Store DAB radio stations manually
You can store up to 10 DAB radio stations as favorite stations for instant access.
1. Select a DAB radio station that you wish to preset.
2. Press and hold the MENU button to access the menu options, then press the TUNING ▲/▼ button to
select “Preset store”, and then press the SELECT button to confirm.
3. Press the TUNING ▲/▼ button to allocate a number from 1 to 10, then press the SELECT button to
confirm. “Preset X saved” is displayed. “X” is a number allocated to the current radio station.
Select a preset DAB radio station
In DAB mode, press a numeric button to select a preset DAB radio station.
Note: To select a preset number 6-10, first press a numeric button from “1” to “5”, then press the “5+”
numeric button.
FM radio
1. Press the DAB/FM button to select FM mode.
2. When switching on FM radio for the first time, the unit starts at the beginning of the FM frequency range
(87.50MHz). Otherwise, the last selected FM radio is broadcast.
3. Press and hold the TUNING ▲/▼ button to tune to a FM radio station. To fine tune a frequency, press
repeatedly the TUNING ▲/▼ button.
Set alarm
1. Press and hold the MENU button to enter the “System” menu, then press the TUNING ▲/▼ button to
scroll to “Alarm Setting”, and then press the SELECT button to select “Alarm 1 Setting” or “Alarm 2
Setting”.
2. The hour digits flash. Press the TUNING ▲/▼ button to set the hour for you alarm, then press the
SELECT button to confirm.
3. The minute digits flash. Press the TUNING ▲/▼ button to set the minute for you alarm, then press the
SELECT button to confirm.
4. The time digits for alarm duration flash. Press the TUNING ▲/▼ button to select an alarm duration from
15, 30, 45, 60 or 90 minutes, then press the SELECT button to confirm.
5. The alarm sound source flashes. Press the TUNING ▲/▼ button to select a sound source from Buzzer,
DAB or FM radio, then press the SELECT button to confirm.
6. “Daily” flashes in the display, press the TUNING ▲/▼ button to select a frequency from daily, Weekends,
Weekdays or Once, then press the SELECT button to confirm.
Note: If you select “Once”, you are prompted to set the date for your alarm.
7. Alarm Volume scrolls in the display. Press the TUNING ▲/▼ button to set the volume for your alarm,
then press the SELECT button to confirm.
8. “On” or “Off” flashes in the display. Press the TUNING ▲/▼ button to select “On”, then press the
SELECT button to confirm.
Note: To deactivate the alarm, select “Off”.
9. “Saved” is display. When an alarm is activated, in standby, a bell icon is displayed, together with “1” or “2”
(based on Alarm 1 or Alarm 2 is set).
4