Electrolux HKK670MF Användarmanual

HKK670MF

User Manual

Hob

EN 2

Brugsanvisning

Kogesektion

DA 23

Käyttöohje

Keittotaso

FI 44

Bruksanvisning

Platetopp

NO 65

Bruksanvisning

Inbyggnadshäll

SV 85

electrolux.com/register

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings

with it decades of professional experience and innovation. Ingenious and stylish, it has

been designed with you in mind. So whenever you use it, you can be safe in the

knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.electrolux.com/support

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data

available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

CONTENTS

1. SAFETY INFORMATION................................................................................................ 2

2. SAFETY INSTRUCTIONS.............................................................................................. 4

3. INSTALLATION...............................................................................................................6

4. PRODUCT DESCRIPTION.............................................................................................8

5. DAILY USE......................................................................................................................9

6. FLEXIBLE INDUCTION COOKING AREA....................................................................13

7. HINTS AND TIPS..........................................................................................................16

8. CARE AND CLEANING................................................................................................ 18

9. TROUBLESHOOTING.................................................................................................. 18

10. TECHNICAL DATA..................................................................................................... 20

11. ENERGY EFFICIENCY...............................................................................................21

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible

for any injuries or damage that are the result of incorrect

2 ENGLISH

installation or usage. Always keep the instructions in a safe

and accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Children between 3 and 8 years of age and persons with

very extensive and complex disabilities shall be kept away

from the appliance unless continuously supervised.

• Children of less than 3 years of age should be kept away

from the appliance unless continuously supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

• WARNING: Keep children and pets away from the

appliance when it operates or when it cools down.

Accessible parts become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

1.2 General Safety

• WARNING: The appliance and its accessible parts become

hot during use. Care should be taken to avoid touching

heating elements.

• WARNING: Unattended cooking on a hob with fat or oil can

be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• CAUTION: The appliance must not be supplied through an

external switching device, such as a timer, or connected to

a circuit that is regularly switched on and off by a utility.

ENGLISH 3

• CAUTION: The cooking process has to be supervised. A

short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot.

• Do not use the appliance before installing it in the built-in

structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do

not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains. In

case the appliance is connected to the mains directly using

junction box, remove the fuse to disconnect the appliance

from power supply. In either case contact the Authorised

Service Centre.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to the

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from other

appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture from causing swelling.

4 ENGLISH

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance next to a door

or under a window. This prevents hot

cookware from falling from the appliance

when the door or the window is opened.

• Each appliance has cooling fans on the

bottom.

• If the appliance is installed above a

drawer:

– Do not store any small pieces or

sheets of paper that could be pulled

in, as they can damage the cooling

fans or impair the cooling system.

– Keep a distance of minimum 2 cm

between the bottom of the appliance

and parts stored in the drawer.

• Remove any separator panels installed in

the cabinet below the appliance.

2.2 Electrical Connection

WARNING!

Risk of fire and electric shock.

• All electrical connections should be made

by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that

it cannot be removed without tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and electric

shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first

use.

• This appliance is for household use only.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “off” after each

use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet

hands or when it has contact with water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is cracked,

disconnect immediately the appliance

from the power supply. This to prevent an

electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

ENGLISH 5

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it may

splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases can

cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause fire at a lower temperature than

oil used for the first time.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the control

panel.

• Do not put a hot pan cover on the glass

surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware

fall on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron, aluminium or

with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you

have to move them on the cooking

surface.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

2.4 Care and cleaning

• Clean the appliance regularly to prevent

the deterioration of the surface material.

• Switch off the appliance and let it cool

down before cleaning.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do not

use abrasive products, abrasive cleaning

pads, solvents or metal objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use original

spare parts only.

• Concerning the lamp(s) inside this product

and spare part lamps sold separately:

These lamps are intended to withstand

extreme physical conditions in household

appliances, such as temperature,

vibration, humidity, or are intended to

signal information about the operational

status of the appliance. They are not

intended to be used in other applications

and are not suitable for household room

illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains electrical cable close to

the appliance and dispose of it.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the

information below from the rating plate. The

rating plate is on the bottom of the hob.

Serial number ...........................

6 ENGLISH

3.2 Built-in hobs

Only use the built-in hobs after you assemble

the hob into correct built-in units and work

surfaces that align to the standards.

