Yamaha mLAN8P Bruksanvisning

varumärke: Yamaha

Modell: mLAN8P

Kategori: Musikinstrument

Typ: Bruksanvisning

EnglishDeutschFrançais

Owner’s manual

Bedienungsanleitung

Mode d’emploi

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING: Do not place this product in a position where anyone could

walk on, trip over ,or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! IF you must use

an extension cord, the minimum wire size for a 25' cord (or less ) is 18

AWG. NOTE: The smaller the AWG number ,the larger the current

handling capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the

time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and head-

phones or speaker/s, may be capable of producing sound levels that

could cause permanent hearing loss. DO NOT operate for long periods

of time at a high volume level or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the ears, you should consult

an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory mounting

fixtures that are either supplied with the product or as optional accesso-

ries. Some of these items are designed to be dealer assembled or

installed. Please make sure that benches are stable and any optional

fixtures (where applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your

dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of

battery is approximately five years. When replacement becomes

necessary, contact a qualified service representative to perform the

replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery

being charged.

When installing batteries, do not mix batteries with new, or with batter-

ies of a different type. Batteries MUST be installed correctly. Mis-

matches or incorrect installation may result in overheating and battery

case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all

batteries away from children. Dispose of used batteries promptly and

as regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some

reason its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

SPECIAL MESSAGE SECTION

PLEASE KEEP THIS MANUAL

92-BP (bottom)

(3)-6

• When cleaning the instrument, use a soft, dry cloth. Do not

use paint thinners, solvents, cleaning fluids, or chemical-

impregnated wiping cloths. Also, do not place vinyl, plastic or

rubber objects on the instrument, since this might discolor the

panel or keyboard.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons,

switches or connectors.

• Do not operate the instrument for a long period of time at a

high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss

or ringing in the ears, consult a physician.

■

SAVING USER DATA

• Save all data to your computer using the included application

software, in order to help prevent the loss of important data

due to a malfunction or user operating error.

Yamaha cannot be held responsible for damage caused by

improper use or modifications to the instrument, or data that is

losy or destroyed.

Always turn the power off when the instrument is not in use.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,

short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the

internal parts or modify them in any way. The instrument

contains no user-serviceable parts. If it should appear to be

malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in

damp or wet conditions, or place containers on it containing

liquids which might spill into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged,

or if there is a sudden loss of sound during use of the

instrument, or if any unusual smells or smoke should appear

to be caused by it, immediately turn off the power switch,

disconnect the adaptor plug from the outlet, and have the

instrument inspected by qualified Yamaha service personnel.

• Use the specified adaptor (PA-5C or an equivalent

recommended by Yamaha) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Before cleaning the instrument, always remove the electric

plug from the outlet. Never insert or remove an electric plug

with wet hands.

• Check the electric plug periodically and remove any dirt or

dust which may have accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as

heaters or radiators, and do not excessively bend or otherwise

damage the cord, place heavy objects on it, or place it in a

position where anyone could walk on, trip over, or roll anything

over it.

• When removing the electric plug from the instrument or an

outlet, always hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality,

or possibly cause overheating in the outlet.

• Unplug the AC power adaptor when not using the instrument,

or during electrical storms.

• Before connecting the instrument to other electronic

components, turn off the power for all components. Before

turning the power on or off for all components, set all volume

levels to minimum. Also, be sure to set the volumes of all

components at their minimum levels and gradually raise the

volume controls while playing the instrument to set the desired

listening level.

• Do not expose the instrument to excessive dust or vibrations,

or extreme cold or heat (such as in direct sunlight, near a

heater, or in a car during the day) to prevent the possibility of

panel disfiguration or damage to the internal components.

• Do not use the instrument near other electrical products such

as televisions, radios, or speakers, since this might cause

interference which can affect proper operation of the other

products.

• Do not place the instrument in an unstable position where it

might accidentally fall over.

• Before moving the instrument, remove all connected adaptor

and other cables.

English

Introduction

Thank you for purchasing the Yamaha mLAN8P. The mLAN8P is an interface unit that supports

“mLAN,” a digital network for music which employs a high-performance serial bus “IEEE1394.”

