI0 Användarmanual

FAVORIT 54052VI

EN

DISHWASHER USER MANUAL

2

ET NÕUDEPESUMASIN KASUTUSJUHEND 24

HU MOSOGATÓGÉP HASZNÁLATI ÚTMUTATÓ 46

SV

DISKMASKIN BRUKSANVISNING

69

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to keep all your AEG

appliances looking spotless and working perfectly. Along with a wide range of

accessories designed and built to the high quality standards you would expect,

from specialist cookware to cutlery baskets, from bottle holders to delicate

laundry bags…

Visit the webshop at:

www.aeg.com/shop

2

CONTENTS

4 Safety information

7 Product description

8 Control panel

10 Use of the appliance

10 Setting the water softener

12 Use of dishwasher salt

12 Use of detergent and rinse aid

13 Multitab function

14 Loading cutlery and dishes

17 Washing programmes

17 Setting and starting a washing

programme

19 Care and cleaning

20 What to do if…

23 Technical data

23 Environment concerns

The following symbols are used in this user

manual:

Important information concerning your

personal safety and information on how to

avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice.

Contents

3

SAFETY INFORMATION

Before the installation and use, read this manual carefully:

• For your safety and the safety of your property.

• To help the environment.

• For the correct operation of the appliance.

Always keep these instructions with the appliance also if you move or give it to a different

person.

The manufacturer is not responsible if an incorrect installation and use causes damage.

Children and vulnerable persons safety

• Do not let persons, children included, with reduced physical sensory, reduced mental

functions or lack of experience and knowledge to use the appliance. They must have su-

pervision or instruction for the operation of the appliance by a person who is responsible

for their safety.

• Children must get supervision to make sure that they do not play with the appliance.

• Keep all packaging away from children. There is the risk of suffocation or injury.

• Keep all detergents in a safe area. Do not let the children touch the detergents.

• Keep children and pets away from the appliance when the door is open.

General safety

• Do not change the specifications of this appliance. There is the risk of injury and damage

to the appliance.

• Obey the safety instructions from the detergent manufacturer to prevent burns to eyes,

mouth and throat.

• Do not drink the water from the appliance. Particles of detergent can stay in your appli-

ance.

• Do not keep the appliance door open without supervision. This to prevent injury and to

fall on an open door.

• Do not sit or stand on the open door.

Use

• The appliance is only for domestic use. Do not use the appliance for other uses to pre-

vent injury to persons and damage to property.

• Only use the appliance to clean accessories that are applicable for dishwashers.

• Do not put flammable products or items that are wet with flammable products in, near

or on the appliance. Risk of explosion or fire.

• Put the knives and all items with sharp points in the cutlery basket with their points

down. If not, put in a horizontal position in the upper basket or in the knife basket. (Not

all models have the knife basket).

• Use only specified products for dishwashers (detergent, salt, rinse aid).

• Types of salt that are not specified for dishwashers can cause damage to the water soft-

ener.

4 Safety information

• Fill the appliance with salt before you start a washing programme. Remaining salt in the

appliance can cause corrosion or make a hole in the bottom of the appliance.

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher

cleaning agent, liquid detergent). This can cause damage to the appliance.

• Make sure that the spray arms can move freely before you start a washing programme.

• The appliance can release hot steam if you open the door while a washing programme

operates. There is a risk of skin burns.

• Do not remove the dishes from the appliance until the washing programme is comple-

ted.

Care and cleaning

• Before you clean the appliance, deactivate it and disconnect the mains plug from the

mains socket.

• Do not use flammable products or products that can cause corrosion.

• Do not use the appliance without the filters. Make sure that the installation of the filters

is correct. An incorrect installation causes unsatisfactory washing results and damage to

the appliance.

• Do not use spray water or steam to clean the appliance. Risk of electrical shock and

damage to the appliance.

Installation

• Make sure that the appliance is not damaged. Do not install or connect a damaged appli-

ance, contact the supplier.