3.3 Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable, use

the cable type: H05V2V2-F which

withstands a temperature of 90 °C or

higher. Speak to your local Service

Centre. The connection cable may only be

replaced by a qualified electrician.

3.4 Assembly

If you install the hob under a hood, please

see the installation instructions of the hood

for the minimum distance between the

appliances.

min.

50mm

min.

500mm

If the appliance is installed above a drawer,

the hob ventilation can warm up the items

stored in the drawer during the cooking

process.

min.

12

min.

60

min.

28

620

590

+1

280

ENGLISH 7

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

1

2

1

3

1

Induction cooking zone

2

Control panel

3

Flexible induction cooking area

consisting of four sections

4.2 Control panel layout

6 7 8

10

1

11

2

345

9

To see the control panel and the zone positions activate the appliance with

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which

functions operate.

Sensor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Hob²Hood To activate and deactivate the manual mode of the func‐

tion.

3

Pause To activate and deactivate the function.

4

/

- To increase or decrease the time.

5

- To set the timer function.

6

- Timer display To show the time in minutes.

7

FlexiBridge (Flexible Bridge) To switch between three modes of the function.

8

PowerSlide To activate and deactivate the function.

8 ENGLISH

Sensor

field

Function Comment

9

- Control bar To set a heat setting.

10

PowerBoost To activate the function.

11

Lock / Child Safety Device To lock / unlock the control panel.

4.3 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / As long as the

indicator is on, there is a risk of

burns from residual heat.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware. The

glass ceramic is heated by the heat of the

cookware.

The indicators

/ / appear when a

cooking zone is hot. They show the level of

the residual heat for the cooking zones you

are currently using.

The indicator may also appear:

• for the neighbouring cooking zones even

if you are not using them,

• when hot cookware is placed on cold

cooking zone,

• when the hob is deactivated but the

cooking zone is still hot.

The indicator disappears when the cooking

zone has cooled down.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

The control panel comes on after you

activate the hob and goes off after you

deactivate the hob.

When the hob is deactivated you can only

see .

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• you do not place any cookware on the

hob for 50 seconds,

• you do not set the heat setting for 50

seconds after you place the cookware,

• you spill something or put something on

the control panel for more than 10

seconds (a pan, a cloth). When you hear

the acoustic signal, the hob deactivates.

Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking zone

cool down before you use the hob again.

• you do not deactivate a cooking zone or

change the heat setting. After some time,

the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting The hob deactivates

after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

ENGLISH 9

5.3 Using the cooking zones

CAUTION!

Do not place hot cookware on

the control panel. There is a risk

of damage to the electronic

parts.

Place the cookware in the centre of the

selected zone. Induction cooking zones

adapt to the dimension of the bottom of the

cookware automatically.

Once the pot is detected, the heat setting 0

comes on.

5.4 Heat setting

Touch the control bar at the desired heat

setting or move your finger along the control

bar to set or change the heat setting for a

cooking zone.

Once you place a pot on the cooking zone

and set the heat setting, it remains the same

for 50 seconds after you remove the pot. The

control bar blinks for the second half of that

time. If you place the pot on the cooking zone

again within this time, the heat setting

reactivates. Otherwise the cooking zone

deactivates.

5.5 PowerBoost

This function activates more power for the

appropriate induction cooking zone,

depending on the cookware size. The

function can be activated only for a limited

period of time.

Touch to activate the function for the

cooking zone.

The function deactivates automatically.

For maximum duration values,

refer to "Technical data".

5.6 Timer

Count Down Timer

Use this function to specify how long a

cooking zone should operate during a single

cooking session.

First set the heat setting, then set the

function.

1. Touch to activate the function or

change the time.

The timer digits and the indicators

and come on the display.

If the timer is not set, and disappear

after 3 seconds.

2. Touch or to set the time (00 - 99

minutes).

After 3 seconds, the timer starts to count

down automatically. The indicators , and

disappear.

When the time comes to an end, a signal

sounds and

flashes. To stop the signal,

touch .

To deactivate the function: touch . The

indicators and come on. Use or

to set on the display. Alternatively, set

the heat level to 0. As a result, a signal

sounds and the timer is cancelled.

Minute Minder

You can use this function when the hob is

activated but no cooking zone operates.

10 ENGLISH

Place a pot on a cooking zone to see

symbol.

