EN
21
USE
1. Press the power switch.
2. Press the button to increase temperature
(+) or the button to reduce temperature
(-) to set the required frying temperature
(80 to 200°C).
3. Press the button for longer time or button
for shorter time to set the 5 to 10 minutes
preheating. After the preheating the
product is ready to use.
4. Press the power switch to start frying.
The preheating is complete when the
time has counted down to 0.
5. Carefully take the frying pan out of the
product and put the food in the basket.
An audio prompt is given when the basket
is correctly inserted.
6. Press the button for mode selection and
select the required cooking programme or
set the required temperature and cooking
time.
7. When the cooking programme has been
selected and the time and temperature
have been set, press the power switch to
start the cooking.
8. An audio prompt is given when the
cooking time is over. Take the pan out of
the product and put it on a heat-resistant
surface.
9. If the food is not ready, replace the pan in
the product and set a few more minutes
of cooking time.
10. If the food is ready, carefully take out the
pan, push the lock button and out the
basket from the pan.
11. Put the food in the basket into a suitable
container.
WARNING!
• Do not exceed the maximum marking or
maximum weight.
• Do not turn the pan upside down to pour
out the food, any residual fat in the
bottom of the pan will run out.
• Never use the pan without the basket.
• The pan is very hot during and after use
– risk of burn injury. Always grip the pan
with the handle.
• Do not put cooking oil or fat in the pan.
The product uses hot air.
• Never put anything over the product,
this will interfere with the ow of air
and result in poor cooking.
• Do not use abrasive detergent or
utensils to wash the product.
• Once a batch of food is cooked, the
product can immediately be used again.
• Add a little oil to make the food crispier.
• Shake the food after half of the cooking
time for more uniform and better cooking.
To shake the food, grip the pan with the
handle and take it out of the product,
shake it and then put it back in the
product. Avoid pressing the lock button for
the basket when shaking the pan.
BEFORE USING FOR THE FIRST TIME
1. Remove all packaging material.
2. Remove any stickers etc. from the product.
3. Wash the pan and basket with hot water
and washing-up liquid.
4. Clean the inside and outside of the
product with a damp cloth.
5. Place the product on a level, stable and
heat resistant surface. Do not place or
use the product near sources of heat, or
ammable materials. Leave enough free
space on all sides of the product to ensure
an adequate circulation of air.
6. Put the basket in the pan. An audio
prompt is given when the basket is
correctly inserted.
7. Put the pan in the product.