Samsung PS50C685G5S Användarmanual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at

BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)

www.samsung.com/be_fr (French)

CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

DENMARK 70 70 19 70 www.samsung.com/dk

FINLAND 030 - 6227 515 www.samsung.com/

FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.de

HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu

ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it

LUXEMBURG 261 03 710 www.samsung.com/lu

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND 0 801 1SAMSUNG (172678)

022-607-93-33

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk

SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se

TURKEY 444 77 11 www.samsung.com/tr

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk

EIRE 0818 717100 www.samsung.com/ie

SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch

www.samsung.com/ch_fr/(French)

LITHUANIA 8-800-77777 www.samsung.com/lt

LATVIA 8000-7267 www.samsung.com/lv

ESTONIA 800-7267 www.samsung.com/ee

BN68-03142B-01

Plasma TV user manual

Plasma TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. _____________

[PC680_XE]BN68-03142B-01L05.indb 1 2010-09-27 오후 4:17:30

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are

broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local

dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast

transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so

on, are not included in this speciﬁcation. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may

be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

✎

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV

performance in the local SAMSUNG Authorized Dealer, or the Samsung Call centre whether it can be improved by reconﬁguring TV setting or

not.

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image

retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 16 of this manual to reduce the degree of

brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the

product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or

humidity. This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to

the screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

[PC680_XE]BN68-03142B-01L05.indb 2 2010-09-27 오후 4:17:31

3

ENGLISH

English

Contents

Getting Started

4

4 Accessories

5 Viewing the Control Panel

6 Viewing the Remote Control

7 Connecting to an Antenna

7 Plug & Play (Initial Setup)

Connections

8

8 Connecting to an AV Device

9 Connecting to an Audio Device

10 Changing the Input Source

Basic Features

11

11 How to Navigate Menus

11 Using the INFO button (Now & Next guide)

11 Planning Your Viewing

13 Channel Menu

16 Picture Menu

21 Sound Menu

22 Setup Menu

25 Support Menu

Advanced Features

26

26 Connecting to a PC

27 Network Connection

34 Media Play

41 Anynet+

44 AllShare

Other Information

46

46 Analogue Channel Teletext Feature

47 Installing the Wall Mount

48 Assembling the Cables

48 Securing the TV to the wall

49 Troubleshooting

52 Speciﬁcations

53 Securing the Installation Space

54 Index

Check the Symbol!



This function can be used by

pressing the TOOLS button on the

remote control.

Note One-Touch Button

TOOLS

[PC680_XE]BN68-03142B-01L05.indb 3 2010-09-27 오후 4:17:32

4

English

Getting Started

Accessories

✎

Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.

✎

The items’ colour and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

y Remote Control & Batteries (AAA x 2)

y Owner’s Instructions

y Cleaning Cloth

y Power Cord

y Warranty Card / Safety Guide (Not available in some locations)

y Blanking Bracket y Cable Tie y Ferrite Core (2EA)

See separate guide for installing the stand.

y Stand (1EA) y Guide Stand (1EA) y Screws (8EA)

✎

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable,

open the ferrite core and clip it around the cable near the plug as shown in the figure.

x

Distance between the ferrite core and one end of the cord put into the TV set

A

B

y A : below 50 mm

4EA (M4 X L10)

4EA (M4 X L12)

[PC680_XE]BN68-03142B-01L05.indb 4 2010-09-27 오후 4:17:34

5

01 Getting Started

English

Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE



Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER



button on the remote control.

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.



Adjusts the volume. In the OSD, use the



buttons as you would use the ◄

and ► buttons on the remote control.



Changes the channels. In the OSD, use the



buttons as you would use the

▼ and ▲ buttons on the remote control.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.



(Power)

Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Remote control sensor

Speakers

Power Indicator

[PC680_XE]BN68-03142B-01L05.indb 5 2010-09-27 오후 4:17:35

6

Getting Started

English

Viewing the Remote Control

✎

This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume

buttons.

Installing batteries (Battery size: AAA)

✎

NOTE

x

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote control.

Avoid using nearby special fluorescent light or neon signs.

x

The colour and shape may vary depending on the model.

CH LIST

MUTE

POWER

SOURCE

PRE-CH

GUIDE

MEDIA.P

MENU

TOOLS

RETURN

P.MODE

AD

P.SIZE

SUBT.

DUAL

EXIT

INFO

TTX/MIX

A B C D

f-g

ON/OFF

Turns the TV on and off.

Displays and selects the available video

sources (p. 10).

Turns the remote control light on or

off. When on, the buttons become

illuminated for a moment when pressed.

(Using the remote control with this button

set to On will reduce the battery usage

time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen

(p. 13).

Displays the EPG (Electronic Programme

Guide) (p. 11).

Displays information on the

TV screen.

Exits the menu.

Have direct access to channels.

Adjusts the volume.

Alternately select Teletext ON, Double,

Mix or OFF.

Opens the OSD.

Displays Media Play (USB) (p. 34).

Quickly select frequently used functions.

Returns to the previous menu.

Selects the on-screen menu items and

changes the values seen on the menu.