The mLAN8P enables you to conﬁgure audio and MIDI signal networks easily now without

repeatedly re-making complicated connections.

You can quickly conﬁgure a system that contains currently-used audio and MIDI devices and

future devices that support “IEEE1394” or “mLAN.” In addition, the mixer function of the

mLAN8P is very useful in music production applications.

Please read this manual to make the best use of mLAN8P’s excellent features, and keep the

manual in a safe place so that you can refer to it any time you have questions.

Package Contents

•

mLAN8P unit

•

PA-5C AC Adaptor*

•

mLAN Tools (CD-ROM)

•

IEEE1394 cable (2.0m)

•

Owner’s manual (this document)

•

mLAN Guide Book

•

mLAN Tools Installation Guide

* May not be included in your area. Please check with your Yamaha dealer.

Included Software

The mLAN8P comes with a CD-ROM containing application software that is helpful for

using the mLAN8P. The CD-ROM includes “mLAN Patchbay,” which is used on a personal

computer to set the routing of audio and MIDI signals that are transmitted between the

devices connected to the mLAN8P. The CD-ROM also includes “mLAN Mixer,” which

enables you to control the mLAN8P mixer and effect functions from a personal computer.

For more information, please refer to the “mLAN Tools Installation Guide.”

English

Table of Contents

Introduction ................................................................................... 4

Package Contents........................................................................... 4

Features .......................................................................................... 6

Names and Functions..................................................................... 8

Connections.................................................................................. 12

Turning the Power On/Off........................................................... 15

Power-On Sequence for Connected Devices................................................15

Internal Configuration of the mLAN8P ....................................... 16

Function Trees .............................................................................. 18

Routing I/O signals between mLAN devices ............................... 20

Mode Functions............................................................................ 24

Settings for the Mixer Input Section: [Mixer 1/2] [1] - [12] ........................24

Settings for the Mixer Output Section: [Mixer 2] - [AUX 1/2].....................27

Settings for the Mixer Output Section: [Mixer 2] - [L] [R] ...........................28

Settings for the MIDI Section .......................................................................29

Utility Section ................................................................................................31

LED/LCD Messages....................................................................... 37

Specifications................................................................................ 38

Index............................................................................................. 39

The illustrations and LCD screens shown in this Owner’s Manual are for instructional purposes

only, and may appear somewhat different from those on your device.

The company names and product names in this Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

English

Features

■

Fast data transfer via mLAN

“mLAN” is a digital network designed for music applications. It uses and extends the industry

standard “IEEE1394” high performance serial bus. You can now conﬁgure more advanced systems

much more easily. Please refer to the separate “mLAN Guide Book” for more information on

mLAN.

■

Converting MIDI and audio signals into the mLAN format

You can connect MIDI or audio devices that do not support mLAN to an mLAN system. The fol-

lowing conversion is possible:

•

mLAN MIDI signal to/from MIDI signal

•

mLAN audio signal to/from analog audio signal

•

mLAN audio signal to/from digital audio signal

•

analog audio signal to/from digital audio signal

■

12-channel mixer function

The mLAN8P provides various functions as a 12-channel digital audio mixer, as well as an interface

unit.

You cannot change the mLAN8P’s settings using the controls on the unit while the mLAN Mixer

is operating.

■

Versatile internal digital effects

The mLAN8P is equipped with a high-quality internal effect processor

essential for music pro-

duction.

■

Internal sampling rate converter

The mLAN8P’s internal sampling rate converter enables data transfer between devices with differ-

ent sampling frequencies

, such as DAT and CD players.

*1.Use the included application software “mLAN Mixer” to set the internal effect proces-

sor parameters. For more information, refer to the mLAN Mixer Owner’s Manual (elec-

tronic ﬁle).

*2.

The mLAN8P supports sampling frequencies of 48kHz and 44.1kHz.

