TCElectronic HALL OF FAME 2 MINI REVERB Snabbstartsguide

Stämpla
TCElectronic
Modell
HALL OF FAME 2 MINI REVERB
Typ
Snabbstartsguide
Quick Start Guide
HALL OF FAME 2 MINI REVERB
Visit musictribe.com to download the full manual
V 1.0
(1)
(5)
(7)
(6)
(8)
(9)
(2)
(3)
(4)
(EN) Controls
(1) DECAY - Adjusts the length of
the reverb.
(2) TONE - Adjusts the brightness
of the reverb.
(3) Output
(4) Footswitch - Tap footswitch to turn
eect on or o. Push down and hold
to engage MASH and control the
selected parameters.
(5) MASH LED - Indicates intensity of
MASH function.
(6) USB - Connect to your computer
for rmware updates and
TonePrint editing.
(7) Power - Connect a 9V / ≥100 mA
power supply.
(8) LEVEL - Adjusts the FX level of
the delay.
(9) Input
(ES) Controles
(1) DECAY - Ajusta la duración de
la reverberación.
(2) TONE - Ajusta el brillo de
la reverberación.
(3) Output
(4) Footswitch - Toque el interruptor de
pie para activar o desactivar el efecto.
Presione y mantenga presionado
para activar MASH y controlar los
parámetros seleccionados.
(5) MASH LED - Indica la intensidad de la
función MASH.
(6) USB - Conéctese a su computadora
para actualizaciones de rmware y
edición de TonePrint.
(7) Power - Conecte una fuente de
alimentación de 9V / ≥100 mA.
(8) LEVEL - Ajusta el nivel de efectos
del retardo.
(9) Input
(FR) Réglages
(1) DECAY - Règle la durée de
la réverbération.
(2) TONE - Règle la luminosité de
la réverbération.
(3) Output
(4) Footswitch - Appuyez sur la pédale
pour activer ou désactiver l’eet.
Appuyez et maintenez enfoncé
pour activer MASH et contrôler les
paramètres sélectionnés
(5) MASH LED - Indique l’intensité de la
fonction MASH.
(6) USB - Connectez-vous à votre
ordinateur pour les mises à jour du
micrologiciel et l’édition TonePrint.
(7) Power - Connectez une alimentation
9V / ≥100 mA.
(8) LEVEL - Règle le niveau d’eet
du retard.
(9) Input
(DE) Bedienelemente
(1) DECAY - Passt die Länge des
Nachhalls an.
(2) TONE - Passt die Helligkeit des
Nachhalls an.
(3) Output
(4) Footswitch - Tippen Sie auf den
Fußschalter, um den Eekt ein- oder
auszuschalten. Gedrückt halten,
um MASH zu aktivieren und die
ausgewählten Parameter zu steuern.
(5) MASH LED - Zeigt die Intensität der
MASH-Funktion an.
(6) USB - Stellen Sie eine Verbindung zu
Ihrem Computer her, um Firmware-
Updates und die Bearbeitung von
TonePrint zu erhalten.
(7) Power - Schließen Sie ein 9V / ≥100
mA Netzteil an.
(8) LEVEL - Passt den FX-Pegel der
Verzögerung an.
(9) Input
(PT) Controles
(1) DECAY - Ajusta a duração
da reverberação.
(2) TONE - Ajusta o brilho do reverb.
(3) Output
(4) Footswitch - Toque no pedal para
ativar ou desativar o efeito. Pressione
e segure para envolver MASH e
controlar os parâmetros selecionados
(5) MASH LED - Indica a intensidade da
função MASH.
(6) USB - Conecte-se ao seu computador
para atualizações de rmware e
edição de TonePrint.
(7) Power - Conecte uma fonte de
alimentação de 9 V / ≥100 mA.
(8) LEVEL - Ajusta o nível de FX do atraso.
(9) Input
(IT) Controlli
(1) DECAY - Regola la lunghezza
del riverbero.
(2) TONE - Regola la luminosità
del riverbero.
(3) Output
(4) Footswitch - Tocca l’interruttore
a pedale per attivare o disattivare
l’eetto. Premere e tenere premuto
per attivare MASH e controllare i
parametri selezionati.
(5) MASH LED - Indica l’intensità della
funzione MASH.
(6) USB - Collegati al tuo computer per
gli aggiornamenti del rmware e la
modica del TonePrint.
(7) Power - Collegare un alimentatore da
9 V / ≥100 mA.
(8) LEVEL - Regola il livello FX del delay.
(9) Input
(NL) Bediening
(1) DECAY - Past de lengte van de
galm aan.
(2) TONE - Regelt de helderheid van
de nagalm.
(3) Output
(4) Footswitch - Tik op de
voetschakelaar om het eect in of
uit te schakelen. Houd ingedrukt
om MASH in te schakelen en de
geselecteerde parameters te regelen.
(5) MASH LED - Geeft de intensiteit van
de MASH-functie aan.
(6) USB - Maak verbinding met uw
computer voor rmware-updates en
TonePrint-bewerking.
(7) Power - Sluit een voeding van
9 V / ≥100 mA aan.
(8) LEVEL - Past het FX-niveau van de
delay aan.
(9) Input
(SE) Kontroller
(1) DECAY - Justerar längden
på efterklangen.
(2) TONE - Justerar efterklangens
ljusstyrka.
(3) Output
(4) Footswitch - Tryck på fotpedalen
för att slå på eller av eekten. Håll
nedtryckt för att aktivera MASH och
kontrollera de valda parametrarna.
(5) MASH LED - Indikerar intensiteten på
MASH-funktionen.
(6) USB - Anslut till din dator för
rmwareuppdateringar och
TonePrint-redigering.
(7) Power - Anslut en 9V / ≥100 mA
strömförsörjning.
(8) LEVEL - Justerar fördröjningens
FX-nivå.
(9) Input
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas NV 89118,
United States
Phone Number: +1 702 800 8290
HALL OF FAME 2 MINI REVERB
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
TC Electronic
HALL OF FAME 2 MINI REVERB
(PL) Sterownica
(1) DECAY - Reguluje długość pogłosu.
(2) TONE - Regulacja jasności pogłosu.
(3) Output
(4) Footswitch - Dotknij przełącznika
nożnego, aby włączyć lub wyłączyć
efekt. Wciśnij i przytrzymaj, aby
włączyć MASH i kontrolować
wybrane parametry.
(5) MASH LED - Wskazuje intensywność
funkcji MASH.
(6) USB - Połącz się z komputerem w
celu aktualizacji oprogramowania
sprzętowego i edycji TonePrint.
(7) Power - Podłącz zasilacz
9V / ≥100 mA.
(8) LEVEL - Regulacja poziomu
FX opóźnienia.
(9) Input
• • Reorient or relocate the receiving antenna.
• • Increase the separation between the equipment and receiver.
• • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• • Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Important information:
Changes or modications to the equipment not expressly approved by Music Tribe can void the user’s
authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive
2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC
and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

TCElectronic HALL OF FAME 2 MINI REVERB Snabbstartsguide

Stämpla
TCElectronic
Modell
HALL OF FAME 2 MINI REVERB
Typ
Snabbstartsguide
Ladda ner PDF
rapportera

på andra språk

Relaterade papper

Andra dokument