These buttons are for the

Channel Manager, Media Play (USB)

menu, etc.

Use these buttons in Media Play (USB)

and Anynet+ (HDMI-CEC) modes

(p. 34, 41).

(



: Controls recording for Samsung

recorders that have the Anynet+

feature.)

P.MODE: Press to select the picture

mode (p. 16).

DUAL -: Sound effect selection

(p. 22).

: Sets the video, which provided with

3D signal (p. 19).

AD:

Turns the audio description on and

off (not available in some locations) (p. 21).

P.SIZE: Selects the picture size (p. 17).

SUBT.: Displays digital subtitles (p. 24).

[PC680_XE]BN68-03142B-01L05.indb 6 2010-09-27 오후 4:17:35

7

01 Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

✎

The PDP device may interfere with an amateur radio or AM radio.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER



button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1

Selecting a language

Press the ▲ or ▼ button, then press the ENTER



button.

Select the desired OSD (On Screen Display) language.

P

POWER

2

Selecting Store Demo or

Home Use

Press the ◄ or ► button, then press the ENTER



button.

• Select the Home Use mode. Store Demo mode is for retail environments.

• To return the unit’s settings from Store Demo to Home Use (standard): Press

the volume button on the TV. When the OSD volume is displayed, press and hold

MENU for 5 sec.

3

Selecting a country

Press the ▲ or ▼ button, then press the ENTER



button.

Select the appropriate country.

4

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER



button.

Select Air, Cable or Satellite.

5

Selecting a channel

Press the ▲ or ▼ button, then press the ENTER



button.

Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you

to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel →

Auto Store (p. 13).

✎

When Air or Cable is selected ﬁrst: After all Air or Cable channels are stored, the step for storing Satellite

channels is displayed.

✎

When Satellite is selected ﬁrst: After all Satellite channels are stored, the step for storing Air or Cable

channels is displayed.

✎

Press the ENTER



button at any time to interrupt the memorisation process.

6

Setting the Clock Mode Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button to select Auto, then press the ENTER



button.

7

Time Zone

Press the ▲ or ▼ button to select the your time zone, then press the ENTER



button. (depending on the

country)

8

Viewing the HD Connection

Guide.

The connection method for the best HD screen quality is displayed.

9

Enjoy your TV.

Press the ENTER



button.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to

change the PIN number, use the Change PIN function.

ANT OUT

Satellite Antenna

VHF/UHF Antenna

or

Cable

Power Input

[PC680_XE]BN68-03142B-01L05.indb 7 2010-09-27 오후 4:17:36

8

English

ConnectionsConnections

Connecting to an AV Device

Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver

✎

HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN

x

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable

connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVI

AUDIO IN jacks for audio.

x

If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI

versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /

annoying flicker / abnormal colour).

x

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and

request an upgrade.

x

It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a

connection error may occur.

Using a Component (up to 1080p) or Audio/Video Cable (480i only) and Scart Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

✎

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

✎

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

SB 1

1 (DVI)

3

2

SB 1

1 (DVI)

3

2

Y

W

R

W

R

W

R R GB

R

G

B

W

R

EXT

PR PB Y

COMPONENT OUT

AUDIO OUT

R-AUDIO-L

VIDEO OUT

AUDIO OUT

R-AUDIO-L

G

Y

W

R

G

B

WR

VCR

DVD /

Blu-ray player

Red White YellowRed

Red

White

Blue Green

VCR / DVD

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

USB 2

HDMI IN 4

W

R

WR

DVD /

Blu-ray player

DVD /

Blu-ray player

Red White

[PC680_XE]BN68-03142B-01L05.indb 8 2010-09-27 오후 4:17:39

9

English

02 Connections

Connecting to an Audio Device

Using an Optical (Digital) or Headphone Connection

Available devices: digital audio system, ampliﬁer, DVD home theatre

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV’s

optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD

home theatre. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB

(Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the

amplifier or DVD home theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

✎

Headphones



: You can connect your headphones to the headphones output on your set. While the

headphones are connected, the sound from the built-in speakers will be disabled.

x

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

OPTICAL

digital audio system

[PC680_XE]BN68-03142B-01L05.indb 9 2010-09-27 오후 4:17:39

10

English

Connections

Changing the Input Source

Source List

Use to select TV or other external input

sources such as DVD / Blu-ray players /

cable box / satellite receivers (Set-Top Box)

connected to the TV.

■ TV / Ext. / PC / AV / Component

/ HDMI1/DVI / HDMI2 / HDMI3 /

HDMI4 / USB

✎

In the Source List, connected

inputs will be highlighted.

✎

Ext. and PC always stay activated.

Edit Name

■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC / DVI

Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name

the device connected to the input jacks to make your

input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @

60Hz is connected to the HDMI IN 1(DVI) port,

you should set to DVI PC mode under Edit Name.

✎

When connecting an HDMI/DVI cable to the HDMI

IN 1(DVI) port, you should set to DVI PC or DVI

Devices mode under Edit Name.

✎

If an HDMI cable is connected to the

HDMI IN 1(DVI) port, the audio may not work. In

this case, connect to the PC/DVI AUDIO IN port.