NOTE

English

Features

■

Basic concept of mLAN8P

The diagram shown above illustrates the signal ﬂow through each device connected via the

mLAN8P. You can set the input source and output destination of audio and MIDI signals of the

various devices via the mLAN8P. Speciﬁcally, signals can be input from and output to any mLAN

device via a single IEEE1394 cable. You can also make and change the connections of these

devices in any order without re-patching the cables.

There is a certain restriction regarding the operation of the mLAN8P. You

cannot set up the transmission of MIDI signals between the mLAN devices

using the mLAN8P. You need to set this from the personal computer using

the included “mLAN Patchbay” software.

* Make this serial connection when using the included software on Windows. To use the

included application software on a Macintosh, connect the mLAN8P’s mLAN jack and the

Macintosh’s FireWire port using an IEEE1394 cable. (See “Connecting an mLAN device” on

page 13.)

MIDI device

mLAN device

mLAN8P

digital audio

device

computer*

MIDI signal

analog audio signal

digital audio signal

IEEE1394 jack

MIDI OUT

MIDI IN

ANALOG OUT

MIDI IN

MIDI OUT

ANALOG IN

DIGITAL OUT

DIGITAL IN

DIGITAL OUT

Macintosh

computer

that supports

FireWire

NOTE

English

Names and Functions

Top panel

Front panel

PUSH ON/STANDBY

PHONES VOLUME

INPUT VOLUME

MIDI

/UTILITY

MIXER2

MIXER1

LOCK DATA

RT/ERR

PAG E

–1/EXIT +1/ENTER

OUT-A

OUT-B

DIRECT

WCLK

SYS

METER

AUX1 AUX2

VALUE

1234

9101112

5678

–MIX–

PHONES

English

Names and Functions

LEDs

The LED lights up to indicate the status of

the unit as follows:

[LOCK]

The condition in which the mLAN8P receives

word clock from another device correctly is

called “lock.” The left LOCK LED indicates

the status of signals input at Digital In. The

right LOCK LED indicates the status of mLAN

signals.

green : Lock

off : Unlock (A cable is not connected or

word clock is not received correctly.)

[DATA]

green : Normal status

red : Sound is interrupted due to con-

nection or removal of a device on

the bus, changes to the connec-

tion, out of word clock sync, etc.

[RT/ERR]

green : The mLAN8P is a “root.”

red : An error has occurred.

off : Status other than above.

* This LED is also located on the right end of

the rear panel.

Refer to “LED/LCD Messages” on page

37 for information on the error indication.

LCD (Liquid Crystal Display)

The LCD displays various data and informa-

tion.

INPUT VOLUME

This knob is used to adjust the volume level

of audio signals input from the ANALOG IN

jacks.

ON/STANDBY, PHONE VOLUME

Press this knob to switch the power on and

standby (off). Turn the knob to adjust the

headphone volume level.

Even when the switch is in the “STANDBY”

position, electricity is still ﬂowing to the

instrument at the minimum level. When

you are not using the mLAN8P for a long

time, make sure you unplug the AC power

adaptor from the wall AC outlet.

Mode buttons

These buttons, combined with the channel/

function buttons, are used to select the set-

ting parameters.

Channel/function buttons

These buttons, combined with the mode but-

tons, are used to select the setting parameters.

[MIDI] mode

[IN] [OUT-A] [OUT-B]

: Settings for the connection

destination of the devices con-

nected to the MIDI terminals

[UTILITY] mode

[DIRECT] : Direct out settings

[WCLK] (WORD CLOCK)

: Word clock-related settings

[SYSTEM] (SYSTEM)

: System settings

[MTER] (METER) : Level meter indications

[Mixer 1] mode

[1] - [8] : Settings for the input channels

of the mixer input section

[Mixer 2] mode

[9] [10] : Settings for the input channels

routed from Digital In.

[11] [12] : Settings for the input channels

routed from A/D In.

[AUX1] [AUX2] :Settings for AUX 1/2

[L] [R] : Settings for the output desti-

nation

PAGE button

These buttons are used to navigate back and

forth through the parameters.

+1/ENTER and –1/EXIT buttons

These buttons are used to increment or dec-

rement the parameter value by one. Press

and hold down one of these buttons to

change the value continuously. While the

mLAN8P displays the conﬁrmation dialog for

an edited settings, these buttons are used to

execute (ENTER) or cancel (EXIT) the opera-

tion.