1. Touch to activate the function.

2. Touch

or to set the time.

The function starts automatically after 4

seconds.

When you set the function, you can remove

the pot.

When the time comes to an end, a signal

sounds and flashes. Touch to stop

the signal.

To deactivate the function: touch . The

indicators and light up. Use or

to set on the display.

The function has no effect on the

operation of any cooking zone.

5.7 Pause

This function sets all cooking zones that

operate to the lowest heat setting.

When the function is active, , or

symbols can be used.

Touch to activate the function.

The heat setting is lowered to 1.

To deactivate the function, touch . The

previous heat setting comes on.

5.8 Lock

You can lock the control panel while the hob

operates. It prevents an accidental change of

the heat setting.

Set the heat setting first.

Touch to activate the function.

To deactivate the function, touch .

When you deactivate the hob,

you also deactivate this function.

5.9 Child Safety Device

This function prevents an accidental

operation of the hob.

Activate the hob first and do not set the heat

setting.

Touch until signal sounds and the

indicator comes on to activate the function.

The control bars disappear. Deactivate the

hob.

When you deactivate the hob,

the function is still active.

To deactivate the function for only one

cooking time: Activate the hob with .

comes on. Touch until signal sounds and

the indicator comes off. The control bar

appears. Set the heat setting within 50

seconds.You can operate the hob. When you

deactivate the hob with the function is still

active.

To deactivate the function permanently:

Activate the hob and do not set the heat

setting. Touch until signal sounds and the

indicator comes off. The control bars appear.

Deactivate the hob.

5.10 OffSound Control

(Deactivating and activating the

sounds)

Deactivate the hob first.

1. Touch for 3 seconds to activate the

function.

The display comes on and goes out.

2. Touch for 3 seconds.

or comes on.

3. Touch

of the timer to choose one of

the following:

• - the sounds are off

• - the sounds are on

4. Wait until the hob deactivates

automatically to confirm your selection.

When the function is set to you can hear

the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

5.11 Power management

If multiple zones are active and the

consumed power exceeds the limitation of

the power supply, this function divides the

available power between all cooking zones.

ENGLISH 11

The hob controls heat settings to protect the

fuses of the house installation.

• Cooking zones are grouped according to

the location and number of the phases in

the hob. Each phase has a maximum

electricity loading of 3680 W. If the hob

reaches the limit of maximum available

power within one phase, the power of the

cooking zones will be automatically

reduced.

• For cooking zones that have a reduced

power, the control panel shows the

maximum possible heat settings.

• If a higher heat setting is not available

reduce it for the other cooking zones first.

• The activation of the function depends on

the number and size of pots.

Refer to the illustration for possible

combinations in which power can be

distributed among the cooking zones.

5.12 Hob²Hood

It is an advanced automatic function which

connects the hob to a special hood. Both the

hob and the hood have an infrared signal

communicator. Speed of the fan is defined

automatically on the basis of the mode

setting and temperature of the hottest

cookware on the hob. You can also operate

the fan from the hob manually.

For most of the hoods, the

remote system is originally

deactivated. Activate it before

you use the function. For more

information refer to the hood

user manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 - H6. The hob is

originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes the temperature of the cookware

automatically and adjusts the speed of the

fan.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the hob.

To do so set the automatic mode to H1 - H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

Automatic modes

Auto‐

matic

light

Boiling

1)

Frying

2)

Mode H0 Off Off Off

Mode H1 On Off Off

Mode H2

3)

On Fan speed

1

Fan speed

1

Mode H3 On Off Fan speed

1

Mode H4 On Fan speed

1

Fan speed

1

Mode H5 On Fan speed

1

Fan speed

2

Mode H6 On Fan speed

2

Fan speed

3

1)

The hob detects the boiling process and acti‐

vates the fan speed in accordance with the au‐

tomatic mode.

2)

The hob detects the frying process and acti‐

vates the fan speed in accordance with the au‐

tomatic mode.

3)

This mode activates the fan and the light and

does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.

2. Touch for 3 seconds.

The display comes on and goes off.

3. Touch for 3 seconds.

4. Touch a few times until comes on.

5. Touch of the Timer to select an

automatic mode.

When you finish cooking and deactivate the

hob, the hood fan may still operate for a

certain period of time. After that time the

12 ENGLISH

system deactivates the fan automatically and

prevents you from an accidental activation of

the fan for the next 30 seconds.