CONNECTIONS COMMON INTERFACE Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

y If you don’t insert the “CI or CI+ CARD”, some channels will

display the message “Scrambled Signal”.

y The pairing information containing a telephone number, the “CI or

CI+ CARD” ID the Host ID and other information will be displayed

in about 2~3 minutes. If an error message is displayed, please

contact your service provider.

y When the conﬁguration of channel information has ﬁnished, the

message “Updating Completed” is displayed, indicating the

channel list is updated.

– Depending on the model, a message requesting your Parental

Lock password may appear when the CI or CI+ CARD is

reinserted.

– Depending on the model, even if the Parental Lock is set to

Allow All a message requesting your password may appear for

adult(18 years and above) programmes.

✎

NOTE

x

You must obtain a “CI or CI+ CARD” from a local cable service provider.

x

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may

cause damage to it.

x

Insert the “CI or CI+ CARD” in the direction marked on the card.

x

The location of the COMMON INTERFACE slot may be different depending on the model.

x

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

x

If you have any problems, please contact a service provider.

x

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

x

When you are watching the satellite TV, remove the CI CARD of terrestrial and cable. The screen will be distorted or

will not be seen.

SOURCE

[PC680_XE]BN68-03142B-01L05.indb 10 2010-09-27 오후 4:17:40

11

English

03 Basic Features

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

C

H LI

ST

M

UTE

P

O

WE

R

SOU

RCE

P

RE-CH

GUID

E

MEDIA

.

P

MENU

TOO

L

S

RETURN

P

.MOD

E

A

D

P

.

S

IZ

E

SU

BT

.

DUA

L

EXIT

INF

O

TTX

/

MI

X

A

B

C

D

f

-

g

O

N/

O

FF

MENU

RETURN

EXIT

3

4

1

2

1 ENTER



/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

2 RETURN button: Returns to the previous menu.

3 MENU button: Displays the main on-screen menu.

4 EXIT button: Exits the on-screen menu.

How to operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU



The main menu option appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼ Select an icon with the ▲ or ▼

button.

3

ENTER



Press ENTER



to access the

sub-menu.

4

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

5

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER



Press ENTER



to complete the

conﬁguration.

7

EXIT



Press EXIT.

Using the INFO button (Now & Next guide)

The display identiﬁes the current channel

and the status of certain audio-video

settings.

The Now & Next guide shows daily TV

programme information for each channel

according to the broadcasting time.

y Scroll ◄, ► to view information for a

desired programme while watching the

current channel.

y Scroll ▲, ▼ to view information for other channels. If you

want to move to the currently selected channel, press

the ENTER



button.

DTV Air

15

DEF

18:00 ~ 6:00

Life On Venus Avenue

Unclassified

No Detaild Information

E

18:11 Thu 6 Jan

Watch

Information

Planning Your Viewing

Guide

The EPG (Electronic Programme Guide)

information is provided by broadcasters.

Using programme schedules provided by

broadcasters, you can specify programmes

you want to watch in advance so that

the channel automatically changes to

the selected programme channel at the

speciﬁed time. Programme entries may

appear blank or out of date depending on a channel status.

Using Channel View

INFO

GUIDE

DTV Air 800 five

Home and Away

18:00 - 18:30

Drama

Dani is devastated when scott makes clear his views on marriage...

27

28

800

24

16

6

Discovery

DiscoveryH&L

five

price-drop.tv

QVC

R4DTT

American Chopper

Programmes resume at 06:00

Home and...

No Information

QVC Selection

No Information

Tine Team

Fiv...

18:00 - 19:00 19:00 - 20:00

)

Family Affairs

)

Dark Angel

800 ﬁve

View Mode +24 Hours Ch. Mode Information



Page



Watch

2:10 Tue 1 Jun

Guide

Channel View - TV

1 2 3 4 5 6

Today

[PC680_XE]BN68-03142B-01L05.indb 11 2010-09-27 오후 4:17:43

12

English

Basic Features

Using Scheduled View

1

Red (View Mode): View the list of programmes that

are playing now or coming up.

2

Yellow (+24 Hours): Viewing the list of programmes to

be broadcasted after 24 hours.

3

Blue (Ch. Mode): Select the type of channels you

want to display on the Channel View window.

– The Ch. Mode differs according to the antenna

source.

4 Information: Displays details of the selected

programme.

5



(Page): Move to next or previous page.

6 ENTER



button

– When selecting the current programme, you can

watch the selected programme.

– When selecting the future programme, you can

reserve to watch the selected programme. To cancel

the schedule, press the ENTER



button again and

select Cancel Schedules.

Channel Manager

Delete or set favourites channels and use the programme

guide for digital broadcasts. Select a channel in the

Channels, My Channels, Satellite or Scheduled screen.

■ Channels: Shows the channel list according to

channel type.

■



My Channels: Shows the group of the channel.

■

Satellite: Shows the channel list according to

satellite signal.

■

Scheduled: Shows all the currently reserved

programmes.

