AEG DCE5980HM Bruksanvisning

Kategori
Fläktar
Typ
Bruksanvisning
User manual
Cooker Hood
EN
Gebrauchsanleitung
Abzugshaube
DE
Manuel de l’utilisateur
Hotte de Cuisine
FR
Gebruiksaanwijzing
Afzuigkap
NL
Manual de uso
Campana
ES
Livro de instruções
para utilização
Exaustor
PT
Libretto di uso
Cappa
IT
Användningshandbok
Köksfläkt
SV
Bruksveiledning
Kjøkkenvifte
NO
Käyttöohjeet
Liesituuletin
FI
Brugsvejledning
Emhætte
DA
Руководство по
эксплуатации
Вытяжка
RU
ET Kasutusjuhend
Pliidikumm
LV Lietošanas pamācība
Nosūcējs
LT Naudotojo vadovas
Gartraukis
UK Інструкція з експлуатації
Витяжка
Használati útmutató
Szagelszívó
HU
DCE5980HM
DCE5280HM
2
www.aeg.com
CONTENTS
1. RECOMMENDATIONS AND SUGGESTIONS
..................................................................
3
2. USE
...........................................................................................................................................
5
3. MAINTENANCE
......................................................................................................................
5
4. CONTROLS
.............................................................................................................................
6
5. REMOTE CONTROL
.............................................................................................................
7
6. LIGHTING
................................................................................................................................
7
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not nd on ordinary appliances. Please spend a few minutes reading
to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data
available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
3
ENGLISH
1. RECOMMENDATIONS AND SUGGESTIONS
The Instructions for Use apply to several versions of
this appliance. Accordingly, you may nd descriptions
of individual features that do not apply to your specic
appliance.
The manufacturer will not be held liable for any damages
resulting from incorrect or improper installation.
The minimum safety distance between the cooker top
and the extractor hood is 650 mm (some models can be
installed at a lower height, please refer to the paragraphs
on working dimensions and installation).
Check that the mains voltage corresponds to that indi-
cated on the rating plate xed to the inside of the hood.
For Class I appliances, check that the domestic power
supply guarantees adequate earthing. Connect the ex-
tractor to the exhaust ue through a pipe of minimum
diameter 120 mm. The route of the ue must be as short
as possible.
Do not connect the extractor hood to exhaust ducts car-
rying combustion fumes (boilers, replaces, etc.).
If the extractor is used in conjunction with non-electrical
appliances (e.g. gas burning appliances), a sufcient
degree of aeration must be guaranteed in the room
in order to prevent the backow of exhaust gas. The
kitchen must have an opening communicating directly
with the open air in order to guarantee the entry of clean
air. When the cooker hood is used in conjunction with
appliances supplied with energy other than electric, the
negative pressure in the room must not exceed 0,04
mbar to prevent fumes being drawn back into the room
by the cooker hood.
In the event of damage to the power cable, it must be
replaced by the manufacturer or by the technical service
department, in order to prevent any risks.
If the instructions for installation for the gas hob specify
a greater distance specied above, this has to be taken
into account. Regulations concerning the discharge of air
have to be fullled.
Use only screws and small parts in support of the hood.
4
www.aeg.com
Warning: Failure to install the screws or xing device in
accordance with these instructions may result in electri-
cal hazards.
Connect the hood to the mains through a two-pole switch
having a contact gap of at least 3 mm.
Do not ambè under the range hood; risk of re.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruc-
tion concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
CAUTION: Accessible parts may become hot when used
with cooking appliances.”
The symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equip-
ment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for
the environment and human health, which could other-
wise be caused by inappropriate waste handling of this
product. For more detailed information about recycling
of this product, please contact your local city ofce, your
household waste disposal service or the shop where you
purchased the product.
Switch off or unplug the appliance from the mains supply
before carrying out any maintenance work.
Clean and/or replace the Filters after the specied time
period (Fire hazard).
5
ENGLISH
2. USE
The extractor hood has been de-
signed exclusively for domestic use
to eliminate kitchen smells.
Never use the hood for purposes
other than for which it has been
designed.