To operate the hood directly on

the hood panel deactivate the

automatic mode of the function.

Operating the fan speed manually

You can also operate the fan from the hob

manually.

Touch

when the hob is active.

This deactivates automatic operation of the

function and allows you to change the fan

speed manually.

When you press , you raise the fan speed

by one. When you reach an intensive level

and press again, you set the fan speed to

0 which deactivates the hood fan. To start

the fan again with the fan speed 1 touch

.

To activate an automatic

operation of the function,

deactivate the hob and activate it

again.

6. FLEXIBLE INDUCTION COOKING AREA

WARNING!

Refer to Safety chapters.

6.1 FlexiBridge function

The flexible induction cooking area consists

of four sections. The sections can be

combined into two cooking zones with

different size, or into one large cooking area.

The sides of the zones which operate

together light up, and they are linked with

shorter illuminated lines. You choose the

combination of the sections by choosing the

mode applicable to the size of the cookware

you want to use. There are three modes:

Standard (activated automatically when you

activate the hob), Big Bridge and Max Bridge.

To set the heat setting use two

left side control bars.

Switching between the modes

To switch between the modes use sensor

field:

.

When you switch between the

modes the heat setting is set

back to 0.

Diameter and position of the cookware

Choose the mode applicable to the size and

the shape of the cookware. The cookware

should cover the selected area as much as

possible. Place the cookware centrally on the

selected area!

Place the cookware with the bottom diameter

smaller than 160 mm centrally on a single

section.

100-160mm

Place the cookware with the bottom diameter

larger then 160 mm centrally between two

sections.

ENGLISH 13

> 160 mm

6.2 FlexiBridge Standard mode

This mode is active when you activate the

hob. It connects the sections into two

separate cooking zones. The sides of the

zones which operate together in this mode

light up, and they are linked with shorter

illuminated lines. You can set the heat setting

for each zone separately. Use two left side

control bars.

Correct cookware position:

Incorrect cookware position:

6.3 FlexiBridge Big Bridge mode

To activate the mode touch until you see

the correct mode indicator . This mode

connects three rear sections into one cooking

zone. The front section is not connected and

operates as a separate cooking zone. You

can set the heat setting for each zone

separately. Use two left side control bars.

Correct cookware position:

To use this mode you have to place the

cookware on the three connected sections. If

you use cookware smaller than two sections

the control bar blinks and after 2 minutes the

zone switches off.

Incorrect cookware position:

14 ENGLISH

6.4 FlexiBridge Max Bridge mode

To activate the mode touch until you see

the correct mode indicator

. This mode

connects all sections into one cooking zone.

To set the heat setting use any of the two

control bars on the left side.

Correct cookware position:

To use this mode you have to place the

cookware on the four connected sections. If

you use cookware smaller than three

sections the control bar blinks and after 2

minutes the zone switches off.

Incorrect cookware position:

6.5 PowerSlide

This function allows you to adjust the

temperature by moving the cookware to a

different position on the induction cooking

area.

The function divides the induction cooking

area into three areas with different heat

settings. The hob detects the position of the

cookware and adjust the heat setting

corresponding with the position. You can

place the cookware in the front, middle or

rear position. If you place the cookware in the

front you get the highest heat setting. To

decrease it, move the cookware to middle or

rear position.

Use only one pot when you

operate the function.

If you want to change the heat

setting, lift up the cookware and

place it on a different zone.

Sliding the cookware can cause

scratches and discolouration of

the surface.

• 160 mm is the minimum bottom diameter

of the cookware for this function.

• If you place the pot in the front position,

lights up on the control panel. The

control bar displays the default heat

setting .

ENGLISH 15

• If you place the pot in the middle position,

lights up on the control panel. The

control bar displays the default heat

setting .

• If you place the pot in the rear position,

lights up on the control panel. The control

bar displays the default heat setting .

• To change the default heat setting use left

front control bar. You may change the

default heat setting only if the function is

active. You can change the heat settings

for each position separately. The hob will

remember your settings next time you

activate the function.

Touch to activate the function.

The indicator comes on and the control bar

displays the default heat setting.

To deactivate the function, touch .

7. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

7.1 Cookware

For induction cooking zones a

strong electro-magnetic field

creates the heat in the cookware

very quickly.