VALUE dial

This dial is used to increase or decrease a

parameter value continuously. It is useful when

you wish to change a value signiﬁcantly.

PHONES jack

Connect a pair of stereo headphones here.

The signals routed to ANALOG OUT 1/L and

2/R are also output here.

NOTE

English

Names and Functions

Rear Panel

CONTRAST

This knob is used to adjust the contrast of

the LCD on the top panel.

ANALOG IN/OUT jacks

These jacks are used to input and output

analog audio signals. They are also called

A/D In and D/A Out respectively, since sig-

nals input at ANALOG IN are digitally pro-

cessed.

MIDI IN/OUT terminals

These terminals are used to connect MIDI

devices and transmit and receive MIDI infor-

mation.

SERIAL I/O jack

This jack is used to connect the mLAN8P

directly to a personal computer via a serial

cable. Use this jack to connect the mLAN8P

and the computer when you are using the

mLAN Patchbay and mLAN Mixer on Win-

dows. This is not used to input or output

MIDI and audio signals. Refer to page 13 for

more information on the connections.

DC IN jack

This jack is used to connect the included

power supply adaptor (PA-5C).

Do not attempt to use an AC adaptor other

than the Yamaha PA-5C or an equivalent

recommended by Yamaha. The use of an

incompatible adaptor may cause irrepara-

ble damage to the mLAN8P, and may even

pose a serious shock hazard! ALWAYS

UNPLUG THE AC ADAPTOR FROM THE

AC POWER OUTLET WHEN THE

mLAN8P IS NOT IN USE.

AB C D

EF G H IJ

CONTRAST ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

DC IN

OUT2/R OUT1/L IN2/R IN1/L

English

Names and Functions

COAXIAL IN/OUT jacks

These jacks are used to input and output dig-

ital audio signals via digital audio pin cables.

Select either the COAXIAL IN jacks

or OPTICAL IN jacks. (page 33.)

These jacks, along with the OPTICAL

IN/OUT jacks

are also called “DIG-

ITAL IN/OUT.”

OPTICAL IN/OUT jacks

These jacks are used to input and output dig-

ital audio signals via optical ﬁber cables.

The OPTICAL connectors are protected

by plastic covers. You must remove the

cover before connecting the cable. Please

remember to replace the cover when you

disconnect the cable.

Select either the COAXIAL IN jacks

or OPTICAL IN jacks. (page 33.)

These jacks, along with the COAXIAL

IN/OUT jacks

are also called “DIG-

ITAL IN/OUT.”

mLAN (IEEE1394) jacks

These jacks are used to connect mLAN

devices or IEEE1394-compatible devices via

IEEE1394 standard (6-pin) cables. Each jack

has an LED in the upper left corner to indi-

cate the following statuses.

green : The mLAN8P or connected device

is a “leaf” node.

off : Not connected.

red : Sound somewhere other than the

connected device is interrupted

when you remove the cable.

RT/ERR LED

This LED indicates the following statuses.

green : The mLAN8P is a “root.”

orange : An error has occurred. (IEEE1394

bus-related)

red : An error has occurred. (Other errors)

off : Status other than above.

* The same LED is located on the top panel.

Refer to “LED/LCD Messages” on

page 37 for information on the error

indication.

ACTIVE LED

This LED indicates the following statuses.

blue : The relay function is active.

off : The relay function is disabled.

Since the mLAN8P does not function

as a bus relay when the power is

turned off, the active LED also indi-

cates whether the power to the unit is

on (blue) or off.

NOTE

English

Connections

This section explains how to connect mLAN and MIDI devices (such as tone generators and key-

boards) to a personal computer via the mLAN8P.

(1) Connecting the power supply adaptor

Connect the plug of the included power supply adaptor (PA-5C) to the DC IN jack on the rear

panel of the mLAN8P, and connect the adaptor part to an AC outlet. Be sure to turn the power

switch off (standby) on the unit before disconnecting the power adaptor cable.

