Molift 205 Användarmanual

Molift Quick Raiser 205

Contents

User manual - English - 3

Gebrauchsanweisung - Deutsch - 23

Brukermanual - Norsk - 43

Bruksanvisning - Svenska - 63

Käyttöohje - Suomi - 83

Manual utente - Italiano - 103

Manual d`utilisation - Francais - 123

Manual de usuarioo - Español - 143

Handleiding - Nederlands - 163

Brugsvejledning - Dansk - 183

BM13099 Rev. B 2021-06-09

Molift Quick Raiser 205

EN - User manual

BM13001 Rev. E 2021-06-09

User manual - English

Important

This user manual contains important safety

instructions and information regarding the use of

the lifter and accessories.

In this manual the user is the person being lifted.

The assistant is the person operating the lifter.

Warning!

This symbol indicates important

information related to safety.

Follow these instructions carefully.

Read User Manual before use!

It is important to fully understand

the content of the user manual

before attempting to use the

equipment.

Download documentation at www.etac.com to

ensure you have the latest version.

Manufacturer’s Declaration can be found in the

Molift Quick Raiser Technical Manual (TM13001)

English Manual

4

Molift QuickRaiser 205 / www.etac.com

Molift Quick Raiser 205

Molift Quick Raiser 205 is a sit-to-stand mobile

lifter intended for raising and transferring a

person from/to a chair, wheelchair or toilet with

a sling. Molift Quick Raiser 205 is intended for

users who can follow instructions, have good

stability in upper body and can support weight

on at least one leg, but needs assistance when

standing. The shape of the lifter and geometry of

the lifting movement imitates the natural pattern

of movement of a person. The lifter is made of

light-weight materials, has castors, and an electric

motor powered by a battery. The hoist is operated

by using the hand control or the control panel on

the hoist. It has electrically adjustable legs and

with a lifting capacity of 205 kg (451lbs).

It is ideal for institutional care settings but can also

be used in privates homes and nursing homes. The

lifter should only be used for transfers across short

distances, such as between a chair and a bed or

into bathroom / rest room, and is not a replace-

ment for wheelchair or similar.

About Molift Quick Raiser 205

Components:

Lifting arm

Steering

handles

Emergency

stop

Leg support

Legs

Chassis

Trolley

Battery

Lifting

column Hand

control

Wheel / Castor

(Rear with break)

Footplate

Mains cable

Mains cable holder

Assembly tools:

6mm allen key

17mm spanner

5

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

Product label / GS1-128

The barcode label contain EAN number,

serial number and production date.

Warning labels and Symbols

Symbols used on the product, explained in more

detail:

Product identiﬁcation

General

CE declaration

The product, and its related accessories, described in this instruction for use (IFU),

is in compliance with the regulation (EU) 2017/745 of 5. April 2017 – as a medical

device, risk class I.

The product has been tested and approved by a third party according to standards

IEC 60601-1, IEC 60601-1-2 and EN/ISO 10535:2006.

Any serious incident that occurs in relation to the device should be reported to

the manufacturer and the competent authority of the Member State in which the

user and/or patient is established.

Conditions for Use

Lift and transfer of a person will always pose a certain risk and only trained personnel are allowed to use

the equipment and accessories covered by this user manual.

Modiﬁcations and use of components made by other manufacturers.

We recommend only using Etac Molift components and spare parts. Declaration of conformity is not

valid and Etac is not responsible for warranty if any modiﬁcations are made to the product. Etac shall not

be liable for faults or accidents that can occur when using components made by other manufacturers.

Only certiﬁed personnel are allowed to open lifter or accessories to perform service

or repair. Risk of injury from rotating parts and electric shock.

The lifter shall not be operated by the person being lifted.

Warranty notice

Two-year warranty against defects in workmanship and materials of our products.

One-year warranty for batteries.

Please refer to www.etac.com for terms and conditions.

