ENGLISH
UNITED KINGDOM • www.clasohlson.co.uk
Ver. 20211201
Moon Wall Light Art.no 36-7539 Model K-MWL-RN5W
Please read theentire instruction manual before using theproduct and
then save it for future reference. We reserve theright for any errors in
text or images and any necessary changes made to technical data. In
theevent of technical problems or other queries, please contact our
Customer Services.
Safety
• Thelight bulb in this product must only be replaced by themanufacturer,
aqualified service facility or aqualified technician.
• Theproduct must only be used with thesupplied mains adapter.
4. Set thefunction selector to
thedesired mode:
- ON: Thelight will shine
steadily until you turn it off.
- 20Min: Sleep timer mode,
thelight will gradually dim and
will turn off automatically after
approx. 20 minutes.
Responsible disposal
Theproduct is intended for indoor use only.
Assembly
1. Before drilling and screwing, make sure that thewall is free from
electrical wiring and water pipes.
2. Mark out on thewall where you need
to drill or screw. Use anappropriate
fastening method for thesubstrate
material in question.
3. Screw ascrew
into thewall, but
leave enough
protruding to
hang thelight
on.
5. Connect themains adapter to theDC connection and then to
awall socket.
This symbol indicates that this product should not
be disposed of with general household waste. This
applies throughout theentire EU.
In order to prevent any harm to theenvironment or
health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that
thematerial can be disposed of in aresponsible
manner. When recycling your product, take it to
your local collection facility or contact theplace
of purchase. They will ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Mains adapter
Input 100–240 V AC, 50/60 Hz, 0.15 A
Output 12 V DC, 0.5 A
LED 5 W, 2700 K, >80 Ra
Dimmable No
Lamp fixture brightness 145 lm
Lamp source brightness 380 lm
Dimensions Diam 30 cm
This product contains a light source of energy efficiency class F.
Mains lead
6. Hook thelight onto thescrew
in thewall and then switch it on
using theon/off switch.
7. Turn on the wall light using the
in-line switch.
The power to the light must be disconnected in order to activate
the sleep timer.
Example:
1. To change function, turn off the wall light using the in-line switch.
Select the function ON or 20Min (sleep timer) and then turn on the
light again with the in-line switch. If you selected ON the light will
shine with a fixed glow until you turn it off with the in-line switch.
If you selected 20Min, thelight will shine for 20 minutes and then
gradually dim.
2. If you change the function from ON to 20Min when thelight is
on, the sleep timer will not be activated. Turnoffthe light, set the
function switch to 20Min and turnon thelight. The sleep timer has
been activated.
3. If you have selected sleep timer and the light has dimmed
completely you must disconnect the power with the switch and
then turn on the light again to reactivate the sleep timer.
Care and maintenance
Thelight should be cleaned using adry cloth or vacuum cleaner.
Replaceable (LED only) light
source by a professional.
Replaceable control gear by
an end user.