✎

Using the colour buttons with the Channel Manager

x

Red (Antenna): Toggle among Air, Cable or

Satellite or Canal Digital Sat.

x

B

Green (Zoom): Enlarges or shrinks a channel

number.

x

Yellow (Select): Select desired channels and press

the Yellow button to set all the selected channels at

the same time. The



mark appears to the left of

the selected channels.

x

Blue (Sort): Change the list ordered by channel

name or channel number.

x



(Page): Move to next or previous page.

x



(Tools): Displays the Channel Manager option

menu. (The options menus may differ depending on

the situation.)

Channel Status Display Icons

Icons Operations



An analogue channel.



A channel selected.



A channel set as a Favourite.



A programme currently being broadcast.



A locked channel.



A reserved programme.

c 1 1futech

2 * 24ore.tv

15 abc1

3 BBC World

23 bid-up.tv

33 Boonerang

32 Cartoon Nwk

5 Class News

4 \ Coming Soon

27 Discovery

r

Satellite Antenna

B

Zoom Select Sort



Page



Tools

Channels

All

TV

Radio

Data/Other

Free

Scrambled

Searched

DTV Air 800 five

Family Affairs

18:00 - 18:30

Drama

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

18:30

19:15

)

Family Affairs

)

Dark Angel

800

five

800 ﬁve

View Mode Information



Cancel

2:10 Tue 1 Jun

Guide

Scheduled View

1 4 6

Today

[PC680_XE]BN68-03142B-01L05.indb 12 2010-09-27 오후 4:17:45

13

English

03 Basic Features

 Using Favourite Channels



My Channels

(in Channel Manager)

Shows all favourite channels.

■ Edit My Channels



: You can set the selected

channels to desired my channels group.

✎

The “



” symbol will be displayed and the channel will

be set as a my channel.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel in the my channel groups

you want among 1, 2, 3 and 4.

x

One or more groups can be selected.

3. After you have changed the settings, the channel list

for each group can be viewed in my channels.

Channel List

You can see all the channels searched.

Channel Menu

 Returning Channels

Antenna (Air / Cable / Satellite / Canal Digital Sat)

Before your television can begin memorising the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air, Cable, Satellite or Canal

Digital Sat system).

Country

The PIN input screen appears. Enter your 4 digit PIN number.

■ Digital Channel: Change the country for digital

channels.

■ Analogue Channel: Change the country for analogue

channels.

Auto Store

Scans for a channel automatically and stores in the TV.

✎

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers. If

a channel is locked using the Child Lock function, the

PIN input window appears.

■ Antenna Source (Air / Cable / Satellite / Canal Digital Sat):

Select the antenna source to memorise.

When Antenna Source is set to Air or Cable:

■ Channel Source (Digital & Analogue / Digital /

Analogue): Select the channel source to memorise.

When selecting Cable → Digital & Analogue or Digital:

Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick): Scans for all

channels with active broadcast stations and stores them

in the TV.

✎

If you select Quick, you can set up the Network,

Network ID, Frequency, Modulation, and

Symbol Rate manually by press the button on the

remote control.

Network (Auto / Manual): Selects the Network ID

setting mode among Auto or Manual.

Network ID: When Network is Manual, you can set up

Network ID using the numeric buttons.

Frequency: Displays the frequency for the channel.

(differs in each country)

Modulation: Displays available modulation values.

Symbol Rate: Displays available symbol rates.

■ Cable Mode (Cable Network / SMATV Network)

(Norway only): Select the Cable mode to memorise.

✎

This function is available when you have multiple

network.

When Antenna Source is set to Satellite:

■ Channel Type (All / TV / Radio): Select the Channel

type to memorise.

■ Satellite: Selects the satellite to scan.

■ Scan Mode (All Channels / Free Channels Only):

Selects the scanning mode of the selected satellite.

CH LIST

c 1 1futech

2 * 24ore.tv

15 abc1

3 BBC World

23 bid-up.tv

33 Boonerang

32 Cartoon Nwk

5 Class News

4 \ Coming Soon

27 Discovery

r

Satellite Antenna

B

Zoom Select Sort



Page



Tools

Channels

All

TV

Radio

Data/Other

Free

Scrambled

Searched

Edit My Channels

Lock

Timer Viewing

Edit Channel Number

Delete

Deselect All

▼

[PC680_XE]BN68-03142B-01L05.indb 13 2010-09-27 오후 4:17:46

14

English

Basic Features

Manual Store

(Not available when Antenna Source is set to Canal Digital Sat)

Scans for a channel manually and stores in the TV.

✎

If a channel is locked using the Child Lock function,

the PIN input window appears.

When Antenna Source is set to Air or Cable:

■ Digital Channel: When scanning has ﬁnished, channels

are updated in the channel list.

✎

When selecting Antenna → Air: Channel,

Frequency, Bandwidth

✎

When selecting Antenna → Cable: Frequency,

Modulation, Symbol Rate

■ Analogue Channel (Programme, Colour System,

Sound System, Channel, Search): If there is abnormal

sound or no sound, reselect the sound standard

required.