• Remove all packaging before you install and use the appliance.

• Only a qualified person must do the electrical connection, the plumbing and the installa-

tion of the appliance. This to prevent the risks of structural damage or injury.

• Make sure that the mains plug is disconnected from the mains socket during installation.

• Do not drill into the sides of the appliance to prevent damage to hydraulic components

and electrical components.

• Important!Obey the instructions in the template supplied with the appliance:

– To install the appliance.

– To assemble the door panel.

– To connect to the water supply and drain.

• Make sure that the appliance is installed below and adjacent to safe structures.

Frost precautions

• Do not install the appliance where the temperature is less than 0 °C.

• The manufacturer is not responsible for frost damage.

Water connection

• Use new hoses to connect the appliance to the water supply. Do not use used hoses.

• Do not connect the appliance to new pipes or pipes not used for a long time. Let the

water flow for some minutes, then connect the inlet hose.

Safety information

5

• Make sure not to squash or cause damage to the water hoses when you install the appli-

ance.

• Make sure that the water couplings are tight to prevent a water leakage.

• The first time you use the appliance, make sure that the hoses do not have water leaks.

• The water inlet hose has a safety valve and a double sheath with an inner mains cable.

There is pressure in the water inlet hose only when the water flows. If there is a leak in

the water inlet hose, the safety valve interrupts the flow of water.

– Be careful when you connect the water inlet hose:

– Do not put the water inlet hose or the safety valve in water.

– If the water inlet hose or the safety valve are damaged, immediately disconnect the

mains plug from the mains socket.

– Contact the service centre to replace the water inlet hose with safety valve.

WARNING!

Dangerous voltage.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information on the rating plate agrees with the power sup-

ply.

• Always use a correctly installed shockproof socket.

• Do not use multiple plugs and extension cables. There is a risk of fire.

• Do not replace or change the mains cable. Contact the service centre.

• Make sure not to squash or cause damage to the mains plug and cable behind the appli-

ance.

• Make sure that there is access to the mains plug after the installation.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Service centre

• Only a qualified person can repair or work on the appliance. Contact the service centre.

• Use only original spare parts.

6 Safety information

To discard the appliance

• To prevent the risk of injury or damage:

– Disconnect the mains plug from the mains socket.

– Cut off the mains cable and discard it.

– Remove the door catch. This prevents children or pets to be closed in the appliance.

There is a risk of suffocation.

– Discard the appliance at the local waste disposal centre.

WARNING!

The dishwasher detergents are dangerous and can cause corrosion !

• If an accident occurs with these detergents, contact immediately a physician.

• If the detergent gets into the mouth, contact immediately a physician.

• If the detergent gets into the eyes, contact immediately a physician and clean the eyes

with water.

• Keep dishwasher detergents in a safe area and out of children touch.

• Do not keep the appliance door open when there is detergent in the detergent dispenser.

• Fill the detergent dispenser only before you start a washing programme.

PRODUCT DESCRIPTION

1

Upper basket

2

Water hardness dial

3

Salt container

4

Detergent dispenser

Product description

7

5

Rinse aid dispenser

6

Rating plate

7

Filters

8

Lower spray arm

9

Upper spray arm

CONTROL PANEL

2

5

3

4

1

6

A

B

C

1

On/off button

2

Programme selection buttons

3

Multitab button

4

Delay start button

5

Indicator lights

6

Function buttons

Indicator lights

Salt

1)

It comes on when it is necessary to fill the salt container. Refer to 'Use of dish-

washer salt'.

After you fill the container, the salt indicator light can stay on for some hours.

This does not have an unwanted effect on the operation of the appliance.

Rinse aid

1)

It comes on when it is necessary to fill the rinse aid container. Refer to 'Use of

detergent and rinse aid'.

End-of-pro-

gramme

It comes on when:

• The washing programme is completed.

• You adjust the level of the water softener.