Type BF applied part Charging indicator

CE marked Double isolation symbol

Refer to user manual Manufacturer

Indoor Use only

YYYY-MM-DD

Date of manufacture

Do not dispose in

general waste Catalogue number

Emergency lowering Serial number

Service indicator Medical Device

Battery indicator

6

Molift QuickRaiser 205 / www.etac.com

Safe Working Load (SWL):

205 kg (451 lbs)

Weight of unit:

Total weight of unit: 44,5 kg/98 lbs

Chassis: 17 kg/37,5 lbs

Lifting column: 19 kg/41,9 lbs

Leg support: 3,5 kg/7,7 lbs

4-point lifting arm: 5 kg/11 lbs

Battery:

SLA 24V 2.9 Ah

LiFePO4 25.6V 2.4 Ah

Battery charger:

Input: 100-240 VAC, 50-60 Hz, max 0.35 A

Output: 29.4 VDC, 0,5 A

Battery charge time:

5 hours

Rated performance:

100 hoists at: 75 kg and 500mm

Lifting speed:

35mm/second (1,4 inches/second)

with 75kg (165 lbs) load

Protection class:

IP24 (Complete lifter).

The ocject, probe sphere of 12.5mm Ø shall

not fully penetrate. Water splashing against

the enclosure from any direction shall have

no harmful effect.

Operating forces button:

Buttons on control panel: < 5 N

Buttons on handset: < 5 N

Material:

Aluminum, Plastic, steel

Motor:

Lifting motor: 24 V DC

Leg spreading motor: 24 V DC

Turning diameter:

1144mm / 1300 mm (453/64in) / (513/16in)

Expected Lifetime:

The lifter and accessories has an expected

lifetime of 30 000 cycles or 10 years.

Applied parts:

Sling

Foot rest

Rocker arm handles

Technical Data Quick Raiser 205

922 mm

(36/in)

808 mm

(31/in)

574 mm

(22/in)

530 mm

(20/in)

1068 mm

(42/in)

1320 mm

(51/in)

1730 mm

(68/in)

1140mm

(44/in)

1020 mm

(40/in)

657 mm

(25/in)

710 mm

(27/in)

273 mm

(10/in)

1

2

1

2

Highest position CSP

Lowest position CSP

1160 mm

(45/in)

630 mm

(24/in)

590 mm

(23/in)

220 mm

(8/in)

350 mm

(13/in)

1080 mm

(42/in)

1210 mm

(47/in)

795mm

(31/in)

Ø = 1144 mm

(45/in)

Ø = 1300 mm

(51/in)

922 mm

(36/in)

808 mm

(31/in)

574 mm

(22/in)

530 mm

(20/in)

1068 mm

(42/in)

1320 mm

(51/in)

1730 mm

(68/in)

1140mm

(44/in)

1020 mm

(40/in)

657 mm

(25/in)

710 mm

(27/in)

273 mm

(10/in)

1

2

1

2

Highest position CSP

Lowest position CSP

1160 mm

(45/in)

630 mm

(24/in)

590 mm

(23/in)

220 mm

(8/in)

350 mm

(13/in)

1080 mm

(42/in)

1210 mm

(47/in)

795mm

(31/in)

Ø = 1144 mm

(45/in)

Ø = 1300 mm

(51/in)

Rev.

1740 mm

(68/in)

745 mm

(29/in)

300 mm

(11/in)

675 mm

(26/in)

915 mm

(36/in)

1165 mm

(45/in)

1030 mm

(40/in)

350 mm

(13/in)

220 mm

(8/in)

Measurements, QuickRaiser 205 with ﬁxed legs:

Rev.

1740 mm

(68/in)

745 mm

(29/in)

300 mm

(11/in)

675 mm

(26/in)

915 mm

(36/in)

1165 mm

(45/in)

1030 mm

(40/in)

350 mm

(13/in)

220 mm

(8/in)

Measurements, QuickRaiser 205 with ﬁxed legs:

7

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

Assembly Instructions

Before assembly

Locate assembly tools (5mm allen key, and 17mm

spanner)

1

5

34x 3x

6

4

2

1. Battery

2. Leg Support

3. Column in chassis

4. Lifting Arm

5. Mains cable

6. Hand control

Only trained personell shall assem-

ble the lifter

All screws with pre applied

threadlock should only be used

once. Spare part art.no 2920075

1 - Battery

Push in the emergency stop button before

assembly

Place the column on a horizontal surface.