✎

Channel mode

x

P (programme mode): When tuning is complete,

the broadcasting stations in your area have been

assigned to position numbers from P0 to P99. You

can select a channel by entering the position number

in this mode.

x

C (aerial channel mode) / S (cable channel mode):

These two modes allow you to select a channel

by entering the assigned number for each aerial

broadcasting station or cable channel.

When Antenna Source is set to Satellite:

■ Satellite: Selects the satellite using the up/down

buttons.

■ Transponder: Selects the transponder using the up/

down buttons.

■ Scan Mode (All Channels / Free Channels Only):

Selects either free or all channels to store.

■ Network Search (Disable / Enable): Enable / Disable

network search using the up/down buttons.

■ Signal Quality: Display the current status of

broadcasting signal.

✎

Information on a satellite and its transponder is subject

to change depending on the broadcasting conditions.

✎

When setting is completed, move to Search and press

the ENTER



button. Channel scan is started.

Satellite System Setup

The PIN input screen appears. Enter your 4 digit PIN number.

Satellite System Setup is available when Antenna is set to

Satellite or Canal Digital Sat. Before running Auto Store,

Set Satellite System Setup. Then channel scan is run

normally.

■ Satellite Selection: You can choose the satellites for

this TV.

✎

This function is available when Antenna is set to

Satellite.

■ LNB Power (Off / On): Enables or disables the power

supply for the LNB.

■ LNB Settings: Conﬁgures the outdoor equipment.

– Satellite: Selects the satellite for receiving digital

broadcasts.

– Transponder: Selects a transponder from the list or

adds a new transponder.

– DiSEqC Mode: Selects DiSEqC mode for the

selected LNB.

– Lower LNB Oscillators: Sets the LNB oscillators to a

lower frequency.

– Upper LNB Oscillators: Sets the LNB oscillators to a

higher frequency.

– Tone 22 kHz (Off / On / Auto): Selects the Tone 22

kHz depending on the LNB type. For a universal LNB

it should be Auto.

– Signal Quality: Display the current status of

broadcasting signal.

■ Positioner Settings: Conﬁgures the antenna positioner.

Positioner (On / Off): Enables or disables the positioned

control.

Positioner Type (USALS / DiSEqC 1.2): Sets

the positioned type between DiSEqC 1.2 and

USALS(Universal Satellite Automatic Location System).

– My Longitude: Sets the longitude for my location.

– My Latitude: Sets the latitude for my location.

– Satellite Longitude Settings: Sets the longitude of

user deﬁned satellites.

User Mode: Sets the position of satellite antenna

according to each satellite. If you store the current

position of satellite antenna according to a certain

satellite, when the signal of that satellite is needed,

the satellite antenna can be moved to pre-populated

position.

– Satellite: Selects the satellite to set the position for.

– Transponder: Selects a transponder from the list for

signal reception.

– Moving Mode: Selects the movement mode between

discrete and continuous movement.

– Step Size: Adjusts the step size degrees for the

antenna rotation. Step Size is available when Moving

Mode is set to Step.

[PC680_XE]BN68-03142B-01L05.indb 14 2010-09-27 오후 4:17:46

15

English

03 Basic Features

– Go to Stored Position: Rotates the antenna to the

stored satellite position.

– Antenna Position: Adjusts and stores the antenna

position for the selected satellite.

– Store Current Position: Stores current position as

the selected positioner limit.

– Signal Quality: Display the current status of

broadcasting signal.

Installer Mode: Sets limits to the scope of movement

of satellite antenna or reset the position. Generally,

installation guide uses this function.

– Limit Position (East / West): Selects the direction of

the positioner Limit.

– Antenna Position: Adjusts and stores the antenna

position for the selected satellite.

– Store Current Position: Stores the current position

as the selected positioner Limit.

– Go to Zero: Moves the antenna to the reference

position.

– Reset Positioner Limit: Allows the antenna to rotate

over the full arc.

■ Reset All Setting (OK / Cancel): All satellite settings will

be reset to the initial values.

 Editing Channels

Channel Manager Option Menu

(in Channel Manager)

1. Select a channel and press the TOOLS button.

2. Edit the channel name or number using the Edit

Channel Name or Edit Channel Number menu.

■ Edit Channel Name (analogue channels only): Assign

your own channel name.

■ Edit Channel Number (digital channels only): Edit the

number by pressing the number buttons desired.

 Other Features

Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and

symbol rate for a cable network search.

■ Freq.Start / Freq.Stop: Set the start or stop frequency

(differs in each country)

■ Symbol Rate: Displays available symbol rates.

■ Modulation: Displays available modulation values.

Channel Manager

Channel Manager Option Menu

Set each channel using the Channel Manager menu options

(Lock / Unlock, Timer Viewing, Sort, Reorder, Delete,

Select All / Deselect All). Option menu items may differ

depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ Lock / Unlock: Lock a channel so that the channel

cannot be selected and viewed.

✎

This function is available only when the Child

Lock is set to On.

✎

The PIN input screen appears. Enter your 4-digit

PIN, the default of which is “0-0-0-0”. Change the

PIN using the Change PIN option.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the

current time ﬁrst to use this function.

✎

When a digital channel is selected in Channel

Manager, press the ► button to view the digital

Programme.