• You activate/deactivate the rinse aid dispenser.

• There is a malfunction of the appliance.

1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a

washing programme operates.

On/off button

Press this button to activate or deactivate the appliance.

8 Control panel

Programme buttons

Press one of these buttons to set a washing programme. The related indicator comes on.

Refer to 'Washing programmes'.

Delay start button

Press this button again and again to delay the start of the washing programme of 3, 6 or 9

hours. The related indicator comes on.

Function buttons

Use the function buttons for these operations:

• To adjust electronically the level of the water softener. Refer to 'Setting the water soft-

ener'.

• To deactivate/activate the rinse aid dispenser when the multitab function is on. Refer to

'What to do if...'.

• To cancel the washing programme in progress or a delay start in progress. Refer to 'Set-

ting and starting a washing programme'.

• To deactivate/activate the audible signals. Refer to 'Audible signals'.

Setting mode

The appliance must be in setting mode for these operations:

• To set and start a washing programme.

• To set and start a delay start.

• To adjust electronically the level of the water softener.

• To activate or deactivate the multitab function.

• To activate or deactivate the rinse aid dispenser (only with the multitab function on).

• To deactivate or activate the acoustic signals.

Activate the appliance. The appliance is in setting mode when:

• All the programme indicators are on.

Activate the appliance. The appliance is not in setting mode when:

• Only one programme indicator is on.

• The delay start indicator is on.

– It is necessary to cancel the programme or the delay start to go back to the setting

mode. Refer to 'Setting and starting a washing programme'.

Acoustic signals

You can hear the acoustic signals in these conditions:

• The washing programme is completed.

• The level of the water softener is adjusted electronically.

• The appliance has a malfunction.

Factory setting: on.

Control panel

9

Deactivating the acoustic signals

1. Activate the appliance. Make sure that the appliance is in setting mode.

2. Press and hold function button (B) and function button (C) at the same time until the

indicators of function buttons (A), (B) and (C) flash.

3. Release function button (B) and function button (C).

4. Press function button (C),

• The indicators of function buttons (A) and (B) go off.

• The indicator of function button (C) continues to flash.

• The end indicator comes on.

5. Press function button (C) again.

• The end indicator goes off. The acoustic signals are deactivated.

6. Deactivate the appliance to confirm.

To activate the acoustic signals again, do steps (1) through (4). Press function button (C),

the end indicator comes on and the acoustic signals are active.

USE OF THE APPLIANCE

1. Be sure that the set level of the water softener agrees with the water hardness in your

area. If not, adjust the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appliance.

5. Set the correct washing programme for the type of load and soil.

6. Fill the detergent dispenser with the correct quantity of detergent.

7. Start the washing programme.

If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function

(refer to 'Multitab function').

SETTING THE WATER SOFTENER

The water softener removes minerals and salts from the water supply. These minerals and

salts can cause damage to the appliance.

Adjust the level of the water softener if this does not agree with the water hardness in your

area.

Contact your local water authority to know the water hardness in your area.

Water hardness

Water hardness ad-

justment

German degrees

(°dH)

French degrees

(TH°)

mmol/l Clarke de-

grees

manually elec-

troni-

cally

51 - 70 91 - 125 9,1 - 12,5 64 - 88

2

1)

10

10 Use of the appliance

Water hardness

Water hardness ad-

justment

German degrees

(°dH)

French degrees

(TH°)

mmol/l Clarke de-

grees

manually elec-

troni-

cally

43 - 50 76 - 90 7,6 - 9,0 53 - 63

2

1)

9

37 - 42 65 - 75 6,5 - 7,5 46 - 52

2

1)

8

29 - 36 51 - 64 5,1 - 6,4 36 - 45

2

1)

7

23 - 28 40 - 50 4,0 - 5,0 28 - 35

2

1)

6

19 - 22 33 - 39 3,3 - 3,9 23 - 27

2

1)

5

1)

15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

< 4 < 7 < 0,7 < 5

1

2)

1

2)

1) Factory position.