Never leave high naked ames un-
der the hood when it is in operation.
Adjust the ame intensity to direct
it onto the bottom of the pan only,
making sure that it does not engulf
the sides.
Deep fat fryers must be continu-
ously monitored during use: over-
heated oil can burst into ames.
3. MAINTENANCE
- The Activated charcoal lter is
not washable and cannot be re-
generated, and must be replaced
approximately every 4 months of
operation, or more frequently for
particularly heavy usage (W).
:
- The Grease lters must be cleaned
every 2 months of operation, or
more frequently for particularly
heavy usage, and can be washed
in a dishwasher (Z).
ZZ
- Control lights, if present.
Clean the hood using a damp cloth
and a neutral liquid detergent.
6
www.aeg.com
4. CONTROLS

   
Button Function Led
L
Turns the lights on/off at maximum strength. -
Press and hold the button for approximately 2 seconds to turn the Courtesy
Lights On/Off.
-
T1 Turns the motor on/off at speed one. -
T2 Turns the Motor on at speed two. -
Press and hold the button for approximately 5 seconds, with all the loads
turned off (Motor and Lights), to turn the Activated Charcoal Filter alarm on.
The relevant LED ashes twice to conrm.
To turn the alarm off, press the button again and hold for at least 5 seconds.
The relevant LED ashes once.
Flashing.
T3 Turns the Motor on at speed three. -
Press and hold the button for approximately 3 seconds, with all the loads turned
off (Motor and Lights), to perform a reset. The LED S1 ashes three times.
Flashing.
T4 Turns the Motor on at INTENSIVE Speed.
This speed is timed to run for 6 minutes. At the end of this time, the system
returns automatically to the speed that was set before. If it is activated with the
motor turned off, the hood will switch to OFF at the end of the time.
-
Press and hold for 5 seconds to enable the remote control, indicated by the
LED ashing twice.
Press and hold for 5 seconds to disable the remote control, indicated by the
LED ashing just once.
Flashing.
S1 Signals the Metal Grease Filter saturation alarm, indicating that it is necessary
to wash the lters. The alarm is triggered after the Hood has been in operation
for 100 working hours.
Fixed.
When this is activated, it signals the Activated Charcoal Filter saturation alarm,
indicating that the lter must be changed; the Metal Grease Filters must also
be washed. The Activated Charcoal Filter saturation alarm comes into operation
after the Hood has been working for 200 hours.
Flashing.
7
ENGLISH
5. REMOTE CONTROL
The appliance can be controlled using a remote
control powered by a 1.5 V carbon-zinc alkaline
batteries of the standard LR03-AAA type (not
included).
Do not place the remote control near to
heat sources.
Used batteries must be disposed of in the
proper manner.
Motor Motor On / Off.
-
Decreases the
working speed each
time it is pressed.
-
Increases the
working speed each
time it is pressed.
Intensive
Activates the
Intensive function.
- -
Light
Lights On / Off.
Press and hold for
2sec to turn the
Hood lights On/Off at
reduced intensity.
6. LIGHTING
For replacement contact technical support
("To purchase contact technical support").
8
www.aeg.com
INHALT
1. EMPFEHLUNGEN UND HINWEISE
...................................................................................
9
2. GEBRAUCH
..........................................................................................................................
11
3. WARTUNG
.............................................................................................................................
11
4. BEDIENELEMENTE
.............................................................................................................
12
5. FERNBEDIENUNG
..............................................................................................................
13
6. BELEUCHTUNG
...................................................................................................................
13
FÜR PERFEKTE ERGEBNISSE
Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen,
damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen
Technologien, die Ihnen das Leben erleichtern, protieren können. Es ist mit Funktionen
ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein
paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
Besuchen Sie unsere Website, wo Sie:
Tipps für den Gebrauch nden, unsere Broschüren herunterladen, etwaige Probleme
lösen und Informationen zum Kundendienst erhalten können:
www.aeg.com
Ihr Produkt registrieren und so besseren Kundendienst erhalten können:
www.registeraeg.com
Zubehör, Verbrauchsmaterial und Original-Ersatzteile für Ihr Gerät bestellen können:
www.aeg.com/shop
KUNDENDIENST UND WARTUNG
Verwenden Sie stets Original-Ersatzteile.