■ Sort (analogue channels only): This operation allows

you to change the programme numbers of the stored

channels. This operation may be necessary after using

the auto store.

■ Reorder (when the Antenna was set to Satellite):

Rearrange the channel manager in numerical order.

■ Delete: You can delete a channel to display the channels

you want.

■ Select All / Deselect All: Select all the channels

or deselect all the selected channels in the channel

manager.

Channel List Transfer

The PIN input screen appears. Enter your 4 digit PIN number.

Imports or exports the channel map. You should connect a

USB storage to use this function.

■ Import from USB: Import channel list from USB.

■ Export to USB: Export channel list to USB. this function

is available when USB is connected.

[PC680_XE]BN68-03142B-01L05.indb 15 2010-09-27 오후 4:17:46

16

English

Basic Features

Scheduled

(in Channel Manager)

You can view, modify or delete a show you have reserved to

watch.

■ Change Info: Change a show you have reserved to

watch.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

■ Information: Display a show you have reserved

to watch. (You can also change the reservation

information.)

■ Select All / Deselect All: Select or deselect all reserved

programmes.

Edit Channel Number (Disable / Enable)

(digital channels only)

When this function is enable, you can edit channel number

(p. 15). But you cannot update channel information

automatically.

Fine Tune

(analogue channels only)

If the signal is weak or distorted, ﬁne tune the channel

manually.

✎

Fine tuned channels are marked with an asterisk “*”.

✎

To reset the fine-tuning, select Reset.

Picture Menu

 Changing the Preset Picture Mode

Mode

Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal

environment.

■ Movie: Suitable for watching movies in

a dark room.

 Adjusting Picture Settings

Cell Light / Contrast / Brightness /

Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality control.

✎

NOTE

x

In analogue TV, Ext., AV modes of the PAL system,

the Tint (G/R) function is not available.

x

In PC mode, you can only make changes to Cell

Light, Contrast and Brightness.

x

Settings can be adjusted and stored for each

external device connected to the TV.

 Economical Solutions

Eco Solution

■ Energy Saving (Off / Low / Medium / High / Picture

Off)



: This adjusts the brightness of the TV

in order to reduce power consumption. If you select

Picture Off, the screen is turned off , but the sound

remains on. Press any button except volume button to

turn on the screen. Until the screen turned on again, it

becomes about 4 seconds disturbance.

■ Eco Sensor: To enhance your power savings; the

picture settings will automatically adapt to the light in the

room.

✎

If you adjust the Cell Light, the Eco Sensor will

be set to Off.

Min Cell Light: When Eco Sensor is On, the minimum

screen brightness can be adjusted manually.

✎

If Eco Sensor is On, the display brightness

may change (become slightly darker or brighter)

depending on the surrounding light intensity.

■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):

To avoid unnecessary energy consumption, set how long

you want the TV to remain on if it's not receiving a signal.

✎

Disabled when the PC is in power saving mode.

 Changing the Picture Options

Advanced Settings

(available in Standard / Movie mode)

You can adjust the detailed setting for the screen including

colour and contrast.

✎

In PC mode, you can only make changes to Dynamic

Contrast, Gamma and White Balance.

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High): Adjust

the screen contrast.

P.MODE

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off

Colour Space : Native

White Balance

▼



Move



Enter



Return

[PC680_XE]BN68-03142B-01L05.indb 16 2010-09-27 오후 4:17:47

17

English

03 Basic Features

■ Gamma: Adjust the primary colour intensity.

■ RGB Only Mode (Off / Red / Green / Blue): You can

adjust Colour or Tint (G/R) of Red, Green or Blue for

the picture from an external device (DVD player, home

theatre, etc.).

■ Colour Space (Auto / Native): Adjust the range of

colours available to create the image.

■ White Balance: Adjust the colour temperature for a

more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,

green, blue) brightness.

Reset: Resets the White Balance to it’s default settings.

Interval: Select interval to adjust.

Red: Adjust the red level.

Green: Adjust the green level.

Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default

settings.

■ Flesh Tone: Emphasize pink “Flesh Tone.”

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

Picture Options

✎

In PC mode, you can only make changes to the Colour

Tone, Size and Screen Burn Protection.

■ Colour Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the

picture mode is Dynamic.

✎

Settings can be adjusted and stored for each

external device connected to an input on the TV.

■ Size: Your cable box/satellite receiver

may have its own set of screen sizes as

well. However, we highly recommend

you use 16:9 mode most of the time.

Auto Wide: Automatically adjusts the

picture size to the 16:9 aspect ratio.

16:9: Adjusts the picture size to 16:9 for DVDs or wide

broadcasting.

Wide Zoom: Magniﬁes the picture size more than 4:3.

✎

Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magniﬁes the 16:9 wide pictures vertically to ﬁt

the screen size.

✎

Adjusts the Position or Size by using ▲, ▼

button.

4:3 : The default setting for a movie or normal

broadcasting.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and centre

of the screen may cause image retention(screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.