Make sure the emergency stop is pushed in.

Connect wire from control panel to battery box.

Slide the batterybox in place.

Use the allen key and tighten screw clockwise.

NB! make sure to use the washer.

Make sure the battery is properly

fastened before mounting the

column in the chassis

8

Molift QuickRaiser 205 / www.etac.com

2 - Leg support

Mount the leg support bracket.

3 - Lifting column and chassis

Place the cover on to the lifting column. Twist the

cover sideways to make it stay on column. Insert

the lifting column into the chassis.

Mount the screw with washer on column. Slide

the screw down to chassis, and tighten the screw.

Turn the lifter over on the side. Insert screw and

washer in the top hole and tighten the screw.

Connect cable between column and chassis.

(NB! The cable is NOT applicable with the Molift

Quick Raiser 205 FL version)

The screws will ensure that the column

cannot be pulled upwards. Do not use

lifter unless both screws are securely

fastened.

9

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

4 - Lifting Arm

Place the cover onto the lifting arm. Place lifting

arm in trolley, and insert the bolt.

Insert the bolt and tighten the screw using the

17mm spanner and an 6mm allen key.

Make sure the lifting arm is properly fastened to

the trolley on the column.

Fit the cover onto the trolley

5 - Mains cable

Connect the mains cable to the bottom of the

battery box.

Fit the cover on to the chassis. Remember to put

the tools back in place.

10

Molift QuickRaiser 205 / www.etac.com

6 - Hand control

Connect the hand control to the control panel.

Do not start using lifter before

completing control according to

checklist after assembly.

Checklist after assembly

Use this checklist before use to verify that the lifter

is properly assembled and is safe to opereate.

After assembly, reset emergency

stop by turning it clockwise. Service

light should now be yellow. After

completing this checklist, reset

service indicator as described in the

assembly instructions.

Make sure the leg support and lifting arm are

properly ﬁxed and that there are no loose parts

on the lifter.

Make sure that the lifting column is properly

ﬁxed to the chassis - with both screws

tightened.

Connect lifter to power outlet to make sure

integrated batterycharger works. Charge bat-

tery if necessary.

Check that the lifter has no apparent damage

or other faults.

Perform one lift with load 50-100 kg

NB! Lifter will not operate while charging.

Reset service indicator

If the service LED is yellow, please contact your

Molift service partner

regarding the necessary measures.

Service indicator will start to be yellow again when

12 months has passed and it is time for periodic

inspection.

11

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

How to use Molift Quick Raiser 205

The hand control has 4 buttons for lifting and

lowering of lifting arm and leg spread mechanism

in and out.

The hand control has an indicator

light that will illuminate when battery level is

low and the lifter requires charging

Hand control 4 buttons: Art. no. 2910010

Hand control 2 buttons: Art. no. 2910011

Lifting Arm - Up / Down

NB! The lifter is most unstable in top position.

Legs - In / Out

NB! Spreded legs gives increased stability and

better access to chair or toilet.

Hand control

General Safety Precautions

Only use accessories and slings that are adjusted

to ﬁt the user, type of disability, size, weight and

type of transfer.

Working pause ratio/Duty Cycle.

Molift Quick Raiser 205 should not be run con-

stantly for more than 2 minutes (with maximum

load), and rest for minimum 18 minutes. Duty

Cycle 10%. (Intermittence according to standard

ISO-EN 10535)

Safe Working Load

The lifter is marked with Safe Working Load (SWL)

If maximum load (SWL) differs

between lifter suspension and

body support unit, then the lowest

maximum load shall always be used

Molift lifters shall only be used to

lift persons. Never use the lifter to

lift or move objects of any kind.

Inspection to be performed daily or before use:

Make sure lifter has no visible damage, defects

or deformations

Make sure lifting arm connection, leg sup-

port, battery box and all detachable parts are

properly connected and secured

Test emergency stop button

Check batterylevel and service indicator

Make sure sling strap does not have visible

damage or frays.