Do not attempt to use an AC adaptor other than the Yamaha PA-5C or an equivalent rec-

ommended by Yamaha. The use of an incompatible adaptor may cause irreparable dam-

age to the mLAN8P, and may even pose a serious shock hazard! ALWAYS UNPLUG

THE AC ADAPTOR FROM THE AC POWER OUTLET WHEN THE mLAN8P IS NOT IN

USE.

(2) Connecting a MIDI device

Use optional MIDI cables to connect the MIDI device’s MIDI IN terminal to the mLAN8P’s MIDI

OUT jack, and the MIDI device’s MIDI OUT jack to the mLAN8P’s MIDI IN terminal. Set the HOST

SELECT switch on the MIDI device to “MIDI.”

To electrical outlet

power supply

adaptor (PA-5C)

CONTRAST ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

DC IN

OUT2/R OUT1/L IN2/R IN1/L

mLAN8P

MIDI cable

Set the HOST SELECT switch

on the rear panel to “MIDI.”

MIDI device

CONTRAST ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

DC IN

OUT2/R OUT1/L IN2/R IN1/L

English

Connections

(3) Connecting an mLAN (IEEE1394) device

Use an IEEE1394 standard (6-pin) cable to connect the mLAN (IEEE1394) jack on the mLAN

(IEEE1394) device to the mLAN (IEEE1394) jack on the mLAN8P. At this time, you do not have to

turn off the power to either device.

(4) Connecting a Windows computer (serial connection)

Use a serial cable to connect the computer’s RS232C jack to the mLAN8P’s SERIAL I/O jack. At this

time, make sure that the power to the computer and the mLAN8P is turned off.

Make this serial connection when using the included software on Windows. To use on a Mac-

intosh, connect the mLAN8P’s mLAN jack and the Macintosh’s FireWire port using an

IEEE1394 cable. (See “Connecting an mLAN device.”)

Use a standard D-SUB 9P

→

MINI DIN 8P cable

mLAN8P mLAN (IEEE1394) device

IEEE1394

standard cable

IEEE1394 standard cable

ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

OUT2/R OUT1/L IN2/R IN1/L

Macintosh computer

that supports FireWire

NOTE

mLAN8P

CONTRAST ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

DC IN

OUT2/R OUT1/L IN2/R IN1/L

computer

RS-232C

(DB9)

English

Connections

(5) Connecting analog audio devices (ampliﬁer, speakers, mixer, etc.)

Connect ANALOG OUT 1/L and 2/R to two channels on the mixer.

(6) Connecting a digital audio device

Use digital audio cables to connect a digital audio device, such as a CD player or MD player, to

the mLAN8P’s digital in/out.

Select COAXIAL IN jacks or OPTICAL IN jacks. (page 33.)

CONTRAST ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

DC IN

OUT2/R OUT1/L IN2/R IN1/L

mLAN8P

OPTICAL

OUTIN

CONTRAST ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

DC IN

OUT2/R OUT1/L IN2/R IN1/L

mLAN8P

OPTICAL OUT OPTICAL IN

digital audio device

OUT

COAXIAL

CONTRAST ANALOG MIDI

OUT-B OUT-A IN

SERIAL I/O

RT/ERR

ACTIVE

mLAN IEEE1394 S200

123

OPTICALCOAXIAL

OUT IN OUT IN

DC IN

OUT2/R OUT1/L IN2/R IN1/L

mLAN8P

COAXIAL OUT

COAXIAL IN

digital audio device

• Using OPTICAL jacks • Using COAXIAL jacks

NOTE

English

Connections

(7) Connecting a pair of headphones

Connect a pair of headphones to the PHONES jacks on the front panel of the mLAN8P to monitor

the signal output at ANALOG OUT 1/L and 2/R (Stereo Mix).

Turning the Power On/Off

When you ﬁnish connecting the mLAN8P and necessary devices, make sure that the volume level

of the mLAN8P and the audio equipment is set to minimum (0), then turn on the power to the

MIDI transmit device, MIDI receive device, and audio equipment (mixer, then ampliﬁer) in this

order. To turn off the power to the devices, ﬁrst lower the level of the audio equipment, then

reverse this order. If the devices are connected via mLAN, you do not have to follow the order of

turning the power on and off.

