MILL COMPACT PRO WIFI 5200 VARMEPUMPE Bruksanvisning

Instruction and installation

Series:

Please read the instructions carefully before use.

Take good care of this manual for later use.

Mill Compact Pro

WiFi Heat Pump

MHP5200IN & MHP5200OUT

MHP7400IN & MHP7400OUT

EN DKNO SE FI

Scandinavian

home comfort

Mill is a Norwegian brand that develops heating and indoor air quality products

tailored for your modern home. Inspired by Scandinavian nature, our products are

designed to sustain the toughest of climates to ensure safe, efﬁcient and comforta-

ble temperatures, as well as good air quality.

Mill products are praised for their minimalistic and elegant features as they blend

in naturally with any modern interior. Our advanced and user-friendly technology

will support a relaxing and healthy home space with reliable temperatures and air

quality. Mill’s vision is to develop products that create an enjoyable and harmonic

household atmosphere, enhancing both comfort and style; the ultimate Scandinavi-

an home comfort.

We hope you enjoy your Mill product.

Mill Compact Pro WiFi Heat Pump is an energy efﬁcient and smart heating and cool-

ing solution that you can control with the Mill-app, for everyday comfort and energy

saving. This means you can use the same app to program this heat pump as you

use for your Mill WiFi products, giving you full control of your heating. With this smart

heat pump Mill promises you the ultimate Scandinavian home comfort with its high

heating efﬁciency and comfortable cooling adjusted to your personal needs.

fb.com/millnorway

@millnorway

millnorway.com

mhp@millnorway.com

Follow us on social media:

Introduction

1

EN

Content

2

6

10

11

12

13

24

26

29

33

39

43

45

48

INTRUCTION MANUAL

Safety precautions

Description of terms

Product speciﬁcations

Parts name

Operation and introduction of remote controller

Cleaning and maintenance

Troubleshooting

INSTALLATION MANUAL

Installation notice

Installation of indoor unit

Installation of outdoor unit

Test and operation

Conﬁguration of connection pipe

SPECIALIST MANUAL

2millnorway.com

EN

Important safety information

Exception Clauses

Manufacturer will bear no responsibilities when personal injury or property loss is caused

by the following reasons:

1. Damage the product due to improper use or misuse of the product

2. Change, maintain or use the product with other equipment without abiding by the

instruction manual of manufacturer

3. After veriﬁcation, the defect of product is directly caused by corrosive gas

4. After veriﬁcation, the defects are due to improper operation during transportation of

product

5. Operate, repair, maintain the unit without abiding by instruction manual or related

regulations

6. After veriﬁcation, the problem or dispute is caused by the quality speciﬁcation or

performance of parts and components that produced by other manufacturers

7. The damage is caused by natural calamities, bad using environment or force ma-

jeure.

If you need to install, move or maintain the heat pump, please contact dealer or local

service center to conduct it. The heat pump must be installed, moved or maintained by

appointed unit. Otherwise, it may cause serious damage or personal injury or death. If

refrigerant leaks or requires discharge during installation, maintenance, or disassembly, it

should be handled by certiﬁed professionals or otherwise in compliance with local laws

and regulations. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety. Children should be supervised to ensure that they do

not play with the appliance.

The refrigerant

Appliance ﬁlled with

ﬂammable gas R32.

Before install the appliance,

read the installation manual

ﬁrst.

Before use the appliance,

read owner’s manual ﬁrst.

Before repair the appliance,

read service manual ﬁrst.

The function of the heat pump is based on a special refrigerant circulating in the system.

The used refrigerant is the ﬂuoride R32, which is specially cleaned. The refrigerant is ﬂam-

mable and inodorous. Furthermore, it can lead to explosion under certain conditions. But

the ﬂammability of the refrigerant is very low. It can be ignited only by ﬁre.

Compared to common refrigerants, R32 is a nonpolluting refrigerant with no harm to the

ozone layer. The inﬂuence upon the greenhouse effect is also lower. R32 has got very

good thermodynamic features which lead to a really high energy efﬁciency. The units

therefore need a less ﬁlling.