2) Do not use salt at this level.

You must adjust the water softener manually and electronically.

Manual adjustment

Turn the water hardness dial to the position 1 or 2

(refer to the table).

Electronic adjustment

1. Activate the appliance. Make sure that the appliance is in setting mode.

2. Press and hold function buttons (B) and (C) at the same time until the indicators of

function buttons (A), (B) and (C) flash.

3. Release function buttons (B) and (C).

4. Press function button (A),

• The indicators of function buttons (B) and (C) go off.

• The indicator of function button (A) continues to flash.

• The acoustic signals sound and the end indicator flashes to show the setting of the

water softener (example: 5 flashes and 5 intermittent acoustic signals / pause / 5

flashes and 5 intermittent acoustic signals = level 5).

Setting the water softener 11

5. Press function button (A) again and again to change the setting. Each time you press

function button (A), the adjustment goes to the next level.

6. Deactivate the appliance to confirm.

If the water softener is set electronically to the level 1, the salt indicator light stays off.

USE OF DISHWASHER SALT

How to fill the salt container

1. Turn the cap counterclockwise and open

the salt container.

2. Fill the salt container with 1 litre of water

(only for the first time you fill with salt).

3. Use the funnel to fill the salt container

with salt.

4. Remove the salt around the opening of

the salt container.

5. Turn the cap clockwise to close the salt

container.

It is correct that water comes out from the

salt container when you fill it with salt.

USE OF DETERGENT AND RINSE AID

8

2

4

5

6

1

7

3

Use of detergent

To help the environment, do not use more than the correct quantity of detergent.

Follow the detergent manufacturer recommendations on the detergent packaging.

12 Use of dishwasher salt

Do these steps to fill the detergent dispenser:

1.

Press the release button

2

to open the lid

8

of the detergent dispenser.

2.

Put the detergent in the dispenser

3

.

3. If the washing programme has a prewash phase, put a small quantity of detergent in

the prewash detergent compartment

1

.

4.

If you use the detergent tablets, put the tablet in the detergent dispenser

3

.

5. Close the detergent dispenser. Press the lid until it locks into position.

Different brands of detergent dissolve in different times. Some detergent tablets do not

have the best cleaning results during short washing programmes. Use long washing pro-

grammes when you use the detergent tablets to fully remove the detergent.

Use of rinse aid

Rinse aid makes it possible to dry the dishes without streaks and stains.

The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.

Do these steps to fill the rinse aid dispenser:

1.

Press the release button

5

to open the lid

7

of the rinse aid dispenser.

2.

Fill the rinse aid dispenser

4

with rinse aid. The mark 'max' shows the maximum level.

3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during

the washing programme.

4. Close the rinse aid dispenser. Press the lid until it locks into position.

Adjust the rinse aid dosage

Factory set: position 4.

You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest

dosage).

Turn the rinse aid selector

6

to increase or decrease the dosage.

MULTITAB FUNCTION

The multitab function is for combi detergent tablets.

These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tab-

lets can contain other agents.

Do a check if these tablets are applicable for the local water hardness. Refer to the instruc-

tions from the manufacturer.

When you set the multitab function, it stays on until you deactivate it.

The multitab function deactivates the flow of rinse aid and salt.

The multitab function deactivates the indicator lights of salt and rinse aid.

The programme duration can increase if you use the multitab function.

Activate the multitab function before the start of a washing programme.

You cannot activate the multitab function when the programme operates.

Multitab function

13

To activate the multitab function:

• Press the multitab button. The multitab indicator light comes on.

To deactivate the multitab function and use separately detergent, salt and rinse aid:

1. Press the multitab button. The multitab indicator light goes off.

2. Fill the salt container and rinse aid dispenser.

3. Adjust the water hardness setting to the highest level.

4. Do a washing programme without dishes.

5. Adjust the water softener to the water hardness in your area.

6. Adjust the rinse aid dosage.

LOADING CUTLERY AND DISHES

Hints and tips

• Do not put in the appliance items that can absorb water (sponges, household cloths).