Power-On Sequence for Connected Devices

PHONES

English

Digital audio

device

Audio

device

mLAN device

(e.g., S80+mLAN8E)

MIDI

device

MIDI

COAXIAL

OPTICAL

(Digital In*

)

mLAN jacks1-3

mLAN8P

mLAN

audio input*

Digital Mixer

section*

mLAN

MIDI

ANALOG

1/L, 2/R

(A/D In)

MIDI/

mLAN MIDI

conversion

mLAN MIDI/

MIDI

conversion

AUX

1/2

Output

Stereo

Mix

Output

Mix L

Mix R

Audio/

mLAN audio

direct conversion

COAXIAL OUT

OPTICAL OUT

(Digital Out)

ANALOG OUT (D/A Out)

non-mLAN signals

mLAN signals

mLAN cables

non-mLAN cables

Input

Output

MIDI OUT-A/B

Output destination selection

Digital/analog (D/A) conversion

Analog/digital

(A/D)

conversion

mLAN audio output

mLAN

MIDI

OUT

MIDI

device

MIDI

device

e.g., MD

e.g., powered

speakers

1/L, 2/R

(=PHONES)

Internal Conﬁguration of the

mLAN8P

English

About the name of mLAN plugs:

Some mLAN plug names start with an asterisk (*). This means that they are directly connected to the

rear panel connectors of the mLAN8P. For example, “*IN (MIDI IN)” plug outputs signals input at the

MIDI IN terminal (on the rear panel of the mLAN8P) to the mLAN bus. This plug is regarded as an

mLAN output plug, but the name includes “*IN” since it outputs signals input at the MIDI IN terminal.

In the same way, “*OUT-A (*MIDI OUT-A)” plug is an mLAN input plug, but the name includes “*OUT-

A” since it inputs signals output at MIDI OUT-A on the rear panel.

mLAN output plugs (Indicated in the

“From” field in mLAN Patchbay.)

mLAN audio

St Mix L (stereo mix L)

St Mix R (Stereo mix R)

AUX1

AUX2

*Dig In L (Digital In L)

*Dig In R (Digital In R)

*A/D In L (ANALOG In L)

*A/D In R (ANALOG In R)

mLAN MIDI

*IN (MIDI IN)

mLAN plugs

mLAN input plugs (Indicated in the

“To” field in mLAN Patchbay.)

mLAN audio

Input1

Input2

Input3

Input4

Input5

Input6

Input7

Input8

mLAN MIDI

*OUT-A (MIDI OUT-A)

*OUT-B (MIDI OUT-B)

Internal Conﬁguration of the mLAN8P

The diagram on the left illustrates the entire signal ﬂow.

You can set the input source and output destination for audio and MIDI signals of the various devices

after they are connected to the mLAN8P. The mLAN8P, especially with its 12-channel digital mixer

function, supports a broad range of applications, serving as the core of a music production studio.

You can set the input source and output destination for various signals and use the mixer function

not only from the mLAN8P of the mLAN8P, but also from a computer by using the included

mLAN Tools.

The mLAN8P mixer section features Direct mode and Mixer mode. When the mLAN Mixer is

not being used, the unit is in Direct mode, in which signals are input and output directly. When

the mLAN Mixer is being used, the unit enters Mixer mode. The default setting (when you turn

on the power to the unit) is Direct mode.

*1 Built-in effect processor. (Use the included application software “mLAN Mixer” to set the effect parame-

ters.) For more information on the effect processor, refer to the Data List in the mLAN Mixer Instruction

Manual (PDF ﬁle). For more information on the structure of the digital mixer section, refer to the Block

Diagram in the mLAN Mixer Owner’s Manual.

*2 Specify which digital jack is used, COAXIAL IN or OPTICAL IN. (page 33.)

*3 For mLAN audio inputs, you can select from any 8 channels on the bus (system).