3

EN

WARNING

Do not use means to accelerate the defrosting process or to clean, other than those

recommended by the manufacture. Should repair be necessary, contact the store

where you purchased the products or an authorized installer. Any repairs carried out

by unqualiﬁed personnel may be dangerous. The appliance shall be installed in a room

without continuously operating ignition sources. (for example: open ﬂames, an operating

gas appliance or an operating electric heater.) Do not pierce or burn. Appliance shall be

installed, operated and stored in a room with a ﬂoor area larger than 4 m². (Please refer

to the wiring board sticker placed on the indoor and outdoor unit). Appliance ﬁlled with

ﬂammable gas R32. For repairs, strictly follow manufacturer’s instructions only. Be aware

that refrigerants may not contain an odour. Read specialist’s manual.

Hereby, Mill International AS, declares that this heat pump is in compliance with the

essential requirement and other relevant provisions of RE Directive 2014/53/EU. A copy

of the full DoC is available upon request. Wireless frequency range: 2412MHz – 2472MHz

Maximum Transmit Power: 18 dBm.

R32: 675 GWP

This marking indicates that this product should not be disposed with other

household wastes. To prevent possible harm to the environment or human

health from uncontrolled waste through please use the return and collection

systems or contact the retailer where the product was purchased.

From uncontrolled waste disposal, recycle it responsibly to promote the sustainable

reuse of material resources. To return your used device, please use the return and col-

lection system or contact the retailer where the product was purchased. They can take

this product for environmentally safe recycling.

4millnorway.com

EN

Safety operation of ﬂammable refrigerant

Qualiﬁcation requirement for installation and maintenance personal

• The installer of this product who are engaging in the refrigeration system should

bear the valid certiﬁcation awarded by the authoritative organization and the qual-

iﬁcation for dealing with the refrigeration system recognized by this industry. If it

needs other technician to maintain and repair the appliance, they should be super-

vised by the person who bears the qualiﬁcation for using the ﬂammable refrigerant.

• It can only be repaired by the method suggested by the equipment’s manufacturer.

Installation notes

• The heat pump must be installed in a room that is larger than the minimum room

area. The minimum room area is 4 m2, also shown on the nameplate attached on

the indoor unit and outdoor unit.

• It is not allowed to drill hole or burn the connection pipe.

• Leak test is a must after installation.

Maintenance notes

• Check whether the maintenance area or the room area meet the requirement of

the nameplate.

·Only allowed to be operated in the rooms that meet the requirement of the

nameplate.

• Check whether the maintenance area is well ventilated.

·The continuous ventilation status should be kept during the operation process.

• Check whether there is ﬁre source or potential ﬁre source in the maintenance area.

·The naked ﬂame is prohibited in the maintenance area; and the “no smoking”

warning board should be hanged.

• Check whether the appliance mark is in good condition.

·Replace the vague or damaged warning mark.

Welding

• If you should cut or weld the refrigerant system pipes in the process of maintaining,

please follow the steps as below:

a) Shut down the unit and cut power supply.

b) Eliminate the refrigerant.

c) Vacuuming

d) Clean it with N2 gas.

e) Cutting or welding

f) Carry back to service spot for welding.

5

EN

• The refrigerant should be recycled into the specialized storage tank.

• Make sure that there isn’t any naked ﬂame near the outlet of the vacuum pump and

it’s well ventilated.

Filling the refrigerant (if needed)

• Use the refrigerant ﬁlling appliances specialized for R32. Make sure that different

kinds of refrigerant won’t contaminate with each other.

• The refrigerant tank should be kept upright at the time of ﬁlling refrigerant.

• Stick the label on the system after ﬁlling is ﬁnished.

• Don’t overﬁlling.

• After ﬁlling is ﬁnished, please do the leakage detection before test running; another

time of leak detection should be done when it’s removed.

Safety instructions for transportation and

storage

• Please use the ﬂammable gas detector to check before unload and open the con-

tainer.

• No ﬁre source and smoking.

• According to the local rules and laws.

6millnorway.com

EN

Safety precautions

Installation

• Installation or maintenance must be performed by qualiﬁed

professionals.

• The appliance shall be installed in accordance with national

wiring regulations.

• According to the local safety regulations, use qualiﬁed pow-

er supply circuit and circuit breaker.

• All wires of indoor unit and outdoor unit should be connect-

ed by a professional.

• Be sure to cut off the power supply before proceeding any

work related to electricity and safety.

• Make sure the power supply matches with the requirement

of heat pump.

• Unstable power supply or incorrect wiring may result in

electric shock, ﬁre hazard or malfunction. Please install

proper power supply cables before using the heat pump.