• Remove the remaining food from the items.

• Make soft the remaining burned food on the items.

• Put hollow items (cups, glasses and pans) with the opening down.

• Make sure that water does not collect in containers or in bowls.

• Make sure that cutlery and dishes do not bond together.

• Make sure that the glasses do not touch other glasses.

• Put small items in the cutlery basket.

• Mix the spoons with other cutlery to prevent them to bond together.

• When you put the items in the baskets, make sure that the water can touch all surfaces.

• Put light items in the upper basket. Make sure that the items do not move.

• Water droplets can collect on plastic items and non-stick pans.

Lower basket

Put the saucepans, lids, plates, salad bowls and

cutlery in the lower basket. Arrange the service

dishes and large lids around the edge of the bas-

ket.

14 Loading cutlery and dishes

The cutlery basket

Put the forks and spoons with the handles down.

Put the knives with the handles up.

Mix the spoons with other cutlery to prevent them

to bond together.

Use the cutlery grid. If the dimensions of the cut-

lery prevent use of the cutlery grid, you can easily

remove it.

Upper basket

The upper basket is for plates (maximum 24 cm in

diameter), saucers, salad bowls, cups, glasses, pots

and lids. Arrange the items to let water touch all

surfaces.

Prevent to put plates in the first three sectors in

the front part of the basket. Make sure the plates

tilt forward.

Loading cutlery and dishes 15

Put the glasses with long stems in the cup racks

with the stems up. For longer items, fold the cup

racks up.

Adjustment of the height of the upper basket

You can put the upper basket in two positions to increase the load flexibility.

CAUTION!

Adjust the height before you load the upper basket.

Maximum height of the dishes in:

the upper basket the lower basket

Higher position 20 cm 31 cm

Lower position 24 cm 27 cm

Do these steps to move the upper basket to the higher position:

1. Move the front runner stops (A) out.

2. Pull the basket out.

3. Put the basket in the upper position.

4. Put back the front runner stops (A) in

their initial position.

CAUTION!

If the basket is in the upper position, do not

put cups on the cup racks.

16 Loading cutlery and dishes

WASHING PROGRAMMES

Programme Type of

soil

Type of soil Type of load Programme description

Heavy soil Crockery, cutlery, pots

and pans

Prewash

Wash 70 °C

1 middle rinse

Last rinse

Dry

Normal soil Crockery, cutlery, pots

and pans

Prewash

Wash 65°C

1 middle rinse

Last rinse

Dry

1)

Normal soil Crockery and cutlery Prewash

Wash 50°C

1 middle rinse

Last rinse

Dry

Use this programme to quickly rinse the

dishes. This prevents the remaining food to

bond on the dishes and bad odours to

come out from the appliance.

Do not use detergent with this pro-

gramme.

1 cold rinse

1) This is the standard programme for test institutes (refer to the supplied leaflet for test information). With this

programme you have the most efficient use of water and energy consumption for crockery and cutlery with

normal soil.

Consumption values

Programme Programme time

(minute)

Energy (kWh) Water (litre)

140-150 1,5-1,7 16-18

90-100 1,4-1,6 18-20

150-160 1,0-1,1 13-15

12 0,1 4

The water pressure and temperature, the variations of the mains supply and the quantity of

dishes can change the consumption values.

SETTING AND STARTING A WASHING PROGRAMME

Starting the washing programme without delay start

1. Activate the appliance. Make sure that the appliance is in setting mode.

Washing programmes

17

2. Set the washing programme.

• The related programme indicator stays on.

• All the other programme indicators go off.