NOTE

English

Function Trees

■

Mixer input section (mLAN Audio 1-8 Ch)

■

Mixer input section (Digital Audio 9-10 Ch, Analog Audio 11-12 Ch)

■

Mixer output section (mLAN Audio output)

Mode button

Channel

button

Page button to navigate

[+1/ENTER] [–1/EXIT] button and

[VALUE] dial to set

Reference

page

[MIXER 1] [1]-[8] Input Device/Nickname

Selects the input source (mLAN audio

output plug).

Audio In Plug 25

Link

Assigns the same value for each pair

(1&2, 3&4... 11&12).

Gain Adjusts the input level. 25

AUX1 Adjusts the AUX 1 send level. 26

AUX2 Adjusts the AUX 2 send level. 26

Ch (Channel On/Off) Turns the channel function on and off. 26

Pan (Balance)

Sets the stereo position (or balance

when Link switch is ON).

Level Sets the volume level. 26

Mode button

Channel

button

Page button to navigate

[+1/ENTER] [–1/EXIT] button and

[VALUE] dial to set

Reference

page

[MIXER 2] [9]/[10] Optical (Coaxial) Input L/R Only for display purpose 24

Link

Assigns the same value for each pair

(1&2, 3&4... 11&12).

Gain Adjusts the input level. 25

AUX1 Adjusts the AUX 1 send level. 26

AUX2 Adjusts the AUX 2 send level. 26

Ch (Channel On/Off) Turns the channel function on and off. 26

Pan (Balance)

Sets the stereo position (or balance

when Link switch is ON).

Level Sets the volume level. 26

[11]/[12] Analog Input L/R Only for display purpose 24

Link

Assigns the same value for each pair

(1&2, 3&4... 11&12).

Gain Adjusts the input level. 25

AUX1 Adjusts the AUX 1 send level. 26

AUX2 Adjusts the AUX 2 send level. 26

Ch (Channel On/Off) Turns the channel function on and off. 26

Pan (Balance)

Sets the stereo position (or balance

when Link switch is ON).

Level Sets the volume level. 26

[AUX 1 (A1)]

[AUX 2 (A2)]

AUX Out Device/Nickname

Selects the output destination (mLAN

audio input plug).

AUX Out Plug 27

Link Assigns the same value for AUX 1 and 2. 27

Level Sets the volume level. 28

[MIX L]

[MIX R]

Mix Out Device/Nickname

Selects the output destination (mLAN

audio input plug).

Mix Out Plug 28

Balance Sets the Stereo Mix Out balance. 29

Level Sets the volume level. 29

English

Function Trees

■

MIDI section

■

DIRECT OUT

■

Word Clock

■

System section

■

Level meters

Mode button

Channel

button

Page button to navigate

[+1/ENTER] [–1/EXIT] button and

[VALUE] dial to set

Reference

page

[MIDI/

UTILITY]

[IN] MIDI In Device/Nickname Selects the output destination of the

signal input at MIDI IN on the rear

panel (mLAN MIDI input plug).

MIDI In Plug 30

[OUT-A] MIDI Out A Device/

Nickname

Selects the input source of the signal

output from MIDI OUT-A on the rear

panel (mLAN MIDI output plug).

MIDI Out A Plug 30

[OUT-B] MIDI Out B Device/

Nickname

Selects the input source of the signal

output from MIDI OUT-B on the rear

panel (mLAN MIDI output plug).

MIDI Out B Plug 30

[DIRECT] Digital In L Device/

Nickname

Sets the output destination of the

Digital In left channel signal (mLAN

audio input plug).

Digital In Plug 31

Digital In R Device/

Nickname

Sets the output destination of the

Digital In right channel signal (mLAN

audio input plug).

Digital In Plug 31

A/D In L Device/Nickname Sets the output destination of the A/D

In left channel signal (mLAN audio

input plug).

A/D In Plug 31

A/D In R Device/Nickname Sets the output destination of the A/D

In right channel signal (mLAN audio

input plug).