• The grounding resistance should comply with national elec-

tric safety regulations.

• The heat pump should be properly grounded. Incorrect

grounding may cause electric shock.

• Do not put through the power before ﬁnishing installation.

• Do install the circuit breaker. If not, it may cause malfunc-

tion.

• An all-pole disconnection switch having a contact sepa-

ration of at least 3mm in all poles should be connected in

ﬁxed wiring.

7

EN

• Circuit breaker should be included magnet buckle and

heating buckle function. It can protect the overload and

circuit short.

• Instructions for installation and use of this product are pro-

vided by the manufacturer.

• Select a location which is out of reach for children and far

away from animals or plants. If it is unavoidable, please add

a fence for safety purpose.

• The indoor unit should be installed close to the wall.

• Don't use unqualiﬁed power cord.

• If the length of power connection wire is insufﬁcient, please

contact the supplier for a new one.

• The appliance must be positioned so that the plug is acces-

sible.

• For the heat pump with plug, the plug should be reachable

after ﬁnishing installation.

• For the heat pump without plug, a circuit breaker must be

installed in the line.

• The yellow-green wire in the heat pump is grounding wire,

which can't be used for other purposes.

• The heat pump is an electrical class 1 appliance. It must be

properly grounded with specialized grounding device by a

professional. Please make sure it is always grounded effec-

tively, otherwise it may cause electric shock.

• The temperature of refrigerant circuit will be high, please

keep the interconnection cable away from the copper tube.

8millnorway.com

EN

Operation and Maintenance

READ THE INSTRUCTIONS CAREFULLY

You must obey common safety guidelines when using

electrical products, especially in the presence of chil-

dren.

Children and Vulnerable People Safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concern-

ing use of the appliance in a safe way and understand the

hazards involved.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by chil-

dren without supervision.

• Keep all packaging away from children.

Electrical information

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualiﬁed per-

sons in order to avoid a hazard.

• Do not connect heat pump to multi-purpose socket. Other-

wise, it may cause ﬁre hazard.

• Disconnect power supply when cleaning the heat pump.

Otherwise, it may cause electric shock.

• Do not wash the heat pump with water to avoid electric

shock.

• Do not spray water on indoor unit. It may cause electric

shock or malfunction.

9

EN

• Do not repair the heat pump by yourself. It may cause

electric shock or damage. Please contact dealer when you

need to repair the heat pump.

• After removing the ﬁlter, do not touch ﬁns to avoid injury.

• Do not extend ﬁngers or objects into air inlet or air outlet. It

may cause personal injury or damage.

• Do not spill water on the remote controller, otherwise the

remote controller may be broken.

• Do not use ﬁre or hair dryer to dry the ﬁlter to avoid defor-

mation or ﬁre hazard.

• Do not block air outlet or air inlet. It may cause malfunction.

• Do not step on top panel of outdoor unit or put heavy ob-

jects on it. It may cause damage or personal injury.

• When below phenomenon occurs, please turn off the heat

pump and disconnect power immediately, and then contact

the dealer or qualiﬁed professionals for service.

·Power cord is overheating or damaged.

·There’s abnormal sound during operation.

·Circuit breaker trips off frequently.

·The heat pump gives off burning smell.

·Indoor unit is leaking.

10 millnorway.com

EN

Description of terms

COP

COP (Coefﬁcient of Performance) is the deﬁnition of the heat factor of the heat pump. It in-

dicates the ratio between the added input and the delivered heat output of the heat pump.

If the heat pump heats the indoor air with an effect of 4000 Watts, while the power con-

sumption of the heat pump itself is 1000 Watts, the heating factor is 4.

The energy efﬁciency varies based on the outdoor climate.

SCOP

SCOP (Seasonal Coefﬁcient of Performance) is the deﬁnition of the heat factor of the heat

pump during a full year. It indicates the ratio between the added input and the delivered

heat output of the heat pump throughout a full year.

If the heat pump heats the indoor air with an effect of 5000 Watts, while the power con-

sumption of the heat pump itself is 1000 Watts, the seasonal heating factor is 5.

SCOP gives a better picture of the heat pump's efﬁciency than COP, because it takes into

account temperature ﬂuctuations in hot and cold periods throughout an entire year.

The SCOP can be found on the energy label and will vary based on geographical areas

that represents warmer, colder or average outdoor temperatures.