✎

NOTE

x

Depending on the input source, the picture size

options may vary.

x

The available items may differ depending on the

selected mode.

x

In PC mode, only 16:9 and 4:3 modes can be

adjusted.

x

Settings can be adjusted and stored for each

external device connected to an input on the TV.

x

After selecting Screen Fit in HDMI (1080i / 1080p)

or Component (1080i / 1080p) mode: Adjusts the

Position or Size by using ▲, ▼, ◄, ► button.

x

If you use the Screen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and

right as in the overscan function.

P.SIZE

Picture Options

Colour Tone : Normal ►

Size : Auto Wide

Screen Mode : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

▼



Move



Enter



Return

[PC680_XE]BN68-03142B-01L05.indb 17 2010-09-27 오후 4:17:47

18

English

Basic Features

■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):

Available only when picture size is set to Auto Wide. You

can determine the desired picture size at the 4:3 WSS

(Wide Screen Service) size or the original size. Each

European country requires different picture size.

✎

Not available in PC, Component or HDMI mode.

■ Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualisation): When the broadcast signal is

weak, some static and ghosting may appear. Select one

of the options until the best picture is displayed.

Auto Visualisation: When changing analogue channels,

displays the intensity of the current signal and deﬁnes

the screen noise ﬁlter.

✎

Only available for analogue channels.

■ MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide improved

picture quality.

■ HDMI Black Level (Normal / Low): Selects the black

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode (Off / Auto1 / Auto2): Sets the TV to

automatically sense and process ﬁlm signals from all

sources and adjust the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■ Screen Burn Protection: To reduce the possibility of

screen burn, this unit is equipped with screen burn

prevention technology. The Time setting allows you to

Programme the time between movement of the picture

in minutes.

Pixel Shift (Off / On): Using this function, you can

minutely move pixels on the PDP in horizontal or vertical

direction to minimize after images on the screen.

✎

Optimum condition for pixel shift

Item

TV/AV/Component/

HDMI/PC

Horizontal 0~4 4

Vertical 0~4 4

Time (minute) 1~4 min 4 min

✎

The Pixel Shift value may differ depending on the

monitor size (inches) and mode.

✎

This function is not available in the Screen Fit

mode.

Auto protection Time (10 min / 20 min / 40 min /

1 hour / Off): If the screen remains idle with a still image

for a certain period of time deﬁned by the user, the

screen saver is activated to prevent the formation of

ghost images on the screen.

Scrolling: This function removes after-images on the

screen by moving all the pixels on the PDP according

to a pattern. Use this function when there are remaining

after images or symbols on the screen especially when

you displayed a still image on the screen for a long time.

✎

The after-image removal function has to be

executed for a long time (approximately 1 hour)

to effectively remove after-images on the screen.

If the after-image is not removed after performing

the function, repeat the function again.

✎

Press any key on the remote control to cancel this

feature.

Side Grey (Light / Dark): When you watch TV with the

screen ratio of 4:3, the screen is prevented from any

damage by adjusting the white balance on both extreme

left and right sides.

 Viewing TV using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR

3D PICTURES.

Read and understand the following safety information

before using the TV’s 3D function.



WARNING

x

Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea and

headaches. If you experience any such symptom,

stop viewing 3D TV, remove 3D Active Glasses and

rest.

x

Watching 3D images for an extended period of time

may cause eye strain. If you feel eye strain, stop

viewing 3D TV, remove your 3D Active Glasses and

rest.

x

A responsible adult should frequently check on

children who are using the 3D function. If there are

any reports of tired eyes, headaches, dizziness, or

nausea, have the child stop viewing 3D TV and rest.

x

Do not use the 3D Active Glasses for other purposes

(such as general eyeglasses, sunglasses, protective

goggles, etc.)

x

Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving around

may result in injuries due to running into objects,

tripping, and/or falling.

[PC680_XE]BN68-03142B-01L05.indb 18 2010-09-27 오후 4:17:47

19

English

03 Basic Features

3D

This exciting new feature enables you to

view 3D content. In order to fully enjoy

this feature, you must purchase a pair

of Samsung 3D Active Glasses (SSG-

2100AB, SSG-2200AR, SSG-2200KR) to

view 3D video.

Samsung 3D Active Glasses are sold

separately. For more detailed purchasing

information, contact the retailer where you purchased this TV.

■ 3D Mode: Select the 3D input format.

✎

If you want to feel the 3D effect fully, please wear

the 3D Active Glasses first, and then select

3D Mode from the list below that provides the

best 3D viewing experience.

✎

When watching 3D images, turn on 3D Active

Glasses.

3D Mode Operation

Off Turns the 3D function off.

2D → 3D

Changes a 2D image to 3D.

Side by Side

Displays two images next to

each other.

Top & Bottom

Displays one image above

another.

Line by Line

Displays the images for the left

and right eye alternately in rows.

Vertical Stripe

Displays the images for the

left and right eye alternately in

columns.

Checker

Board

Displays the images for the

left and right eye alternately in

pixels.

Frequency

Displays the images for the

left and right eye alternately in

frames.

✎

“Side by Side” and “Top & Bottom” are available

when the resolution is 720p, 1080i and 1080p

in DTV, HDMI and USB mode or set to PC

connecting through HDMI/DVI cable.