Make sure wheels are rolling freely and lifter is

easy to manouvre

Test run lifters operation functions and make

sure lifter does not make any abnormal

sounds

If there are any faults or defects,

the lift needs to be taken out of

operation and marked ”out of

order”

Before use / Daily check

12

Molift QuickRaiser 205 / www.etac.com

Safety devices

Molift Quick Raiser 205 is equipped with several

safety devices, which are intended to prevent

injury to personnel or damage to the equipment in

the case of incorrect use or failure

The lifter has an overload sensor preventing the

lifter to be operated if the load exceeds SWL.

The suspension is hinged to prevent the arm and

suspension from squeezing the user.

Steering handles

Use the steering handles to move the lifter.

Do not push or pull the user,

lifting column or lifting arm.

This may cause stability prob-

lems and lifter may tip over.

The lifter shall only be used for transfer

over short distances. It is not a replacement

for wheelchair or similar.

Brakes

Rear wheels/castors are equipped with kick brakes.

Step on the break to lock brakes. Push up or kick

on top part of the brake to unlock.

Emergency stop / Emergency lowering

Emergency Stop

The emergency stop shuts off the power when

pushed in. Turn clockwise to reset.

Electrical emergency lowering

Use a pen or sharp object to push and hold

button for electrical emergency lowering to lower

suspension. The electrical emergency lowering

function does not work when the emergency stop

is activated.

Only use the electrical emergency

lowering if no other button works.

Manual Emergency lowering

Use the wrench located in the bottom cover to ﬂip

the control panel cover off at the two points.

Push in the emergency stop but-

ton before removing the cover.

Rotating parts represents a squeez-

ing hazard!

Use the 17mm spanner and turn ball screw coun-

ter clockwise until the user is safely lowered. The

manual emergency lowering function should only

be used when the electrical emergency lowering

does not work.

If emergency lowering is used,

mark the lifter “out of order” and

order service!

13

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

Transport and operating conditions

Transport and Storage

For long time storage it is recommended that the

emergency stop button is activated (pushed in).

The lifter can be stored and transported under

temperatures between -25 - 70 °C.

Operating

The lifter is designed for use at standard room

temperatures (+5 to +40°C).

Air Pressure: 70 - 106 kPa

Relative Humidity: 15 - 93 %

Storage or transport at other temperatures leave

the lifter in a room with a suitable temperature

until it reaches a safe operating temperature.

Medical electrical equipment

requires special precautions regard-

ing electromagnetic compatibility

(EMC). Portable or mobile radio

communication equipment may

affect the medical electrical equip-

ment, and should be kept minimum

25 cm (10 inches) from the lifters

electronics.

Battery

Molift Quick Raiser 205 is available with a 24V SLA

battery or a 25.6V LiFePO4 battery - both with an

integrated charger.

The SLA battery has a life expectancy of approx.

500 charge cycles.

The LiFePO4 battery has a life expectancy of

approx. 2000 charge cycles.

Recharge battery upon receipt, and

then every six months, to avoid

battery failure.

Batteries must be disposed of as

special waste according to local

rules and regulations. Do not

dispose in general waste

Battery and Service indicator

Wrench symbol /

Service indicator

Battery symbol /

Battery indicator

The electrical system has a power-save function

which will turn off the electrical system ﬁve

minutes after last operation. All indicators will turn

off.The system is activated when pushing one of

the operating buttons

Battery indicator on control panel

When the multi level battery indicator is yellow

the lifter will have sufﬁcient power available for

one full lifting cycle with max load. When battery

is ﬂashing yellow it is only possible to lower the

lifting arm.

Battery indicator Battery level

Green 80% or more

Green 80 - 60%

Green 60 - 40%

Green 40 - 20%

Yellow or

yellow

blinking

20% or less

(recharge lifter)

Electronics

14

Molift QuickRaiser 205 / www.etac.com

Service indicator

The lifters electronics record the weight lifted and

number of lifts. After a certain period of operation

a signal is given to indicate that service is required.