Bevor Sie die autorisierte Kundendienststelle kontaktieren, legen Sie sich bitte die folgenden
Daten zurecht: Modell, Artikelnummer (PNC), Seriennummer.
Diese Angaben nden Sie auf dem Typenschild des Geräts.
Hinweis / Achtung - Für die Sicherheit wichtige Informationen
Allgemeine Tipps und Informationen
Informationen zum Umweltschutz
Vorbehaltlich Änderungen.
9
GERMAN
1. EMPFEHLUNGEN UND HINWEISE
Diese Gebrauchsanleitungen beziehen sich auf die ver-
schiedenen Modelle der Abzugshaube. Darum kann es
möglich sein, dass die Beschreibung bestimmter Merkmale
für das vorliegende Gerät nicht zutrifft.
Der Hersteller haftet nicht für etwaige Schäden, die durch
die fehlerhafte Installation oder falschen Gebrauch ent-
stehen könnten.
Der min. Sicherheitsabstand zwischen Kochfeld und Ab-
zugshaube beträgt 650 mm (einige Modelle können auch
niedriger installiert werden; siehe Absatz Installation).
Kontrollieren Sie, ob die Netzspannung den Daten des
Typenschilds im Innern der Haube entspricht.
Für Geräte der Klasse I muss kontrolliert werden, ob
das häusliche Versorgungsnetz korrekt geerdet ist. Die
Absaughaube mit Hilfe eines Rohrs mit einem Mindest-
durchmesser von 120 mm mit dem Rauchabzug ver-
binden. Der Verlauf des Rauchabzugs soll so kurz wie
möglich sein.
Die Abzugshaube darf nicht an einen Schacht ange-
schlossen werden, in den Rauchgase geleitet werden (z.
B. von Heizkessel, Kaminen, usw.).
Falls in dem Raum neben dem Abzug auch nicht mit
Strom betriebene Geräte (zum Beispiel Gasgeräte) ein-
gesetzt werden, muss für eine ausreichende Belüftung
gesorgt werden, damit der Rückuss der Abgase ver-
hindert wird. Die Küche muss eine direkte Öffnung nach
Außen aufweisen, damit ein ausreichender Luftaustausch
gewährleistet wird. Wird die Abzugshaube zusammen mit
nicht mit Strom betriebenen Geräte eingesetzt, darf der
Unterdruck im Raum 0,04 mbar nicht überschreiten, damit
die Abgase nicht wieder angesaugt werden.
Schadhafte Kabel müssen durch den Hersteller oder vom
Kundendienst ausgewechselt werden, damit jedes Risiko
ausgeschlossen wird.
Falls die Montageanweisungen für die gasbetriebene
Kochmulde einen größeren Abstand vorschreiben, als der
oben angegebene, muss diese Vorgabe befolgt werden.
Es sind sämtliche Abluftvorschriften zu beachten.
10
www.aeg.com
Nur für die Abzugshaube geeignete Schrauben und
Kleinteile verwenden.
Achtung: Werden die Schrauben und Befestigungsele-
mente nicht entsprechend der vorliegenden Anleitungen
verwendet, besteht Stromschlaggefahr.
Die Abzugshaube mittels zweipoligem Schalter mit einer
Öffnung der Kontakte von mindestens 3 mm an das Netz
anschließen.
Auf keinen Fall unter der Haube ambieren: Brandgefahr.
Kinder ab 8 Jahren und Personen mit eingeschränkten
physischen, sensorischen oder psychischen Fähigkeiten,
oder mit mangelnden Erfahrungen oder Kenntnissen dürfen
nicht mit dem Gerät umgehen, es sei denn, sie werden
von einer für ihre Sicherheit verantwortlichen Person
beaufsichtigt oder angeleitet. Sicherstellen, dass Kinder
nicht mit dem Gerät herumspielen können. Reinigungs-
und Wartungsarbeiten dürfen nicht von unbeaufsichtigten
Kindern durchgeführt werden.