3. Close the appliance door, the washing programme starts automatically.

Starting the washing programme with delay start

1. Activate the appliance. Make sure that the appliance is in setting mode.

2. Set the washing programme.

3. Press again and again the delay start button to set the number of hours.

• The related hour indicator comes on.

• The delay start indicator comes on.

4. Close the appliance door, the countdown starts automatically.

When the countdown is completed, the washing programme starts automatically.

The opening of the appliance door interrupts the countdown. When you close the door, the

countdown continues from the point of interruption.

How to cancel a washing programme or a delay start

If a washing programme or a delay start has not started, you can change the selection.

When a washing programme or a delay start are in progress, it is not possible to change the

selection. It is necessary to cancel the washing programme or the delay start to make a new

selection.

When you cancel the delay start, this automatically cancels the selected washing pro-

gramme. You have to select the washing programme again.

1. Press and hold the function buttons B and C until all the programme lights come on.

2. Make sure that there is detergent in the detergent dispenser before you start a new

washing programme.

Interruption of a washing programme

• Open the appliance door.

– The washing programme stops.

• Close the appliance door.

– The washing programme continues from the point of interruption.

End of the washing programme

When the washing programme is completed, an intermittent acoustic signal sounds.

1. Open the appliance door.

• The end indicator is on.

2. Deactivate the appliance.

For better drying results, keep the door ajar for some minutes.

18 Setting and starting a washing programme

Remove the items from the baskets

• Let the dishes become cold before you remove them from the appliance. Hot dishes can

be easily damaged.

• First remove the items from the lower basket, then from the upper basket.

• There can be water on the sides and on the door of the appliance. Stainless steel be-

comes cool more quickly than the dishes.

CARE AND CLEANING

To remove and clean the filters

Dirty filters decrease the washing results. Make a check at intervals and if necessary, clean

them.

The appliance has three filters:

• Coarse filter (A)

• Microfilter (B)

• Flat filter (C).

1. To unlock the filters (A) and (B), turn the

handle on the microfilter (B) approxi-

mately 1/4 counterclockwise and remove.

2. Hold the coarse filter (A) by the handle

and remove it from the microfilter (B).

A

B

C

A

B

C

Care and cleaning 19

3. Remove the flat filter (C) from the bottom

of the appliance.

4. Fully clean the filters with water.

5. Put the flat filter (C) to its initial position.

Make sure that it assembles correctly in

the two guides (D).

6. Put the coarse filter (A) in the microfilter

(B) and push the filters together.

7. Put the filters (A) and (B) in position. Turn

the handle on the microfilter (B) clockwise

until it locks in position.

To clean the spray arms

Do not remove the spray arms.

If the holes in the spray arms become clogged, remove remaining parts of soil with a thin

pointed object.

To clean the external surfaces

Clean the external surfaces of the appliance and control panel with a moist soft cloth.

Only use neutral detergents.

Do not use abrasive products, abrasive cleaning pads or solvents (acetone).

WHAT TO DO IF…

The start of the appliance does not occur or it stops during operation.

First try to find a solution to the problem (refer to the table). If not, contact the service

centre.

With some malfunctions the indicators flash to show an alarm code.

Alarm code Malfunction

• The programme indicator flashes continuously.

• The end indicator flashes one time intermittently.

The appliance does not fill with water.

• The programme indicator flashes continuously.

• The end indicator flashes two times intermittently.

The appliance does not drain the water.

• The programme indicator flashes continuously.

• The end indicator flashes three times intermittently.

The anti-flood device is on.

WARNING!

Deactivate the appliance before you do the checks.

Malfunction Possible cause Possible solution

The appliance does not fill with

water.

The water tap is blocked or

there is limescale on it.

Clean the water tap.

The water pressure is too low. Contact your local water au-

thority.

D

20 What to do if…

Sidan laddas ...

AEG F54052VI0 Användarmanual

Denna manual är också lämplig för

AEG F54052VI0 Användarmanual

på andra språk

Relaterade papper

Andra dokument