Service indicator (from 01.01.2018)

Service light Mode

No light No service needed

Green ﬂashing Order service

Yellow Periodic inspection

required

Red Perform service

Service indicator (up until 31.12.2017)

Service light Mode

No light No service needed

Yellow Order service

Yellow ﬂashing Periodic inspection

required

Red Perform service

Charging

LED

The lifter has an integrated charger. Park the

lifter and connect to a wall socket to charge the

battery. A LED-light on the back of the battery box

will be red while charging. The LED-light on the

battery box will show a steady green color when

lifter is fully charged. While charging the LED-lights

on the control panel will ﬂash every 10 seconds.

Do not position lifter in a way

that makes it difﬁcult to discon-

nect mains cable

Do not charge the lifter in a

bathroom or in any room with

wet surfaces!

Remove the main cable from

the wall socket outlet before

moving the lifter

Integrated Battery

Charger

Mains cable

(disconnecting

device)

15

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

Transfer

Plan the lifting operation in advance to ensure that

it is as safe and smooth as possible. Remember

to work ergonomically. Assess the risks and take

notes. The assistant is responsible for the safety of

the user.

Using Slings

It is important that the sling has been tested with

the individual user and for the intended lifting

situation.

Read User Manual for the sling

prior to use.

Do not to use damaged or badly

worn slings.

Slings made by other manufacturers

Only use Molift slings. Etac shall not be liable for

faults or accidents that can occur when using

slings made by other manufacturers.

Adjusting leg support

Move the Quick Raiser 205 in front of the user.

Place the feet on the footplate. If necessary - help

the user to place the feet correctly. Lock the

wheels on the lifter before lifting the user.

The optimal angle of the users joints before

lifting is 90 degrees.

Make sure the height of the leg

support are adjusted to ﬁt the

induvidual users anatomy. The

top of the cushions should be 2

cm under the users knee

Use the turning knob to adjust the leg support

higher or lower if necessary.

Make sure the user is not hanging

forward or swinging to the sides

under and before lifting or lower-

ing the user.

Alternative leg support with straps

The alternative leg support with straps can be

removed and turned 180 degrees to increase sup-

port on both inside or outside of the users legs.

ACB

AAB C

90˚

16

Molift QuickRaiser 205 / www.etac.com

Using a 4-point suspension

Fasten the sling to the lifting arm by guiding the

strap into all 4 hooks.

Pull the loose strap to adjust the length of the

straps. Make sure both sides have equal length.

The patient’s weight ensures that the strap locks

into the lifting arm. The user must lean back

slightly when lifting, and if possible hold onto the

handles.

Removing sling

Loosen the straps again by angling the buckle and

puling the strap out.

Using a 2-point suspension

On the 2-point suspension arm the ropes is

attached to the lifting arm by pulling them ﬁrmly

from above and into the rope locks.

Removing sling

Release the band by sliding your ﬁngers along the

rope away from the patient.

RgoSling Active can only be used

with the 4-point suspension.

RgoSling Stand Up can only be

used with the 2-point suspension.

17

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

Raising/Lowering

When moving the user, stand to the side of the

person you are lifting. Make sure that arms and

legs do not obstruct the seat, bed, etc. Keep eye

contact with the user to help them feel safe.

If possible: Extend the width of the wheel base

prior to lifting using the button for base width

adjustment on the Hand control.

1. Check that the sling is correctly ﬁtted around

the user and that the strap loops are correctly

ﬁtted to the suspension hooks.

2. Make sure user has both feets placed ﬁrmly on

the footplate on the lifter.

3. Stretch the sling straps without lifting the user.

Ensure that both loops of the sling are securely

fastened to avoid the user slipping or falling.

4. Make sure the buckle is properly fastened

5. Lift user to standing postition, and tighten and

adjust the sling if necessary.

Make sure the users hands are

placed correctly to avoid that the

lifting straps are squeezing the

users hands and ﬁngers.

NB! The wheels of the object the user is being

lifted from or into must be in the locked position.

Transfer

Raise the patient carefully until the buttocks are

clear from the seating and tighten the belt. Unlock

the wheels on the lifter and move the patient to

the next location.

Be careful during movement not to run into

furniture, walls, doors etc.