✎

“Vertical Strip”, “Line by Line” and “Checker

Board” are available when the resolution is set to

PC connecting through HDMI/DVI cable.

✎

“Frequency” displays the frequency (60Hz only)

when the resolution is set to PC.

■ 3D → 2D (Off / On): Displays the image for the left eye

only.

✎

This function is deactivated when 3D Mode set to

“2D → 3D” or Off.

■ 3D View Point: The overall adjustment of 3D

perspective.

✎

This function is deactivated when 3D Mode set to

“2D → 3D” or Off.

■ Depth: Adjusts focus / depth in “2D → 3D” mode.

✎

This function is only activated when the 3D Mode

is “2D → 3D”.

■ Picture Correction: Adjusts the images for the left and

right eye.

■ 3D Auto View (Off / On): If 3D Auto View is set to On,

a “Side by Side” format HDMI signal with one of the

resolutions below is automatically switched to 3D. Here,

correct 3D information must be sent from the Standard

HDMI 3D Format.

✎

If a 3D failure occurs due to a 3D information error,

set 3D Auto View to Off and manually select a

3D Mode using the 3D button or corresponding

menu.

✎

Support resolution (16:9 only)

Resolution Frequency (Hz)

1280 x 720p 50 / 60 Hz

1920 x 1080i 50 / 60 Hz

1920 x 1080p 24 / 30 / 50 / 60 Hz

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x

1080 input.

An input resolution other than 1920 x 1080 may not be

displayed properly in 3D display or full screen mode.

[PC680_XE]BN68-03142B-01L05.indb 19 2010-09-27 오후 4:17:49

20

English

Basic Features

How to watch the 3D image

1. Press the 3D button.

To watch in 3D, wear 3D Active Glasses and press the

power button on the glasses.

2. Select OK, then press the ENTER



button.

3. Using the ◄ or ► buttons on your remote control,

selects the 3D Mode of the image you want to view.

✎

Some 3D modes may not be available depending

on the format of the image source.

Supported formats and operating speciﬁcations for

Standard HDMI 3D

✎

The 3D formats indicated below are recommended by

the HDMI association and must be supported.

Source signal format Standard HDMI 1.4 3D

1920x1080p @ 24Hz x 2 1920x2205p @ 24Hz

1280x720p @ 60Hz x 2 1280x1470p @ 60Hz

1280x720p @ 50Hz x 2 1280x1470p @ 50Hz

The mode is automatically switched to 3D mode for the 3D

video input in one of the formats above.

Before using 3D function...

✎

NOTE

x

You may notice a small amount of screen flickering

when watching 3D images in poor light conditions

(from a strobe light, etc.), or under a fluorescent lamp

(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the

light or turn the lamp off.

x

3D mode is automatically disabled in following cases:

when changing a channel or the input source, or

accessing Media Play or Internet@TV.

x

Some Picture functions are disabled in 3D mode.

x

PIP and Data broadcasts (MHEG / MHP) are not

supported in 3D mode.

x

3D Active Glasses from other manufacturers may not

be supported.

x

When the TV is initially powered on, may take some

time until the 3D display is optimized.

x

The 3D Active Glasses may not work properly if there

is any other 3D product or electronic devices turned

on near the glasses or TV. If there is a problem, keep

other electronic devices as far away as possible from

the 3D Active Glasses.

x

When watching pictures from a 50Hz 3D source with

its Game mode On, visually-sensitive viewers may

see some flicker on bright images.

x

Photos of Media Play are shown in “2D → 3D”

mode only.

x

If you lie on your side while watching TV with 3D

active glasses, the picture may look dark or may not

be visible.

x

Be sure to stay within the viewing angle and optimum

TV viewing distance when watching 3D pictures.

– Otherwise, you may not be able to enjoy proper 3D

effects.

x

The ideal viewing distance should be three times

or more the height of the screen. We recommend

sitting with viewer’s eyes on a level with the screen.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

 Setting up the TV with Your PC

Set the input source to PC.

Auto Adjustment



Adjust frequency values/positions and ﬁne tune the settings

automatically.

✎

Not available when connecting with an HDMI/DVI cable.

Screen

■ Coarse / Fine: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the centre of screen.

■ Position: Adjust the PC screen position with direction

button (▲ / ▼ / ◄ / ►).

■ Image Reset: Resets the image to default settings.

3D

OK

To watch in 3D, wear 3D glasses and

press the power button on the glasses.

Viewing 3D TV motion pictures for long

periods may cause eye fatigue and/or

dizziness.

Cancel



Move



Enter



Exit

3D3D

Using the LEFT / RIGHT keys on the remote control,

select the icon suitable for the picture on screen.

Using the LEFT / RIGHT keys on the remote control,

select the icon suitable for the picture on screen.



Move



Enter



Exit



Move



Enter



Exit

[PC680_XE]BN68-03142B-01L05.indb 20 2010-09-27 오후 4:17:50

Sidan laddas ...

Samsung PS50C685G5S Användarmanual

Samsung PS50C685G5S Användarmanual

på andra språk

Relaterade papper

Andra dokument