ACHTUNG: Die zugänglichen Teile können während des
Gebrauchs der Kochgeräte sehr heiß werden.
Das Symbol am Produkt oder auf der Verpackung weist
darauf hin, dass das Gerät nicht als normaler Hausmüll
entsorgt werden darf. Das ausrangierte Gerät muss viel-
mehr bei einer speziellen Sammelstelle für elektrische
und elektronische Geräte abgegeben werden. Mit der
vorschriftsmäßigen Entsorgung des Gerätes trägt der
Benutzer dazu bei, schädliche Auswirkungen auf Umwelt
und Gesundheit zu vermeiden. Weitere Informationen zum
Recycling dieses Produktes können bei der zuständigen
Behörde, der örtlichen Abfallbeseitigung oder bei dem
Händler, der das Gerät verkauft hat, eingeholt werden.
Vor Reinigungs- oder Wartungsarbeiten am Gerät, muss
dieses ausgeschaltet und spannungslos gemacht werden.
Die Filter stets nach den angegebenen Intervallen reinigen
oder auswechseln (Brandgefahr).
11
GERMAN
2. GEBRAUCH
Die Abzugshaube wurde aus-
schließlich für den häuslichen Ge-
brauch entwickelt, um Kochdünste
zu beseitigen.
Die Haube darf nur für die ihr zu-
gedachten Zwecke benutzt werden.
Unter der eingeschalteten Haube
keine offenen Flammen benutzen.
Die Flamme so regulieren, dass
sie nicht über den Boden des
Kochgeschirrs hinausreicht.
Fritteusen müssen während des
Gebrauchs ständig überwacht
werden: überhitztes Öl könnte sich
entzünden.
3. WARTUNG
- Der Aktivkohlelter ist weder wasch-
bar, noch regenerierbar und muss
bei normalem Betrieb zirka alle 4
Monate oder auch öfter ausge-
wechselt werden, je nach Intensität
des Gebrauchs (W).
:
- Die Fettlter sind alle 2 Monate
oder bei intensiver Nutzung öfter
zu reinigen und können in der
Spülmaschine gespült werden (Z).
ZZ
- Kontrolllampen der Steuerungen,
wo vorhanden.
Die Haube mit einem feuchten
Lappen und einem neutralen Rei-
nigungsmittel abwischen.
12
www.aeg.com
4. BEDIENELEMENTE

   
Taste Funktion LED
L Schaltet die Beleuchtung bei maximaler Intensität ein/aus. -
Mit zirka 2 Sekunden langem Gedrückthalten der Taste wird die Notbeleuchtung
aktiviert/deaktiviert.
-
T1 Schaltet den Motor bei der ersten Betriebsgeschwindigkeit ein/aus. -
T2 Schaltet den Motor bei der zweiten Betriebsgeschwindigkeit ein. -
Mit zirka 5 Sekunden langem Gedrückthalten der Taste bei abgeschalteten
Verbrauchern (Motor+Licht) wird der Alarm für aktive Aktivkohlelter aktiviert
und die entsprechende LED blinkt zweimal.
Zum Abstellen die Taste erneut 5 Sekunden lang drücken, die entsprechende
LED blinkt ein Mal.
Blinkend.
T3 Schaltet den Motor bei der dritten Betriebsgeschwindigkeit ein. -
Mit zirka 3 Sekunden langem Gedrückthalten der Taste bei abgeschalteten
Verbrauchern (Motor+Licht) erfolgt ein Reset und die LED S1 blinkt drei Mal.
Blinkend.
T4 Schaltet den Motor bei INTENSIVGESCHWINDIGKEIT ein.
Diese Geschwindigkeit ist auf 6 Minuten zeitgeregelt. Nach Ablauf dieser Zeit
kehrt das System zu der zuvor eingestellten Geschwindigkeit zurück. Wird sie
bei abgestelltem Motor aktiviert, wird nach Ablauf der Zeit zum Betriebsmodus
OFF übergegangen.
-
Mit 5 Sekunden langem Drücken wird die Fernbedienung aktiviert und die
entsprechende LED blinkt zwei Mal.