The lifter shall not be used to lift or

move users on sloping surfaces

Avoid deep pile carpets, high thresholds, uneven

surfaces or other obstacles that may block the cas-

tors. The lifter may become unstable if forced over

such obstacles increasing the risk of tipping over.

The lifter shall only be used for movement over

short distances. It is not a replacement for wheel-

chair or similar.

18

Molift QuickRaiser 205 / www.etac.com

Accessories

(Recommended) optional equipment and acces-

sories for Molift Quick Raiser 205.

Accessories

Extension for power cord

Art. no.: 2920117

Set of inlay for footplate

Art. no.: 2920151

Footboard

Art. no.: 2910065

Altenative leg support with straps:

Complete kit with bracket and large

cushions

Art.no.: 2910056

Set of large cushions

Art.no.: 2910077

Complete kit with bracket and small

cushions

Art.no.: 2910059

Set of small cushions

Art.no.: 2910076

Lifting arms and slings

4-point suspension:

Quick Raiser Active lifting arm

Art. no.: 2910060

Rgosling Active

Art. no.: 1720910 Size XS

Art. no.: 1720920 Size S

Art. no.: 1720930 Size M

Art. no.: 1720940 Size L

Art. no.: 1720950 Size XL

2-point suspension:

Quick Raiser Stand Up lifting arm

Art. no.: 2910061

Rgosling Stand Up

Art. no.: 1720710 Size XS

Art. no.: 1720720 Size S

Art. no.: 1720730 Size M

Art. no.: 1720740 Size L

Art. no.: 1720750 Size XL

Rgosling Stand Up Padded

Art. no.: 1720810 Size XS

Art. no.: 1720820 Size S

Art. no.: 1720830 Size M

Art. no.: 1720840 Size L

Art. no.: 1720850 Size XL

19

Molift QuickRaiser 205 / www.etac.com

ENNO DEFR ITES FI SVNLDA

Maintenance

Cleaning and disinfection

Clean on a regular basis. Clean surfaces with

a damp cloth using an appropriate pH-neutral

detergent. Do not use solvents or strong liquids,

this may damage surfaces on the lifter. For

disinfection when needed; use isopropyl alcohol.

Avoid abrasive cleaning products.

• Remove lifting arm cover to clean underneath

• If nessesary, remove the knee cushion and

clean it with running water

• Remove hair and pile from the castors and

verify that the castors rotates freely.

Clean contact and hand control with isopropyl

alcohol to remove grease and dirt if necessary.

Check emergency stop after cleaning.

The lift should not be exposed to running water.

Make sure not to damage or

remove labels when cleaning.

Reconditioning

Follow cleaning and assembly procedure, complete

periodic inspection and use checklist after assem-

bly to recondition the lifter.

Recycling

Refer to “Recycling instructions” for how to prop-

erly dispose of product. See www.etac.com.

Spare Parts

A list of spare parts is available on request.

Periodic Inspection Scope

Periodic inspection is a visual examination (particu-

larly of the lifter’s load bearing structure and lifting

mechanism with attachments, brakes, controls,

safety devices and person-support devices) accord-

ing to Periodic Inspection Report for Molift Quick

Raiser 205.

See www.etac.com.

If there is any problems with the

lifter that could jeopardize some-

ones safety, the lifter shall imme-

diately be taken out of service and

marked “out of order”. Do not use

the lifter untill it is repaired.

Periodic Inspection shall be performed at least

once a year or more frequently if required by local

requirements. The inspection must be performed

by service personnel authorized by Etac. Contact

Etac at molift@etac.com for training and

authorization or recommendation of an approved

service partner.

When performing a periodic inspection, the

inspector shall ﬁll out the inspection report for

Molift Quick Raiser 205. The reports should be

retained by the person(s) responsible for servicing

the lifter. If the inspection reveals defects and

damages, the lifter shall be taken out of operation

and marked “out of order” until it is repaired.

After performing periodic inspection reset the

service indicator, see page 11

Periodic Inspection

20

Molift QuickRaiser 205 / www.etac.com

Sidan laddas ...

Molift 205 Användarmanual

Molift 205 Användarmanual

på andra språk