Use the induction cooking zones with

suitable cookware.

• The bottom of the cookware must be as

thick and flat as possible.

• Ensure pan bases are clean and dry

before placing on the hob surface.

• In order to avoid scratches, do not slide or

rub the pot across the ceramic glass.

Cookware material

• correct: cast iron, steel, enamelled steel,

stainless steel, multi-layer bottom (with a

correct marking from a manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is suitable for an induction hob

if:

• water boils very quickly on a zone set to

the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

Cookware dimensions

• Induction cooking zones adapt to the

dimension of the bottom of the cookware

automatically.

• The cooking zone efficiency is related to

the diameter of the cookware. The

cookware with a diameter smaller than the

minimum receives only a part of the

power generated by the cooking zone.

• For both safety reasons and optimal

cooking results, do not use cookware

larger than indicated in "Cooking zones

specification". Avoid keeping cookware

close to the control panel during the

cooking session. This might impact the

functioning of the control panel or

accidentally activate hob functions.

Refer to "Technical data".

7.2 The noises during operation

If you can hear:

• crack noise: cookware is made of different

materials (a sandwich construction).

• whistle sound: you use a cooking zone

with a high power level and the cookware

16 ENGLISH

is made of different materials (a sandwich

construction).

• humming: you use a high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not indicate

any malfunction.

7.3 Öko Timer (Eco Timer)

To save energy, the heater of the cooking

zone deactivates before the count down

timer sounds. The difference in the operation

time depends on the heat setting level and

the length of the cooking operation.

7.4 Examples of cooking

applications

The correlation between the heat setting of a

zone and its consumption of power is not

linear. When you increase the heat setting, it

is not proportional to the increase of the

consumption of power. It means that a

cooking zone with the medium heat setting

uses less than a half of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

1 Keep cooked food warm. as neces‐

sary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: butter, choco‐

late, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.

2 - 3 Simmer rice and milkbased dishes,

heat up ready-cooked meals.

25 - 50 Add at least twice as much liquid as

rice, mix milk dishes halfway through

the procedure.

3 - 4 Steam vegetables, fish, meat. 20 - 45 Add a couple of tablespoons of liquid.

4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g of po‐

tatoes.

4 - 5 Cook larger quantities of food, stews

and soups.

60 - 150 Up to 3 l of liquid plus ingredients.

6 - 7 Gentle fry: escalope, veal cordon bleu,

cutlets, rissoles, sausages, liver, roux,

eggs, pancakes, doughnuts.

as neces‐

sary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin steaks,

steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

7.5 Hints and Tips for Hob²Hood

When you operate the hob with the function:

• Protect the hood panel from direct

sunlight.

• Do not spot halogen light on the hood

panel.

• Do not cover the hob control panel.

• Do not interrupt the signal between the

hob and the hood (e.g. with the hand, a

cookware handle or a tall pot). See the

picture.

The hood in the picture is only exemplary.

ENGLISH 17

Other remotely controlled

appliances may block the signal.

Do not use any such appliances

near to the hob while Hob²Hood

is on.

Cooker hoods with the Hob²Hood function

To find the full range of cooker hoods which

work with this function refer to our consumer

website. The Electrolux cooker hoods that

work with this function must have the symbol

.

8. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

8.1 General information

• Clean the hob after each use.

• Always use cookware with a clean base.

• Scratches or dark stains on the surface

have no effect on how the hob operates.

• Use a special cleaner suitable for the

surface of the hob.

• Use a special scraper for the glass.

The printing on the flexible

induction cooking area may

become dirty or change its

colour from sliding the cookware.

You can clean the area in a

standard way.

8.2 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage to

the hob. Take care to avoid burns. Use a

special hob scraper on the glass surface

at an acute angle and move the blade on

the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration. Clean

the hob with a moist cloth and a non-

abrasive detergent. After cleaning, wipe

the hob dry with a soft cloth.

• Remove shiny metallic discoloration:

use a solution of water with vinegar and

clean the glass surface with a cloth.

9. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

9.1 What to do if...

Problem Possible cause Remedy

You cannot activate or operate

the hob.

The hob is not connected to an elec‐

trical supply or it is connected incor‐

rectly.

Check if the hob is correctly connected

to the electrical supply.