Mit 5 Sekunden langem Drücken wird die Fernbedienung deaktiviert und die
entsprechende LED blinkt nur ein Mal.
Blinkend.
S1 Meldet den Alarm für Sättigung der Metallfettlter und die Notwendigkeit,
diese zu waschen. Dieser Alarm wird nach 100 effektiven Betriebsstunden der
Abzugshaube ausgelöst.
Bleibend.
Meldet, sofern aktiviert, den Alarm für Sättigung des Aktivkohlelters, der
ausgewechselt werden muss; auch die Metallfettfilter müssen gewaschen
werden. Der Alarm für Sättigung des Aktivkohlelters wird nach 200 effektiven
Betriebsstunden der Abzugshaube ausgelöst.
Blinkend.
13
GERMAN
5. FERNBEDIENUNG
Dieses Gerät kann mit einer Fernbedienung
gesteuert werden, welche mit alkalischen
Zink-Kohle-Batterien 1,5 V des Standardtyps
LR03-AAA versorgt wird (nicht mitgeliefert).
Die Fernbedienung nicht in die Nähe von
Hitzequellen legen.
Batterien müssen vorschriftsmäßig entsorgt
werden.
Motor Motor On / Off.
-
Vermindert bei
jedem Drücken die
Betriebsgeschwindigkeit.
-
Erhöht bei jedem Drücken
die.Betriebsgeschwindigkeit.
Intensiv-
geschwindigkeit
Aktiviert
dieIntensivgeschwindigkeit.
- -
Beleuchtung
On / Off Beleuchtung.
Mit 2 Sekunden langem
Drücken wird die
Beleuchtung der Haube bei
verminderter Intensität ein/
ausgeschaltet.
6. BELEUCHTUNG
LED-Strahler
Für den Austausch der LED-Strahler wen-
den Sie sich bitte an den Kundendienst.
14
www.aeg.com
SOMMAIRE
1. CONSEILS ET SUGGESTIONS
........................................................................................
15
2. UTILISATION
.........................................................................................................................
18
3. ENTRETIEN
..........................................................................................................................
18
4. COMMANDES
.......................................................................................................................
19
5. TELECOMMANDE
...............................................................................................................
20
6. ÉCLAIRAGE
..........................................................................................................................
20
POUR DES RÉSULTATS PARFAITS
Merci d’avoir choisi ce produit AEG. Nous l’avons conçu pour qu’il vous offre des
performances irréprochables pour longtemps, en intégrant des technologies innovantes qui
vous simplient la vie grâce à des caractéristiques que vous ne trouverez pas forcément
sur des appareils ordinaires. Veuillez prendre quelques instants pour lire cette notice an
d’utiliser au mieux votre appareil.
Visitez notre site web pour:
Recevoir des conseils d’utilisation, télécharger nos brochures, résoudre des
problèmes éventuels et obtenir des renseignements sur le service après-vente:
www.aeg.com
Enregistrer votre produit et obtenir un meilleur service:
www.registeraeg.com
Acheter des accessoires, des consommables et des pièces de rechange d’origine
pour votre appareil:
www.aeg.com/shop
SERVICE APRES-VENTE ET ENTRETIEN
Nous vous conseillons de toujours utiliser des pièces de rechange d’origine.
Lorsque vous contactez le Service Après-Vente agréé, munissez-vous des données
suivantes : Modèle, Code produit (PNC), Numéro de série.
Les informations se trouvent sur la plaque des données.
Avertissement / Attention – Informations importantes pour la sécurité
Conseils et suggestions
Informations sur l’environnement
Sous réserve de modications.
15
FRENCH
1. CONSEILS ET SUGGESTIONS
Les instructions pour l’utilisation se réfèrent aux différents
modèles de cet appareil. Par conséquent, certaines
descriptions de caractéristiques particulières pourraient
ne pas appartenir spéciquement à cet appareil.
En aucun cas le fabricant ne peut être tenu pour res-
ponsable d’éventuels dommages dus à une installation
ou à une utilisation impropre.
La distance de sécurité minimum entre le plan de cuisson
et la hotte aspirante est de 650 mm (certains modèles
peuvent être installés à une hauteur inférieure ; voir
le paragraphe concernant les dimensions de travail et
l’installation).