SEER

SEER (Seasonal Energy Efﬁciency Ratio) is the is the deﬁnition of the cooling factor of the

heat pump during a full cooling season.

It indicates the ratio between the added input and the delivered cooling output of the heat

pump during a cooling season.

The SEER value can be found on the energy label.

11

EN

Product speciﬁcations

Mill Compact Pro WiFi 7400

Heat Pump

Rated voltage: 220V-240V

Rated frequency: 50Hz

Max heating capacity: 7.4 kW

Max cooling capacity: 5.9 kW

Energy class (heating) A+/A+++/A

Energy class (cooling) A++

COP: 3.86

SCOP: 3.5 (colder)/4.3 (average)/5.7

(Warmer)

SEER: 7.5

Airﬂow volume m3/h:

950/850/760/640/500/420/350 m3/h

(depending on fan level)

WiFi

Compatible with Mill Norway App

Sound pressure level indoor unit: Max 47

dB/ Min 25 dB

Sound pressure level outdoor unit: Max 60

dB

Dimensions indoor unit: 770 mm × 290 mm

× 230 mm

Weight indoor unit: 10.5 kg

Dimensions outdoor unit: 1000 mm × 746

mm × 427 mm

Weight outdoor unit: 47 kg

Remote control (Battery type: AAA x 2

included)

Refrigerant type: R32

Mill Compact Pro WiFi 5200

Heat Pump

Rated voltage: 220V-240V

Rated frequency: 50Hz

Max heating capacity: 5.2 kW

Max cooling capacity: 4.5 kW

Energy class (heating) A+++/A+++/A+

Energy class (cooling) A+++

COP: 5.0

SCOP:4.0 (colder)/5.31 (average)/6.3

(warmer)

SEER: 9.5

Airﬂow volume m3/h:

800/650/600/500/400/300/250 m3/h

(depending on fan level)

WiFi

Compatible with Mill Norway App

Sound pressure level: Max 42 dB/ Min 23 dB

Sound pressure level outdoor unit: Max 56

dB

Dimensions indoor unit: 770 mm × 290 mm

× 230 mm

Weight indoor unit: 10 kg

Dimensions outdoor unit: 873 mm × 555 mm

× 330 mm

Weight outdoor unit: 36 kg

Remote control (Battery type: AAA x 2

included)

Refrigerant type: R32

12 millnorway.com

EN

Heating capacity

Mill Compact Pro WiFi 5200 Mill Compact Pro WiFi 7400

Outside

temperature Max heating out (W) Max heating out (W)

+7°C 5200 7002

0°C 4031 6251

-7°C 3870 5750

-10°C 3850 5186

-15°C 3438 4740

-20°C 2881 4312

-25°C 2309 4098

-30°C 1885 3888

Parts name

Indoor unit

air inlet

ﬁlter

horizontal louver

air outlet/

vertical louver

indicator

panel

Outdoor unit

air inlet

air outlet

Power indicator ON/OFF

Auto clean of evaporator

ON/standby

Timer

NOTE!

This is the general introduction, and the color of indicator is only for reference.

Please refer to the actual display. Display content may be different from the actual.

Please refer to the actual display.

13

EN

Operation and inroduction of

remote controller

Buttons on remote

controller

Wifi Health

Light

On/Off

Clock

Timer on LR-swing

Timer off

UD-swing

Introduction for icons

on display screen

Quiet

Set fan speed

Turbo mode

Send signal

Operation mode

Auto mode

Cool mode

Dry mode

Fan mode

Heat mode

X-FAN function

Humidity control

Power limiting operation

Set temperature

Indoor ambient temp

Indoor ambient humidity

TIMER ON / TIMER OFF

Set time

Left & right swing

Up & down swing

Child lock

Fast cool

Health function

WiFi function

LED

Auto LED

I feel

Sleep mode

14 millnorway.com

EN

Introduction for buttons on

remote controller

NOTE!

• During operation, point the remote control signal sender at the receiving window on

indoor unit.

• The distance between signal sender and receiving window should be no more than

8m, and there should be no obstacles between them.

• Signal may be interfered easily in the room where there is ﬂuorescent lamp or wire-

less telephone; remote controller should be close to indoor unit during operation.

• Replace new batteries of the same model when replacement is required.

• When you don't use remote controller for a long time, please take out the batteries.

• If the display on remote controller is fuzzy or there's no display, please replace

batteries.