18 ENGLISH

Problem Possible cause Remedy

The fuse is blown. Make sure that the fuse is the cause of

the malfunction. If the fuse is blown

again and again, contact a qualified

electrician.

You do not set the heat setting for

50 seconds.

Activate the hob again and set the

heat setting in less than 50 seconds.

You touched 2 or more sensor fields

at the same time.

Touch only one sensor field.

Pause operates. Refer to "Daily use".

There is water or fat stains on the

control panel.

Clean the control panel.

You cannot select the maximum

heat setting for one of the cook‐

ing zones.

The other zones consume the maxi‐

mum available power.

Your hob works properly.

Reduce the heat setting of the other

cooking zones connected to the same

phase. Refer to "Power management".

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds when

the hob is deactivated.

You put something on one or more

sensor fields.

Remove the object from the sensor

fields.

The hob deactivates. You put something on the sensor

field .

Remove the object from the sensor

field.

Residual heat indicator does not

come on.

The zone is not hot because it oper‐

ated only for a short time or the sen‐

sor is damaged.

If the zone operated sufficiently long to

be hot, speak to an Authorised Service

Centre.

Hob²Hood does not work. You covered the control panel. Remove the object from the control

panel.

You use a very tall pot which blocks

the signal.

Use a smaller pot, change the cooking

zone or operate the hood manually.

The sensor fields become hot. The cookware is too large or you put

it too near to the controls.

Put large cookware on the rear zones,

if possible.

There is no sound when you

touch the panel sensor fields.

The sounds are deactivated. Activate the sounds. Refer to "Daily

use".

The flexible induction cooking

area does not heat up the cook‐

ware.

The cookware is in a wrong position

on the flexible induction cooking

area.

Place the cookware in the correct posi‐

tion on the flexible induction cooking

area. The position of the cookware de‐

pends on the activated function or

function mode. Refer to "Flexible in‐

duction cooking area".

The diameter of the bottom of the

cookware is incorrect for the activa‐

ted function or function mode.

Use cookware with a diameter applica‐

ble to the activated function or function

mode. Refer to "Flexible induction

cooking area".

comes on.

Child Safety Device or Lock oper‐

ates.

Refer to "Daily use".

The control bar blinks. There is no cookware on the zone or

the zone is not fully covered.

Put cookware on the zone so that it

fully covers the cooking zone.

The cookware is unsuitable. Use suitable cookware. Refer to "Hints

and tips".

ENGLISH 19

Problem Possible cause Remedy

The diameter of the bottom of the

cookware is too small for the zone.

Use cookware with correct dimen‐

sions. Refer to "Technical data".

FlexiBridge (Flexible Bridge) oper‐

ates. One or more sections of the

function mode which operates are

not covered by the cookware.

Place the cookware on the correct

number of sections of the function

mode which operates or change the

function mode. Refer to "Flexible in‐

duction cooking area".

comes on.

PowerSlide operates. Two pots are

placed on the flexible induction

cooking area.

Use only one pot. Refer to "Flexible in‐

duction cooking area".

and a number come on.

There is an error in the hob. Deactivate the hob and activate it

again after 30 seconds. If comes on

again, disconnect the hob from the

electrical supply. After 30 seconds,

connect the hob again. If the problem

continues, speak to an Authorised

Service Centre.

You can hear a constant beep

noise.

The electrical connection is incor‐

rect.

Disconnect the hob from the electrical

supply. Ask a qualified electrician to

check the installation.

9.2 If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre. Give the data

from the rating plate. Make sure, you

operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about the

Service Centre and conditions of guarantee

are in the guarantee booklet.

10. TECHNICAL DATA

10.1 Rating plate

Model HKK670MF PNC 949 599 175 00

Typ 62 B4A 21 AA 220 - 240 V / 400 V 2N 50 - 60 Hz

Induction 7.35 kW Made in Germany

Ser.Nr. ................. 7.35 kW

ELECTROLUX

10.2 Cooking zones specification

Cooking zone Nominal power

(maximum heat

setting) [W]

PowerBoost [W] PowerBoost

maximum dura‐

tion [min]

Cookware diame‐

ter [mm]

Right front 1400 2500 4 125 - 145

Right rear 1800 2800 10 145 - 180

20 ENGLISH

Sidan laddas...

Electrolux HKK670MF Användarmanual

Electrolux HKK670MF Användarmanual

på andra språk

Relaterade papper

Andra dokument