Assurez-vous que la tension de votre secteur correspond
à celle indiquée sur la plaque des données appliquée
à l’intérieur de la hotte.
Pour les appareils de Classe I, s’assurer que l’installation
électrique de votre intérieur dispose d’une mise à la terre
adéquate. Relier l’aspirateur au conduit de cheminée
avec un tube d’un diamètre minimum de 120 mm. Le
parcours des fumées doit être le plus court possible.
Ne pas relier la hotte aspirante aux conduits de che-
minée qui acheminent les fumées de combustion (par
exemple de chaudières, de cheminées, etc.).
Si vous utilisez l’aspirateur en combinaison avec des
appareils non électriques (par ex. appareils à gaz), vous
devez garantir un degré d’aération sufsant dans la pièce,
an d’empêcher le retour du ux des gaz de sortie.
La cuisine doit présenter une ouverture communiquant
directement vers l’extérieur pour garantir l’amenée d’air
propre. Si vous utilisez la hotte de cuisine en combinai-
son avec des appareils non alimentés à l’électricité, la
pression négative dans la pièce ne doit pas dépasser
0,04 mbar an d’éviter que la hotte ne réaspire les
fumées dans la pièce.
Si le cordon d’alimentation est endommagé, veuillez le
faire remplacer par le fabricant ou par un service après-
vente agréé pour éviter tout risque d’accident.
Si les instructions d’installation du plan de cuisson à gaz
16
www.aeg.com
spécient une distance supérieure à celle indiquée ci-
dessus, veuillez impérativement en tenir compte. Toutes
les normes concernant l’évacuation de l’air doivent être
respectées.
Utiliser exclusivement des vis et des petites pièces du
type adapté pour la hotte.
Attention: toute installation des vis et des dispositifs de
xation non conforme aux présentes instructions peut
entraîner des risques de décharges électriques.
Brancher la hotte à l’alimentation de secteur avec un
interrupteur bipolaire ayant une ouverture des contacts
d’au moins 3 mm.
Ne pas amber des mets sous la hotte : sous risque
de provoquer un incendie.
Cet appareil n’est pas destiné à être utilisé par des enfants
d’un âge inférieur à 8 ans, ni par des personnes dont
les capacités physiques, sensorielles ou mentales sont
diminuées ou qui ont une expérience et des connais-
sances insufsantes, à moins que ces enfants ou ces
personnes ne soient attentivement surveillés et instruits
sur la manière d’utiliser cet appareil en sécurité et sur
les dangers que cela comporte. Assurez-vous que les
enfants ne jouent pas avec cet appareil. Le nettoyage
et l’entretien de la part de l’utilisateur ne doivent pas
être effectués par des enfants, à moins que ce ne soit
sous la surveillance d’une personne responsable.
ATTENTION: les parties accessibles peuvent devenir
très chaudes durant l’utilisation des appareils de cuisson.
Le symbole marqué sur le produit ou sur son embal-
lage indique que ce produit ne peut pas être éliminé
comme déchet ménager normal. Lorsque ce produit
doit être éliminé, veuillez le remettre à un centre de
collecte prévu pour le recyclage du matériel électrique
et électronique. En vous assurant que cet appareil est
éliminé correctement, vous participez à prévenir des
conséquences potentiellement négatives pour l'environ-
nement et pour la santé, qui risqueraient de se présenter
en cas d’élimination inappropriée. Pour toute information
supplémentaire sur le recyclage de ce produit, contactez
17
FRENCH
votre municipalité, votre déchetterie locale ou le magasin
où vous avez acheté ce produit.
Avant d’effectuer toute opération de nettoyage et d’entre-
tien, éteindre ou débrancher l’appareil du secteur.
Nettoyer et/ou remplacer les ltres après le délai indiqué
(danger d’incendie).
18
www.aeg.com
2. UTILISATION
Cette hotte aspirante a été conçue
exclusivement pour un usage
domestique, dans le but d’éliminer
les odeurs de cuisine.
Ne jamais utiliser la hotte pour
des objectifs différents de ceux
pour lesquels elle a été conçue.