• After putting through the power, the heat pump will give out a sound. Power indica-

tor is ON. After that, you can operate the heat pump by using remote controller.

• Under ON status, pressing the button on the remote controller, the signal icon

on the display of remote controller will blink once and the heat pump will give out a

"beep" sound, which means the signal has been sent to the heat pump.

• The indoor unit makes a "beep" sound every time it receives a signal from the re-

mote control. No sound means the unit has not registered the command.

On/off button

• Press this button to turn on the unit.

• Press this button again to turn off the unit.

Mode button

Press the mode button to select your required operation mode

AUTO COOL DRY FAN HEAT

• When selecting auto mode, the heat pump will operate automatically according to

the sensed temperature (this mode is not recommended when using a ﬁreplace or

opening windows, since it can switch between cooling and heating).. Press "Fan"

button can adjust fan speed. Press / button to adjust fan blowing angle.

• After selecting cool mode, the heat pump will operate under cool mode. Press " + "

or " - " button to adjust set emperature (this mode is not recommended when using

a ﬁreplace or opening windows, since it can switch between cooling and heating).

Press "Fan" button to adjust fan speed. Press / button to adjust fan blowing

angle.

15

EN

• When selecting dry mode, the heat pump operates at low speed under dry mode.

Under dry mode, fan speed can't be adjusted. Press / button to adjust fan

blowing angle.

• When selecting fan mode, the heat pump will only blow fan, no cooling and no

heating. Press "Fan" button to adjust fan speed. Press / button to adjust fan

blowing angle.

• When selecting heat mode, the heat pump operates under heat mode. Press " + " or

" - " button to adjust set temperature. Press "Fan" button to adjust fan speed. Press

/ button to adjust fan blowing angle.

NOTE!

To prevent cold air, after starting up heat mode, indoor unit will delay 15 minutes to blow

air (Actual delay time depends on indoor ambient temperature). Set temperature range

from remote controller: 1630°C (6186°F).

Fan button

The fan button is used for setting fan speed in the sequence that go from AUTO, , , ,

, , to , then back to AUTO.

AUTO

Low speed

Low-Medium speed

Medium speed

Medium-High speed

Hig h speed

Turbo speed

Quiet Speed

NOTE!

• It's low fan speed under dry mode.

• X-FAN function. Hold fan speed button for 2s in cool or dry mode, the icon is dis-

played and the indoor fan will continue operation for a few minutes in order to dry

the indoor unit even though you have turned off the unit. After energization, X-FAN

OFF is defaulted. X-FAN is not available in AUTO, fan or heat mode. This function

indicates that moisture on evaporator of indoor unit will be blowed after the unit is

stopped to avoid mould.

• Having set X-FAN function on: After turning off the unit by pressing " On/Off "

button, the indoor fan will continue running for a few minutes at low speed. In this

period, hold fan speed button for 2s to stop indoor fan directly.

• Having set X-FAN function off: After turning off the unit by pressing " On/Off " but-

ton, the complete unit will be off directly.

+ / - button

• Press " + " or " - " button once to increase or decrease set temperature. The interval

is 1°C(°F).

• Holding " + " or " - " button for 2s and the set temperature on remote controller will

change quickly.

16 millnorway.com

EN

• When releasing button after setting is ﬁnished, the temperature indicator on the

indoor unit will change accordingly.

Connect to WiFi

Full overview of your indoor temperature in the Mill -app

The smart function gives you a full overview and control of your indoor temperature in our

user-friendly Mill Norway app. The most user-friendly app for indoor air quality and temper-

ature based on consumer rating in App Store and Google Play. Be aware that the Mill Nor-

way app must be installed before you can connect your heat pump to your WiFi network.

You can then simply follow the instructions given in the app when connecting your heat

pump. The heat pump is conﬁgured using Bluetooth and connects directly to your router

via WiFi with 2,4 Ghz mode b/g/n. Minimum OS requirement: iOS 8.0 and Android 4.0. Go

to our help desk at www.millnorway.com for more information or if you have any questions

regarding the Mill Norway app, connecting to WiFi or other relating questions.

You can download the Mill Norway app

at Apple Store or Google Play

WiFi button

Press "WiFi" button to turn on WiFi function and search for the device in the Mill Norway-

App to connect.

The "WiFi" icon will be displayed on the remote controller. Hold "WiFi" button for 5s to turn

off WiFi function and "WiFi" icon will disappear.