A/D In Plug

[WCLK] Wordclock Source Sets the type of word clock. 32

Group1 Wordclock Master Sets the word clock master. 32

[SYS] Digital Input Source Selects “Optical” or “Coaxial.” 33

Digital Output Source

Selects the signal output from DIGI-

TAL OUT on the rear panel.

Analog Output Source

Selects the signal output from ANA-

LOG OUT on the rear panel.

Set Nickname Edits the nickname. 34

Select Device/Nickname

Selects a device for which the nick-

name is edited.

Set Nickname Sets the nickname. 34

Set Root Sets the mLAN8P as a “root.” 35

Net Trafﬁc

Displays the amount of data trafﬁc on

the network.

Factory Set

Resets the mLAN8P to its factory

default settings.

Conﬁrmation

Selects the requirement for connec-

tion.

[METER]

All Ch

Displays the level meter for all chan-

nels.

Ch1-8, Opti (Coax) L/R, A/

D L/R

Displays the input signal level meter. 36

St Mix L/R, AUX 1/2 Displays the output signal level meter. 36

MIDI IN, OUT-A, OUT-B

Displays whether or not the MIDI sig-

nal is input or output.

English

Routing I/O signals between

mLAN devices

After connecting the mLAN8P to each device via cables, you can easily route and connect I/O sig-

nals between the devices without re-patching the cables. An operation common to both input

and output connections is performed.

The diagram above illustrates an example of routing the output signal from audio channel 3 on a

Yamaha A5000 (B) to audio channel 1 (Input 1) on the mLAN8P. Each device has a nickname,

“Detroit,” “Liverpool,” and “Hamamatsu” from left to right.

Follow the steps below to conﬁgure this connection on the mLAN8P. For more information on

other connections, refer to the notes in the steps.

1. Press [MIXER 1] to enter MIXER 1 mode. The mLAN8P displays the channel parameter in the

mode previously selected.

For any cases other than the example described above, select one of the fol-

lowing modes, according to the desired mLAN input source or output desti-

nation. For more information, refer to the Function Tree table on pages 18

and 19.

mLAN output plugmLAN output plug

mLAN input plugmLAN input plug

IEEE1394

standard cable

IEEE1394

standard cable

YAMAHA mLAN8P

YAMAHA A5000 YAMAHA A5000

audio 1ch

audio 2ch

audio 3ch

audio 4ch

audio 5ch

audio 6ch

audio 7ch

audio 8ch

MIDI

audio 1ch

audio 2ch

audio 3ch

audio 4ch

audio 5ch

audio 6ch

audio 7ch

audio 8ch

MIDI A

MIDI B

audio 1ch

audio 2ch

audio 3ch

audio 4ch

audio 5ch

audio 6ch

audio 7ch

audio 8ch

MIDI

audio 1ch

audio 2ch

audio 3ch

audio 4ch

audio 5ch

audio 6ch

audio 7ch

audio 8ch

MIDI

(A) (B)

Liverpool HamamatsuDetroit

NOTE

Sidan laddas ...

Yamaha mLAN8P Bruksanvisning

varumärke: Yamaha

Modell: mLAN8P

Kategori: Musikinstrument

Typ: Bruksanvisning

Ladda ner pdf

Rapportera

på andra språk

italiano: Yamaha mLAN8P Manuale del proprietario
čeština: Yamaha mLAN8P Návod k obsluze
español: Yamaha mLAN8P El manual del propietario
Deutsch: Yamaha mLAN8P Bedienungsanleitung
polski: Yamaha mLAN8P Instrukcja obsługi
português: Yamaha mLAN8P Manual do proprietário
français: Yamaha mLAN8P Le manuel du propriétaire
Türkçe: Yamaha mLAN8P El kitabı
English: Yamaha mLAN8P Owner's manual
dansk: Yamaha mLAN8P Brugervejledning
русский: Yamaha mLAN8P Инструкция по применению
suomi: Yamaha mLAN8P Omistajan opas
Nederlands: Yamaha mLAN8P de handleiding
română: Yamaha mLAN8P Manualul proprietarului

Yamaha mLAN8P Bruksanvisning

Yamaha mLAN8P Bruksanvisning

på andra språk

Relaterade papper

Andra dokument