Ne jamais laisser un feu vif allumé
sous la hotte lorsque celle-ci est
en fonction.
Régler l’intensité du feu de manière
à l’orienter exclusivement vers le
fond de la casserole, en vous
assurant qu’il ne déborde pas sur
les côtés.
Contrôler constamment les fri-
teuses durant leur utilisation : l’huile
surchauffée risque de s’incendier.
3. ENTRETIEN
- Le ltre à charbon actif ne peut
être ni lavé ni régénéré et il doit
être remplacé environ tous les 4
mois de fonctionnement ou plus
souvent en cas d’utilisation par-
ticulièrement intense (W).
:
- Nettoyer les ltres à graisse tous
les 2 mois de fonctionnement ou
plus souvent en cas d’utilisation
particulièrement intense. Ces
ltres peuvent être lavés au lave-
vaisselle (Z).
ZZ
- Voyants commandes si présents.
Nettoyer la hotte avec un chiffon
humide et un détergent liquide
neutre.
19
FRENCH
4. COMMANDES

   
Touche Fonction Led
L Allume/Éteint les lumières à la luminosité maximum. -
Garder la touche appuyée pendant environ 2 secondes pour Allumer/
Éteindre les lumières de courtoisie.
-
T1 Démarre/Coupe le moteur à la première vitesse. -
T2 Démarre le moteur à la deuxième vitesse. -
Garder la touche appuyée pendant environ 5 secondes, lorsque
toutes les charges sont éteintes (Moteur + Éclairage), l’alarme
des ltres au charbon actif s’active et la led correspondante
clignotera 2 fois.
Pour la désactiver, appuyer de nouveau sur la touche pendant
5 secondes. La led correspondante clignotera 1 fois.
Clignotante.
T3 Démarre le moteur à la troisième vitesse. -
Garder la touche appuyée pendant environ 3 secondes, lorsque
toutes les charges sont éteintes (Moteur+ Éclairage), le reset est
effectué et la led S1 correspondante clignotera 3 fois.
Clignotante.
T4 Démarre le moteur à la vitesse INTENSIVE.
Cette vitesse est temporisée à 6 minutes. Après ce délai, Le
système retourne automatiquement à la vitesse sélectionnée.
Si activée avec le moteur à l’arrêt, à la n du délai le système
passe en mode OFF.
-
Garder la touche appuyée pendant environ 5 secondes pour
valider la télécommande. La led correspondante clignotera 2 fois.
Garder la touche appuyée pendant 5 secondes pour invalider la
télécommande. La led correspondante clignotera 1 seule fois.
Clignotante.
S1 Signale l’alarme saturation ltres à graisse métalliques et la
nécessité de les laver. L’alarme entre en fonction après 100
heures de travail effectif de la hotte.
Fixe.
Lorsque l’alarme de saturation du ltre anti-odeur est activée,
c’est l’indice que le ltre doit être remplacé. Laver aussi les
ltres à graisse métalliques. L’alarme de saturation ltre anti-
odeur au charbon actif entre en fonction après 200 heures de
travail effectif de la hotte.
Clignotante.
20
www.aeg.com
5. TELECOMMANDE
Il est possible de commander cet appareil au
moyen d’une télécommande, alimentée avec
des piles alcalines zinc-charbon 1,5 V du type
standard LR03-AAA25 (ne fournis pas).
Ne pas ranger la télécommande à proximité
de sources de chaleur.
Ne pas jeter les piles; il faut les déposer
dans les ré-cipients de récolte spécialement
prévus à cet effet.
Moteur On / Off Moteur.
-
Diminue la vitesse
de fonctionnement à
chaque appui.
-
Augmente la vitesse
de fonctionnement à
chaque appui.
Intensive
Active la fonction
Intensive.
- -
Éclairage
On / Off Éclairage.
Appuyer sur la touche
pendant 2 sec. pour
allumer/éteindre
l’éclairage de la hotte
à intensité réduite.
6. ÉCLAIRAGE
Pour le remplacement, contacter le Service
après-vente (« Pour l’achat, s’adresser au
service après-vente »).
1 / 1