Under off status, press "Mode" and "WiFi" buttons simultaneously for 1s, WiFi module will

restore factory settings.

Health button

• Press this button to turn on or turn off the health and cleaning functions in opera-

tion status.

• Press this button for the ﬁrst time to start cleaning function; LCD displays .

• Press the button for the second time to start health and cleaning functions simulta-

neously; LCD displays and .

• Press this button for the third time to quit health and cleaning functions simultane-

ously.

17

EN

• Press the button for the fourth time to start health function; LCD display .

• Press this button again to repeat the operation above.

UD (up and down)-Swing button

• Press this button to select up & down (vertical direction) swing angle. Fan blow

angle can be selected circularly as below:

no display

(horizontal louvers stops at

current position)

• When selecting , the heat pump blows air automatically. Horizontal louver will

automatically swing up & down at maximum angle. When selecting

, the heat pump is blowing fan at ﬁxed position. Horizontal louver will

stop at the ﬁxed position.

• Hold button above 2s to set your required swing angle. When reaching your

required angle, release the button.

NOTE!

• Press this button continuously for more than 2s, the main unit will swing back and

forth from up to down. When releasing the button, the unit will stop swinging and

present position of guide louver will be kept immediately.

• Under swing up and down mode, when the status is switched from off to , if

press this button again 2s later, status will switch to off status directly. By press-

ing this button again within 2s, the change of swing status will also depend on the

circulation sequence stated above.

L/R swing button

Press this button to select left & right (horizontal direction) swing angle. Fan blow angle

can be selected circularly as below.

no display

(stops at current

position)

NOTE!

• Press this button continuously more than 2s, the main unit will swing back and forth

from left to right. When releasing the button, the unit will stop swinging and present

position of guide louver will be kept immediately.

• Under swing left and right mode, when the status is switched from off to ,

if press this button again 2s later, status will switch to off status directly. By

pressing this button again within 2s, the change of swing status will also depend on

the circulation sequence stated above.

18 millnorway.com

EN

Clock button

Press this button to set clock time. icon on remote controller will blink. Press "+" or

"-" button within 5s to set clock time. Each pressing of "+" or "-" button, clock time will

increase or decrease 1 minute. If hold "+" or "-" button, 2s later, time will change quickly.

Release this button when reaching your required time. Press "CLOCK" button to conﬁrm

the time. icon stops blinking.

NOTE!

• Clock time adopts 24-hour mode.

• The interval between two operations can't exceed 5s. Otherwise, remote controller

will quit setting status. Operation for TIMER ON/TIMER OFF is the same.

Timer on/Timer off button

TIMER ON button

• "TIMER ON" button can set the time for timer on.

• After pressing this button, icon disappears and the word "ON" on remote con-

troller blinks.

• Press " + " or " - " button to adjust TIMER ON setting.

• After each pressing " + " or " - " button, TIMER ON setting will increase or decrease

1 min. Holding " + " or " - " button, 2s later, the time will change quickly until reaching

your required time. Press "TIMER ON" to conﬁrm it. The word "ON" will stop blinking.

icon resumes displaying.

• Cancel TIMER ON: Under the condition that TIMER ON is started up, press "TIMER

ON" button to cancel it.

TIMER OFF button

• "TIMER OFF" button can set the time for timer off.

• After pressing this button, icon disappears and the word "OFF" on remote con-

troller blinks.

• Press " + " or " - " button to adjust TIMER OFF setting. After each pressing " + " or

" - " button, TIMER OFF setting will increase or decrease 1min. Holding " + " or " - "

button, 2s later, the time will change quickly until reaching your required time. Press

"TIMER OFF" and the word "OFF" will stop blinking. icon resumes displaying.

• Under the condition that TIMER OFF is started up, press "TIMER OFF" button to

cancel it.

NOTE!

Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.

• Before setting TIMER ON or TIMER OFF, please adjust the clock time.

• When turning on TIMER ON or TIMER OFF function, set this function valid all the

time and the heat pump will be turned on or turned off at set temperature every

day. ON/OFF button has no affect to setting. If this function is not required, use the

remote controller to cancel it.

Sidan laddas ...

MILL COMPACT PRO WIFI 5200 VARMEPUMPE Bruksanvisning

Denna manual är också lämplig för

MILL COMPACT PRO WIFI 5200 VARMEPUMPE Bruksanvisning

på andra språk

Relaterade papper

Andra dokument